I will now consolidate the main files and start enabling building of standalone core and client again.
-# Doxyfile 1.5.1-KDevelop
+# Doxyfile 1.5.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file that
+# follow. The default is UTF-8 which is also the encoding used for all text before
+# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
+# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
+# possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
PROJECT_NAME = "Quassel IRC"
-PROJECT_NUMBER = 0.1
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = Pre-Release
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
OUTPUT_DIRECTORY = doc
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
+# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
+# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
+# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
+
OUTPUT_LANGUAGE = English
-USE_WINDOWS_ENCODING = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
ABBREVIATE_BRIEF = "The $name class" \
"The $name widget" \
"The $name file" \
a \
an \
the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
INLINE_INHERITED_MEMB = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
FULL_PATH_NAMES = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
STRIP_FROM_PATH = /
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
STRIP_FROM_INC_PATH = /home/sputnick/devel/local-quassel/
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
SHORT_NAMES = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
JAVADOC_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
DETAILS_AT_TOP = YES
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
OPTIMIZE_OUTPUT_FOR_C = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
OPTIMIZE_OUTPUT_JAVA = NO
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
+# include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
DISTRIBUTE_GROUP_DOC = YES
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
SUBGROUPING = YES
+
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
EXTRACT_ALL = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
EXTRACT_PRIVATE = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
EXTRACT_STATIC = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
EXTRACT_LOCAL_CLASSES = NO
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
EXTRACT_LOCAL_METHODS = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
INTERNAL_DOCS = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
HIDE_SCOPE_NAMES = YES
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
SHOW_INCLUDE_FILES = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
SORT_MEMBER_DOCS = NO
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
SORT_BRIEF_DOCS = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
SHOW_DIRECTORIES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
FILE_VERSION_FILTER =
+
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
QUIET = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
WARN_LOGFILE =
+
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
-INPUT = gui \
- main \
- core \
- plugins
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = src
+
+# This tag can be used to specify the character encoding of the source files that
+# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default
+# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding.
+# See http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
+
FILE_PATTERNS = *.c \
*.cc \
*.cxx \
*.moc \
*.xpm \
*.dox
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
RECURSIVE = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the output.
+# The symbol name can be a fully qualified name, a word, or if the wildcard * is used,
+# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
EXAMPLE_PATTERNS = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
FILTER_SOURCE_FILES = YES
+
#---------------------------------------------------------------------------
# configuration options related to source browsing
#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
SOURCE_BROWSER = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
REFERENCES_RELATION = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code. Otherwise they will link to the documentstion.
+
REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
VERBATIM_HEADERS = YES
+
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
IGNORE_PREFIX =
+
#---------------------------------------------------------------------------
# configuration options related to the HTML output
#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
ENUM_VALUES_PER_LINE = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
GENERATE_TREEVIEW = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
TREEVIEW_WIDTH = 250
+
#---------------------------------------------------------------------------
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
PDF_HYPERLINKS = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
LATEX_HIDE_INDICES = NO
+
#---------------------------------------------------------------------------
# configuration options related to the RTF output
#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
RTF_HYPERLINKS = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
RTF_EXTENSIONS_FILE =
+
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
MAN_LINKS = NO
+
#---------------------------------------------------------------------------
# configuration options related to the XML output
#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
XML_PROGRAMLISTING = YES
+
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
GENERATE_AUTOGEN_DEF = NO
+
#---------------------------------------------------------------------------
# configuration options related to the Perl module output
#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
PERLMOD_MAKEVAR_PREFIX =
+
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
MACRO_EXPANSION = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
INCLUDE_PATH = /usr/include/qt4
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
SKIP_FUNCTION_MACROS = NO
+
#---------------------------------------------------------------------------
# Configuration::additions related to external references
#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
GENERATE_TAGFILE = quassel.tag
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
ALLEXTERNALS = YES
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
PERL_PATH = /usr/bin/perl
+
#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to
+# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to
+# specify the directory where the mscgen tool resides. If left empty the tool is assumed to
+# be found in the default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
HAVE_DOT = YES
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
UML_LOOK = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
CALL_GRAPH = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a caller dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+
CALLER_GRAPH = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 1024
-MAX_DOT_GRAPH_HEIGHT = 1024
-MAX_DOT_GRAPH_DEPTH = 1000
+
+# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen will always
+# show the root nodes and its direct children regardless of this setting.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+
DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
DOT_CLEANUP = YES
+
#---------------------------------------------------------------------------
# Configuration::additions related to the search engine
#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
SEARCHENGINE = NO
# KDevelop Custom Project File List
-client
-client/buffer.cpp
-client/buffer.h
-client/client.cpp
-client/client.h
-client/clientproxy.cpp
-client/clientproxy.h
-CMakeLists.txt
-common
-common/CMakeLists.txt
-common/global.cpp
-common/global.h
-common/logger.cpp
-common/logger.h
-common/main_core.cpp
-common/main_gui.cpp
-common/main_mono.cpp
-common/message.cpp
-common/message.h
-common/proxy_common.h
-common/settings.cpp
-common/settings.h
-common/util.cpp
-common/util.h
-core
-core/backlog.cpp
-core/backlog.h
-core/CMakeLists.txt
-core/core.cpp
-core/core.h
-core/coreproxy.cpp
-core/coreproxy.h
-core/server.cpp
-core/server.h
-core/sqlitestorage.cpp
-core/sqlitestorage.h
-core/storage.cpp
-core/storage.h
-plugins
-plugins/plugin.h
-qtgui
-qtgui/bufferview.cpp
-qtgui/bufferview.h
-qtgui/bufferviewwidget.cpp
-qtgui/bufferviewwidget.h
-qtgui/bufferwidget.cpp
-qtgui/bufferwidget.h
-qtgui/channelwidgetinput.cpp
-qtgui/channelwidgetinput.h
-qtgui/chatwidget.cpp
-qtgui/chatwidget.h
-qtgui/CMakeLists.txt
-qtgui/coreconnectdlg.cpp
-qtgui/coreconnectdlg.h
-qtgui/identities.cpp
-qtgui/identities.h
-qtgui/mainwin.cpp
-qtgui/mainwin.h
-qtgui/serverlist.cpp
-qtgui/serverlist.h
-qtgui/settingsdlg.cpp
-qtgui/settingsdlg.h
-qtgui/settingspages.cpp
-qtgui/settingspages.h
-qtgui/style.cpp
-qtgui/style.h
-qtgui/tabcompleter.cpp
-qtgui/tabcompleter.h
-qtgui/ui
-qtgui/ui/aboutdlg.ui
-qtgui/ui/buffermgmntsettingspage.ui
-qtgui/ui/bufferviewwidget.ui
-qtgui/ui/bufferwidget.ui
-qtgui/ui/channelwidget.ui
-qtgui/ui/connectionsettingspage.ui
-qtgui/ui/coreconnectdlg.ui
-qtgui/ui/coresettingspage.ui
-qtgui/ui/identitiesdlg.ui
-qtgui/ui/identitieseditdlg.ui
-qtgui/ui/ircwidget.ui
-qtgui/ui/mainwin.ui
-qtgui/ui/networkeditdlg.ui
-qtgui/ui/nickeditdlg.ui
-qtgui/ui/servereditdlg.ui
-qtgui/ui/serverlistdlg.ui
-qtgui/ui/settingsdlg.ui
+Makefile
+src
+src/client
+src/client/buffer.cpp
+src/client/buffer.h
+src/client/client.cpp
+src/client/client.h
+src/client/clientproxy.cpp
+src/client/clientproxy.h
+src/CMakeLists.txt
+src/common
+src/common/CMakeLists.txt
+src/common/global.cpp
+src/common/global.h
+src/common/logger.cpp
+src/common/logger.h
+src/common/main_core.cpp
+src/common/main_gui.cpp
+src/common/main_mono.cpp
+src/common/message.cpp
+src/common/message.h
+src/common/proxy_common.h
+src/common/settings.cpp
+src/common/settings.h
+src/common/util.cpp
+src/common/util.h
+src/core
+src/core/backlog.cpp
+src/core/backlog.h
+src/core/CMakeLists.txt
+src/core/core.cpp
+src/core/core.h
+src/core/coreproxy.cpp
+src/core/coreproxy.h
+src/core/server.cpp
+src/core/server.h
+src/core/sqlitestorage.cpp
+src/core/sqlitestorage.h
+src/core/storage.cpp
+src/core/storage.h
+src/plugins
+src/plugins/plugin.h
+src/qtgui
+src/qtgui/bufferview.cpp
+src/qtgui/bufferview.h
+src/qtgui/bufferviewwidget.cpp
+src/qtgui/bufferviewwidget.h
+src/qtgui/bufferwidget.cpp
+src/qtgui/bufferwidget.h
+src/qtgui/channelwidgetinput.cpp
+src/qtgui/channelwidgetinput.h
+src/qtgui/chatwidget.cpp
+src/qtgui/chatwidget.h
+src/qtgui/CMakeLists.txt
+src/qtgui/coreconnectdlg.cpp
+src/qtgui/coreconnectdlg.h
+src/qtgui/identities.cpp
+src/qtgui/identities.h
+src/qtgui/mainwin.cpp
+src/qtgui/mainwin.h
+src/qtgui/serverlist.cpp
+src/qtgui/serverlist.h
+src/qtgui/settingsdlg.cpp
+src/qtgui/settingsdlg.h
+src/qtgui/settingspages.cpp
+src/qtgui/settingspages.h
+src/qtgui/style.cpp
+src/qtgui/style.h
+src/qtgui/tabcompleter.cpp
+src/qtgui/tabcompleter.h
+src/qtgui/ui
+src/qtgui/ui/aboutdlg.ui
+src/qtgui/ui/buffermgmntsettingspage.ui
+src/qtgui/ui/bufferviewwidget.ui
+src/qtgui/ui/bufferwidget.ui
+src/qtgui/ui/channelwidget.ui
+src/qtgui/ui/connectionsettingspage.ui
+src/qtgui/ui/coreconnectdlg.ui
+src/qtgui/ui/coresettingspage.ui
+src/qtgui/ui/identitiesdlg.ui
+src/qtgui/ui/identitieseditdlg.ui
+src/qtgui/ui/ircwidget.ui
+src/qtgui/ui/mainwin.ui
+src/qtgui/ui/networkeditdlg.ui
+src/qtgui/ui/nickeditdlg.ui
+src/qtgui/ui/servereditdlg.ui
+src/qtgui/ui/serverlistdlg.ui
+src/qtgui/ui/settingsdlg.ui
+src/common/quasselui.h
+src/client/CMakeLists.txt
+src/qtgui/chatline.cpp
+src/qtgui/chatline.h
+src/client/buffertreemodel.h
+src/client/buffertreemodel.cpp
+src/client/treemodel.cpp
+src/client/treemodel.h
# Select if Quassel should be built in client, server or monolithic mode
SET(BUILD "mono" CACHE STRING "Defines which Quassel parts are to be built. Can contain 'core', 'gui' and/or 'monolithic' (which is the default), or 'all' to build everything.")
SET(BUILD_CORE )
-SET(BUILD_GUI )
+SET(BUILD_CLIENT )
SET(BUILD_MONO )
IF(BUILD MATCHES "core" OR BUILD MATCHES "all")
SET(BUILD_CORE true)
MESSAGE("Building Quassel core.")
ENDIF(BUILD MATCHES "core" OR BUILD MATCHES "all")
-IF(BUILD MATCHES "gui" OR BUILD MATCHES "all")
- SET(BUILD_GUI true)
+IF(BUILD MATCHES "client" OR BUILD MATCHES "all")
+ SET(BUILD_CLIENT true)
MESSAGE("Building Quassel GUI.")
-ENDIF(BUILD MATCHES "gui" OR BUILD MATCHES "all")
+ENDIF(BUILD MATCHES "client" OR BUILD MATCHES "all")
IF(BUILD MATCHES "mono" OR BUILD MATCHES "all")
SET(BUILD_MONO true)
MESSAGE("Building monolithic Quassel.")
MESSAGE(FATAL_ERROR "\nYou have not selected which parts of Quassel I should build. Aborting.\nRun 'cmake <path> -DBUILD=<part>', where <part> contains one or more of 'core', 'gui' or 'monolithic', or 'all' to build everything.\n")
ENDIF(NOT BUILD_MONO AND NOT BUILD_CORE AND NOT BUILD_GUI)
-IF(BUILD_CORE OR BUILD_GUI)
+IF(BUILD_CORE OR BUILD_CLIENT)
MESSAGE(FATAL_ERROR "\nBuilding of standalone core or GUI not supported at this time. Please check back later.\n")
-ENDIF(BUILD_CORE OR BUILD_GUI)
+ENDIF(BUILD_CORE OR BUILD_CLIENT)
SET(CMAKE_BUILD_TYPE Debug)
# Define files
SET(quassel_mono_SRCS common/main_mono.cpp)
SET(quassel_core_SRCS common/main_core.cpp)
-SET(quassel_gui_SRCS common/main_gui.cpp ${common_SRCS})
+SET(quassel_client_SRCS common/main_gui.cpp ${common_SRCS})
SET(quassel_RCCS images/icons.qrc)
-SET(quassel_DIRS common qtgui core)
+SET(quassel_DIRS common client core qtgui)
# Build correct absolute paths for subdirs to include
SET(SDIRS "")
FOREACH(dir ${quassel_DIRS})
SET(SDIRS ${SDIRS} "${CMAKE_CURRENT_SOURCE_DIR}/${dir}")
ENDFOREACH(dir)
-INCLUDE_DIRECTORIES(${SDIRS} client plugins)
-#INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR})
+INCLUDE_DIRECTORIES(${SDIRS} plugins)
+INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}/qtgui)
# We need Qt4 support.
SET(QT_MIN_VERSION "4.3.0") # 4.3 is required for SSL, crypto and some other stuff
IF(BUILD_CORE)
ADD_DEFINITIONS(-DBUILD_CORE)
ADD_EXECUTABLE(quasselcore ${quassel_core_SRCS} ${_RCCS})
- TARGET_LINK_LIBRARIES(quasselcore core common ${QT_LIBRARIES})
+ TARGET_LINK_LIBRARIES(quasselcore common core ${QT_LIBRARIES})
SET(TARGET_LIST ${TARGET_LIST} quasselcore)
+ REMOVE_DEFINITIONS(-DBUILD_CORE)
ENDIF(BUILD_CORE)
-IF(BUILD_GUI OR BUILD_MONO) # OK, now we need QtGui!
+IF(BUILD_CLIENT OR BUILD_MONO) # OK, now we need QtGui!
REMOVE_DEFINITIONS(-DQT_CORE_LIB -DQT_GUI_LIB ${QT_DEFINITIONS})
SET(QT_DONT_USE_QTGUI "")
SET(QT_INCLUDE_DIR "")
SET(QT_LIBRARIES "")
INCLUDE(${QT_USE_FILE})
+ ADD_SUBDIRECTORY(client)
ADD_SUBDIRECTORY(qtgui)
IF(BUILD_MONO)
ADD_DEFINITIONS(-DBUILD_MONO)
ADD_EXECUTABLE(quassel ${quassel_mono_SRCS} ${_RCCS})
- TARGET_LINK_LIBRARIES(quassel qtgui core common ${QT_LIBRARIES})
+ TARGET_LINK_LIBRARIES(quassel common client core qtgui ${QT_LIBRARIES})
SET(TARGET_LIST ${TARGET_LIST} quassel)
+ REMOVE_DEFINITIONS(-DBUILD_MONO)
ENDIF(BUILD_MONO)
- IF(BUILD_GUI)
- ADD_DEFINITIONS(-DBUILD_GUI)
+ IF(BUILD_CLIENT)
+ ADD_DEFINITIONS(-DBUILD_CLIENT)
ADD_EXECUTABLE(quasselgui ${quassel_gui_SRCS} ${_RCCS})
- TARGET_LINK_LIBRARIES(quasselgui qtgui common ${QT_LIBRARIES})
+ TARGET_LINK_LIBRARIES(quasselclient common client qtgui ${QT_LIBRARIES})
SET(TARGET_LIST ${TARGET_LIST} quasselgui)
- ENDIF(BUILD_GUI)
+ REMOVE_DEFINITIONS(-DBUILD_CLIENT)
+ ENDIF(BUILD_CLIENT)
-ENDIF(BUILD_GUI OR BUILD_MONO)
+ENDIF(BUILD_CLIENT OR BUILD_MONO)
INSTALL(TARGETS ${TARGET_LIST}
RUNTIME DESTINATION bin
--- /dev/null
+SET(client_SRCS buffer.cpp buffertreemodel.cpp client.cpp clientproxy.cpp treemodel.cpp)
+SET(client_HDRS )
+SET(client_MOCS buffer.h buffertreemodel.h client.h clientproxy.h treemodel.h)
+
+QT4_WRAP_CPP(_MOC ${client_MOCS})
+ADD_LIBRARY(client ${_MOC} ${client_SRCS} ${client_HDRS})
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+#include "client.h"
#include "buffer.h"
#include "util.h"
-#include "chatwidget.h"
-#include "bufferwidget.h"
/*
Buffer::Buffer(QString netname, QString bufname) {
emit bufferDestroyed(this);
}
-void Buffer::init() {
+Buffer::Type Buffer::bufferType() const {
+ return type;
+}
+bool Buffer::isActive() const {
+ return active;
+}
+QString Buffer::networkName() const {
+ return _networkName;
}
-QString Buffer::displayName() {
+QString Buffer::bufferName() const {
+ return _bufferName;
+}
+
+QString Buffer::displayName() const {
if(bufferType() == ServerBuffer)
- return tr("status");
+ return tr("Status Buffer");
else
return bufferName();
}
+BufferId Buffer::bufferId() const {
+ return id;
+}
+
+QList<AbstractUiMsg *> Buffer::contents() const {
+ return layoutedMsgs;
+}
+
+VarMap Buffer::nickList() const {
+ return nicks;
+}
+
+QString Buffer::topic() const {
+ return _topic;
+}
+
+QString Buffer::ownNick() const {
+ return _ownNick;
+}
+
+bool Buffer::isStatusBuffer() const {
+ return bufferType() == ServerBuffer;
+}
+
void Buffer::setActive(bool a) {
if(a != active) {
active = a;
}
}
-void Buffer::appendChatLine(ChatLine *line) {
- lines.append(line);
- emit chatLineAppended(line);
+void Buffer::appendMsg(const Message &msg) {
+ AbstractUiMsg *m = Client::layoutMsg(msg);
+ layoutedMsgs.append(m);
+ emit msgAppended(m);
+}
+
+void Buffer::prependMsg(const Message &msg) {
+ layoutQueue.append(msg);
}
-void Buffer::prependChatLine(ChatLine *line) {
- lines.prepend(line);
- emit chatLinePrepended(line);
+bool Buffer::layoutMsg() {
+ if(layoutQueue.count()) {
+ AbstractUiMsg *m = Client::layoutMsg(layoutQueue.takeFirst());
+ layoutedMsgs.prepend(m);
+ emit msgPrepended(m);
+ }
+ return layoutQueue.count();
}
void Buffer::processUserInput(QString msg) {
#define _BUFFER_H_
#include <QtCore>
-#include <QtGui>
-#include "chatwidget.h"
#include "global.h"
#include "message.h"
+#include "quasselui.h"
-class ChatWidget;
-class ChatLine;
-class ChatWidgetContents;
-class BufferWidget;
struct BufferState;
//!\brief Encapsulates the contents of a single channel, query or server status context.
Q_OBJECT
public:
- //Buffer(QString network, QString buffer);
Buffer(BufferId);
~Buffer();
- static void init();
enum Type { ServerBuffer, ChannelBuffer, QueryBuffer };
Highlight = 0x40
};
Q_DECLARE_FLAGS(ActivityLevel, Activity)
-
- Type bufferType() { return type; }
- bool isActive() { return active; }
-
- QString networkName() { return _networkName; }
- QString bufferName() { return _bufferName; }
- QString displayName();
- BufferId bufferId() { return id; }
- QList<ChatLine *> contents() { return lines; }
- VarMap nickList() { return nicks; }
- QString topic() { return _topic; }
- QString ownNick() { return _ownNick; }
- bool isStatusBuffer() { return bufferType() == ServerBuffer; }
+
+ Type bufferType() const;
+ bool isActive() const;
+
+ QString networkName() const;
+ QString bufferName() const;
+ QString displayName() const;
+ BufferId bufferId() const;
+ QList<AbstractUiMsg *> contents() const;
+ VarMap nickList() const;
+ QString topic() const;
+ QString ownNick() const;
+ bool isStatusBuffer() const;
signals:
- void userInput(BufferId, QString);
- //void msgDisplayed(Message);
- void chatLineAppended(ChatLine *);
- void chatLinePrepended(ChatLine *);
+ void userInput(const BufferId &, QString);
void nickListChanged(VarMap nicks);
void topicSet(QString topic);
void ownNickSet(QString ownNick);
void bufferUpdated(Buffer *);
void bufferDestroyed(Buffer *);
+ void msgAppended(AbstractUiMsg *);
+ void msgPrepended(AbstractUiMsg *);
+ void layoutQueueEmpty();
+
public slots:
void setActive(bool active = true);
- //void displayMsg(Message);
- //void prependMessages(QList<Message>); // for backlog
- void appendChatLine(ChatLine *);
- void prependChatLine(ChatLine *);
- //void prependChatLines(QList<ChatLine *>);
- //void recvStatusMsg(QString msg);
+ void appendMsg(const Message &);
+ void prependMsg(const Message &);
+ bool layoutMsg();
void setTopic(QString);
//void setNicks(QStringList);
void addNick(QString nick, VarMap props);
QString _networkName, _bufferName;
BufferState *state;
- //QList<Message> _contents;
- QList<ChatLine *> lines;
+ QList<Message> layoutQueue;
+ QList<AbstractUiMsg *> layoutedMsgs;
};
Q_DECLARE_OPERATORS_FOR_FLAGS(Buffer::ActivityLevel)
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+#include <QColor> // FIXME Dependency on QtGui!
+
#include "global.h"
#include "buffertreemodel.h"
#define _BUFFERTREEMODEL_H_
#include <QtCore>
+#include <QItemSelectionModel> // FIXME Dependency on QtGui
#include "treemodel.h"
#include "buffer.h"
#include "client.h"
#include "clientproxy.h"
-#include "mainwin.h"
#include "buffer.h"
+#include "buffertreemodel.h"
#include "util.h"
Client * Client::instanceptr = 0;
Client *Client::instance() {
if(instanceptr) return instanceptr;
instanceptr = new Client();
- instanceptr->init();
return instanceptr;
}
Client::Client() {
clientProxy = ClientProxy::instance();
- //mainWin = new MainWin();
- _bufferModel = new BufferTreeModel(0); // FIXME
+ _bufferModel = new BufferTreeModel(this);
connect(this, SIGNAL(bufferSelected(Buffer *)), _bufferModel, SLOT(selectBuffer(Buffer *)));
connect(this, SIGNAL(bufferUpdated(Buffer *)), _bufferModel, SLOT(bufferUpdated(Buffer *)));
else clientMode = RemoteCore;
}
+void Client::init(AbstractUi *ui) {
+ instance()->mainUi = ui;
+ instance()->init();
+}
+
void Client::init() {
blockSize = 0;
connect(clientProxy, SIGNAL(csServerState(QString, QVariant)), this, SLOT(recvNetworkState(QString, QVariant)));
connect(clientProxy, SIGNAL(csServerConnected(QString)), this, SLOT(networkConnected(QString)));
connect(clientProxy, SIGNAL(csServerDisconnected(QString)), this, SLOT(networkDisconnected(QString)));
- connect(clientProxy, SIGNAL(csDisplayMsg(Message)), this, SLOT(recvMessage(Message)));
+ connect(clientProxy, SIGNAL(csDisplayMsg(Message)), this, SLOT(recvMessage(const Message &)));
connect(clientProxy, SIGNAL(csDisplayStatusMsg(QString, QString)), this, SLOT(recvStatusMsg(QString, QString)));
connect(clientProxy, SIGNAL(csTopicSet(QString, QString, QString)), this, SLOT(setTopic(QString, QString, QString)));
connect(clientProxy, SIGNAL(csNickAdded(QString, QString, VarMap)), this, SLOT(addNick(QString, QString, VarMap)));
connect(clientProxy, SIGNAL(csNickRenamed(QString, QString, QString)), this, SLOT(renameNick(QString, QString, QString)));
connect(clientProxy, SIGNAL(csNickUpdated(QString, QString, VarMap)), this, SLOT(updateNick(QString, QString, VarMap)));
connect(clientProxy, SIGNAL(csOwnNickSet(QString, QString)), this, SLOT(setOwnNick(QString, QString)));
- connect(clientProxy, SIGNAL(csBacklogData(BufferId, QList<QVariant>, bool)), this, SLOT(recvBacklogData(BufferId, QList<QVariant>, bool)));
+ connect(clientProxy, SIGNAL(csBacklogData(BufferId, const QList<QVariant> &, bool)), this, SLOT(recvBacklogData(BufferId, QList<QVariant>, bool)));
connect(clientProxy, SIGNAL(csUpdateBufferId(BufferId)), this, SLOT(updateBufferId(BufferId)));
connect(this, SIGNAL(sendInput(BufferId, QString)), clientProxy, SLOT(gsUserInput(BufferId, QString)));
connect(this, SIGNAL(requestBacklog(BufferId, QVariant, QVariant)), clientProxy, SLOT(gsRequestBacklog(BufferId, QVariant, QVariant)));
buffer(id); // create all buffers, so we see them in the network views
emit requestBacklog(id, -1, -1); // TODO: use custom settings for backlog request
}
-
- mainWin = new MainWin();
- mainWin->init();
-
}
Client::~Client() {
- delete mainWin;
- delete _bufferModel;
+ //delete mainUi;
+ //delete _bufferModel;
foreach(Buffer *buf, buffers.values()) delete buf;
ClientProxy::destroy();
}
}
-/*******************************************************************************************************************/
-
void Client::networkConnected(QString net) {
connected[net] = true;
BufferId id = statusBufferId(net);
}
}
-void Client::recvMessage(Message msg) {
+void Client::recvMessage(const Message &msg) {
Buffer *b = buffer(msg.buffer);
Buffer::ActivityLevel level = Buffer::OtherActivity;
}
emit bufferActivity(level, b);
- //b->displayMsg(msg);
- b->appendChatLine(new ChatLine(msg));
+ b->appendMsg(msg);
}
void Client::recvStatusMsg(QString net, QString msg) {
}
-void Client::recvBacklogData(BufferId id, QList<QVariant> msgs, bool done) {
+void Client::recvBacklogData(BufferId id, const QList<QVariant> &msgs, bool done) {
+ Buffer *b = buffer(id);
foreach(QVariant v, msgs) {
- layoutQueue.append(v.value<Message>());
+ Message msg = v.value<Message>();
+ b->prependMsg(msg);
+ if(!layoutQueue.contains(b)) layoutQueue.append(b);
}
- if(!layoutTimer->isActive()) layoutTimer->start();
+ if(layoutQueue.count() && !layoutTimer->isActive()) layoutTimer->start();
}
-
void Client::layoutMsg() {
if(layoutQueue.count()) {
- ChatLine *line = new ChatLine(layoutQueue.takeFirst());
- buffer(line->bufferId())->prependChatLine(line);
+ Buffer *b = layoutQueue.takeFirst(); // TODO make this the current buffer
+ if(b->layoutMsg()) layoutQueue.append(b); // Buffer has more messages in its queue --> Round Robin
}
if(!layoutQueue.count()) layoutTimer->stop();
}
+AbstractUiMsg *Client::layoutMsg(const Message &msg) {
+ return instance()->mainUi->layoutMsg(msg);
+}
+
void Client::userInput(BufferId id, QString msg) {
emit sendInput(id, msg);
}
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
-#ifndef _GUI_H_
-#define _GUI_H_
+#ifndef _CLIENT_H_
+#define _CLIENT_H_
#include <QtCore>
-#include <QtGui>
#include <QtNetwork>
-#include "global.h"
+#include "quasselui.h"
#include "buffer.h"
#include "message.h"
-#include "clientproxy.h"
-#include "buffertreemodel.h"
-//#include "bufferviewwidget.h"
+#include "proxy_common.h"
-class MainWin;
class ClientProxy;
+class BufferTreeModel;
class Client : public QObject {
Q_OBJECT
public:
static Client *instance();
+ static void init(AbstractUi *);
static void destroy();
static Buffer *buffer(BufferId);
static BufferTreeModel *bufferModel();
+ static AbstractUiMsg *layoutMsg(const Message &);
+
signals:
void sendInput(BufferId, QString message);
void showBuffer(Buffer *);
void networkConnected(QString);
void networkDisconnected(QString);
void recvNetworkState(QString, QVariant);
- void recvMessage(Message message);
+ void recvMessage(const Message &message);
void recvStatusMsg(QString network, QString message);
void setTopic(QString net, QString buf, QString);
void addNick(QString net, QString nick, VarMap props);
void renameNick(QString net, QString oldnick, QString newnick);
void updateNick(QString net, QString nick, VarMap props);
void setOwnNick(QString net, QString nick);
- void recvBacklogData(BufferId, QList<QVariant>, bool);
+ void recvBacklogData(BufferId, const QList<QVariant> &, bool);
void updateBufferId(BufferId);
void layoutMsg();
enum ClientMode { LocalCore, RemoteCore };
static ClientMode clientMode;
- MainWin *mainWin;
+ AbstractUi *mainUi;
ClientProxy *clientProxy;
BufferTreeModel *_bufferModel;
static QList<BufferId> coreBuffers;
QTimer *layoutTimer;
- QList<Message> layoutQueue;
+ QList<Buffer *> layoutQueue;
};
#endif
SET(common_SRCS global.cpp logger.cpp util.cpp message.cpp settings.cpp)
-SET(common_HDRS util.h message.h settings.h)
+SET(common_HDRS util.h message.h settings.h quasselui.h)
SET(common_MOCS global.h logger.h)
QT4_WRAP_CPP(_MOC ${common_MOCS})
}
-QString BufferId::buffer() {
+QString BufferId::buffer() const {
if(isChannelName(buf)) return buf;
else return nickFromMask(buf);
}
BufferId() { id = gid = 0; } // FIXME
BufferId(uint uid, QString net, QString buf, uint gid = 0);
- inline uint uid() { return id; }
- inline uint groupId() { return gid; }
- inline QString network() { return net; }
- QString buffer(); // nickfrommask?
+ inline uint uid() const { return id; }
+ inline uint groupId() const { return gid; }
+ inline QString network() const { return net; }
+ QString buffer() const; // nickfrommask?
void setGroupId(uint _gid) { gid = _gid; }
inline bool operator==(const BufferId &other) const { return id == other.id; }
+
private:
uint id;
uint gid;
#include "coreproxy.h"
#include "settings.h"
#include "chatwidget.h"
+#include "mainwin.h"
int main(int argc, char **argv) {
QApplication app(argc, argv);
Settings::init();
Style::init();
- //MainWin *mainWin = new MainWin();
+ MainWin *mainWin = new MainWin();
//mainWin->show();
- //mainWin->init();
- Client::instance();
+ Client::init(mainWin);
+ mainWin->init();
int exitCode = app.exec();
//delete core;
Client::destroy();
Core::destroy();
+ delete mainWin;
//delete guiProxy;
//delete coreProxy;
//delete global;
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2005-07 by The Quassel IRC Development Team *
+ * devel@quassel-irc.org *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#ifndef _QUASSELUI_H_
+#define _QUASSELUI_H_
+
+#include "message.h"
+
+class AbstractUiMsg {
+
+ public:
+
+ virtual QString sender() const = 0;
+ virtual QString text() const = 0;
+ virtual MsgId msgId() const = 0;
+ virtual BufferId bufferId() const = 0;
+ virtual QDateTime timeStamp() const = 0;
+
+};
+
+
+class AbstractUi {
+
+ public:
+ virtual AbstractUiMsg *layoutMsg(const Message &) = 0;
+
+
+
+};
+
+
+
+#endif
-SET(qtgui_SRCS chatwidget.cpp channelwidgetinput.cpp tabcompleter.cpp mainwin.cpp serverlist.cpp bufferwidget.cpp
+SET(qtgui_SRCS chatwidget.cpp chatline.cpp channelwidgetinput.cpp tabcompleter.cpp mainwin.cpp serverlist.cpp bufferwidget.cpp
identities.cpp coreconnectdlg.cpp bufferview.cpp bufferviewwidget.cpp bufferviewfilter.cpp style.cpp settingsdlg.cpp settingspages.cpp)
SET(qtgui_HDRS style.h)
-SET(qtgui_MOCS chatwidget.h channelwidgetinput.h tabcompleter.h mainwin.h serverlist.h identities.h coreconnectdlg.h
+SET(qtgui_MOCS chatwidget.h chatline.h channelwidgetinput.h tabcompleter.h mainwin.h serverlist.h identities.h coreconnectdlg.h
bufferview.h bufferwidget.h bufferviewwidget.h bufferviewfilter.h settingsdlg.h settingspages.h)
SET(qtgui_UICS identitiesdlg.ui identitieseditdlg.ui networkeditdlg.ui mainwin.ui
nickeditdlg.ui serverlistdlg.ui servereditdlg.ui coreconnectdlg.ui ircwidget.ui
bufferviewwidget.ui bufferwidget.ui settingsdlg.ui
buffermgmntsettingspage.ui connectionsettingspage.ui)
-SET(client_SRCS ../client/client.cpp ../client/clientproxy.cpp ../client/buffer.cpp ../client/treemodel.cpp ../client/buffertreemodel.cpp)
-SET(client_MOCS ../client/client.h ../client/clientproxy.h ../client/buffer.h ../client/treemodel.h ../client/buffertreemodel.h)
-
# This prepends ui/ to the UIC names, so we don't have to do this ourselves.
FOREACH(ui ${qtgui_UICS})
SET(qtgui_UICS_UI ${qtgui_UICS_UI} "ui/${ui}")
ENDFOREACH(ui)
QT4_WRAP_UI(_UIC ${qtgui_UICS_UI})
-QT4_WRAP_CPP(_MOC ${qtgui_MOCS} ${client_MOCS})
+QT4_WRAP_CPP(_MOC ${qtgui_MOCS})
# We need to work around a dependency bug with out-of-source builds...
# Seems to be fixed!
#SET_SOURCE_FILES_PROPERTIES(${gui_SRCS} PROPERTIES OBJECT_DEPENDS "${_UIC}")
-INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR} client)
+INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR})
-ADD_LIBRARY(qtgui ${qtgui_HDRS} ${qtgui_SRCS} ${client_SRCS} ${_MOC} ${_UIC})
+ADD_LIBRARY(qtgui ${qtgui_HDRS} ${qtgui_SRCS} ${_MOC} ${_UIC})
#define _BUFFERVIEWFILTER_H_
#include <QFlags>
+#include <QSortFilterProxyModel>
#include "buffer.h"
#include "buffertreemodel.h"
#include "bufferwidget.h"
#include "buffer.h"
+#include "chatline.h"
#include "chatwidget.h"
#include "settings.h"
-#include "mainwin.h"
BufferWidget::BufferWidget(QWidget *parent) : QWidget(parent) {
ui.setupUi(this);
- //layoutThread->start();
- //connect(this, SIGNAL(aboutToClose()), layoutThread, SLOT(quit()));
- //connect(this, SIGNAL(layoutMessages(LayoutTask)), layoutThread, SLOT(processTask(LayoutTask)), Qt::QueuedConnection);
- //layoutThread->start();
-
curBuf = 0;
//setBaseSize(QSize(600,400));
//setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred);
}
void BufferWidget::init() {
- //layoutThread = new LayoutThread();
- //layoutThread = ::layoutThread;
- //connect(layoutThread, SIGNAL(taskProcessed(LayoutTask)), this, SLOT(messagesLayouted(LayoutTask)));
- //layoutThread->start();
- //while(!layoutThread->isRunning()) {};
+
}
BufferWidget::~BufferWidget() {
- //emit aboutToClose();
- //layoutThread->wait(10000);
- //delete layoutThread;
foreach(BufferState *s, states.values()) {
delete s;
}
states[buf] = s;
state = s;
state->chatWidget->init(networkName, bufferName);
- state->chatWidget->setContents(buf->contents());
- connect(buf, SIGNAL(chatLineAppended(ChatLine *)), state->chatWidget, SLOT(appendChatLine(ChatLine *)));
- connect(buf, SIGNAL(chatLinePrepended(ChatLine *)), state->chatWidget, SLOT(prependChatLine(ChatLine *)));
+ QList<ChatLine *> lines;
+ QList<AbstractUiMsg *> msgs = buf->contents();
+ foreach(AbstractUiMsg *msg, msgs) {
+ lines.append(dynamic_cast<ChatLine*>(msg));
+ }
+ state->chatWidget->setContents(lines);
+ connect(buf, SIGNAL(msgAppended(AbstractUiMsg *)), state->chatWidget, SLOT(appendMsg(AbstractUiMsg *)));
+ connect(buf, SIGNAL(msgPrepended(AbstractUiMsg *)), state->chatWidget, SLOT(prependMsg(AbstractUiMsg *)));
connect(buf, SIGNAL(topicSet(QString)), this, SLOT(setTopic(QString)));
connect(buf, SIGNAL(ownNickSet(QString)), this, SLOT(setOwnNick(QString)));
ui.stackedWidget->addWidget(s->page);
updateTitle();
}
-/*
-void BufferWidget::prependMessages(Buffer *buf, QList<Message> messages) {
- LayoutTask task;
- task.messages = messages;
- task.buffer = buf;
- task.net = buf->networkName();
- task.buf = buf->bufferName();
- //emit layoutMessages(task);
- layoutThread->processTask(task);
-}
-
-void BufferWidget::messagesLayouted(LayoutTask task) {
- if(states.contains(task.buffer)) {
- states[task.buffer]->chatWidget->prependChatLines(task.lines);
- task.buffer->prependMessages(task.messages);
- } else {
- msgCache[task.buffer] = task.messages + msgCache[task.buffer];
- chatLineCache[task.buffer] = task.lines + chatLineCache[task.buffer];
- }
-}
-*/
-
void BufferWidget::saveState() {
foreach(Buffer *buf, states.keys()) {
BufferState *s = states[buf];
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2005-07 by The Quassel IRC Development Team *
+ * devel@quassel-irc.org *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#include "chatline.h"
+
+//!\brief Construct a ChatLine object from a message.
+/**
+ * \param m The message to be layouted and rendered
+ * \param net The network name
+ * \param buf The buffer name
+ */
+ChatLine::ChatLine(Message m) {
+ hght = 0;
+ //networkName = m.buffer.network();
+ //bufferName = m.buffer.buffer();
+ msg = m;
+ selectionMode = None;
+ formatMsg(msg);
+}
+
+ChatLine::~ChatLine() {
+
+}
+
+void ChatLine::formatMsg(Message msg) {
+ QString user = userFromMask(msg.sender);
+ QString host = hostFromMask(msg.sender);
+ QString nick = nickFromMask(msg.sender);
+ QString text = Style::mircToInternal(msg.text);
+ QString networkName = msg.buffer.network();
+ QString bufferName = msg.buffer.buffer();
+
+ QString c = tr("%DT[%1]").arg(msg.timeStamp.toLocalTime().toString("hh:mm:ss"));
+ QString s, t;
+ switch(msg.type) {
+ case Message::Plain:
+ s = tr("%DS<%1>").arg(nick); t = tr("%D0%1").arg(text); break;
+ case Message::Server:
+ s = tr("%Ds*"); t = tr("%Ds%1").arg(text); break;
+ case Message::Error:
+ s = tr("%De*"); t = tr("%De%1").arg(text); break;
+ case Message::Join:
+ s = tr("%Dj-->"); t = tr("%Dj%DN%DU%1%DU%DN %DH(%2@%3)%DH has joined %DC%DU%4%DU%DC").arg(nick, user, host, bufferName); break;
+ case Message::Part:
+ s = tr("%Dp<--"); t = tr("%Dp%DN%DU%1%DU%DN %DH(%2@%3)%DH has left %DC%DU%4%DU%DC").arg(nick, user, host, bufferName);
+ if(!text.isEmpty()) t = QString("%1 (%2)").arg(t).arg(text);
+ break;
+ case Message::Quit:
+ s = tr("%Dq<--"); t = tr("%Dq%DN%DU%1%DU%DN %DH(%2@%3)%DH has quit").arg(nick, user, host);
+ if(!text.isEmpty()) t = QString("%1 (%2)").arg(t).arg(text);
+ break;
+ case Message::Kick:
+ { s = tr("%Dk<-*");
+ QString victim = text.section(" ", 0, 0);
+ //if(victim == ui.ownNick->currentText()) victim = tr("you");
+ QString kickmsg = text.section(" ", 1);
+ t = tr("%Dk%DN%DU%1%DU%DN has kicked %DN%DU%2%DU%DN from %DC%DU%3%DU%DC").arg(nick).arg(victim).arg(bufferName);
+ if(!kickmsg.isEmpty()) t = QString("%1 (%2)").arg(t).arg(kickmsg);
+ }
+ break;
+ case Message::Nick:
+ s = tr("%Dr<->");
+ if(nick == msg.text) t = tr("%DrYou are now known as %DN%1%DN").arg(msg.text);
+ else t = tr("%Dr%DN%1%DN is now known as %DN%DU%2%DU%DN").arg(nick, msg.text);
+ break;
+ case Message::Mode:
+ s = tr("%Dm***");
+ if(nick.isEmpty()) t = tr("%DmUser mode: %DM%1%DM").arg(msg.text);
+ else t = tr("%DmMode %DM%1%DM by %DN%DU%2%DU%DN").arg(msg.text, nick);
+ break;
+ case Message::Action:
+ s = tr("%Da-*-");
+ t = tr("%Da%DN%DU%1%DU%DN %2").arg(nick).arg(msg.text);
+ break;
+ default:
+ s = tr("%De%1").arg(msg.sender);
+ t = tr("%De[%1]").arg(msg.text);
+ }
+ QTextOption tsOption, senderOption, textOption;
+ tsFormatted = Style::internalToFormatted(c);
+ senderFormatted = Style::internalToFormatted(s);
+ textFormatted = Style::internalToFormatted(t);
+ precomputeLine();
+}
+
+QList<ChatLine::FormatRange> ChatLine::calcFormatRanges(const Style::FormattedString &fs, QTextLayout::FormatRange additional) {
+ QList<FormatRange> ranges;
+ QList<QTextLayout::FormatRange> formats = fs.formats;
+ formats.append(additional);
+ int cur = -1;
+ FormatRange range, lastrange;
+ for(int i = 0; i < fs.text.length(); i++) {
+ QTextCharFormat format;
+ foreach(QTextLayout::FormatRange f, formats) {
+ if(i >= f.start && i < f.start + f.length) format.merge(f.format);
+ }
+ if(cur < 0) {
+ range.start = 0; range.length = 1; range.format= format;
+ cur = 0;
+ } else {
+ if(format == range.format) range.length++;
+ else {
+ QFontMetrics metrics(range.format.font());
+ range.height = metrics.lineSpacing();
+ ranges.append(range);
+ range.start = i; range.length = 1; range.format = format;
+ cur++;
+ }
+ }
+ }
+ if(cur >= 0) {
+ QFontMetrics metrics(range.format.font());
+ range.height = metrics.lineSpacing();
+ ranges.append(range);
+ }
+ return ranges;
+}
+
+void ChatLine::setSelection(SelectionMode mode, int start, int end) {
+ selectionMode = mode;
+ //tsFormat.clear(); senderFormat.clear(); textFormat.clear();
+ QPalette pal = QApplication::palette();
+ QTextLayout::FormatRange tsSel, senderSel, textSel;
+ switch (mode) {
+ case None:
+ tsFormat = calcFormatRanges(tsFormatted);
+ senderFormat = calcFormatRanges(senderFormatted);
+ textFormat = calcFormatRanges(textFormatted);
+ break;
+ case Partial:
+ selectionStart = qMin(start, end); selectionEnd = qMax(start, end);
+ textSel.format.setForeground(pal.brush(QPalette::HighlightedText));
+ textSel.format.setBackground(pal.brush(QPalette::Highlight));
+ textSel.start = selectionStart;
+ textSel.length = selectionEnd - selectionStart;
+ //textFormat.append(textSel);
+ textFormat = calcFormatRanges(textFormatted, textSel);
+ foreach(FormatRange fr, textFormat);
+ break;
+ case Full:
+ tsSel.format.setForeground(pal.brush(QPalette::HighlightedText));
+ tsSel.format.setBackground(pal.brush(QPalette::Highlight));
+ tsSel.start = 0; tsSel.length = tsFormatted.text.length();
+ tsFormat = calcFormatRanges(tsFormatted, tsSel);
+ senderSel.format.setForeground(pal.brush(QPalette::HighlightedText));
+ senderSel.format.setBackground(pal.brush(QPalette::Highlight));
+ senderSel.start = 0; senderSel.length = senderFormatted.text.length();
+ senderFormat = calcFormatRanges(senderFormatted, senderSel);
+ textSel.format.setForeground(pal.brush(QPalette::HighlightedText));
+ textSel.format.setBackground(pal.brush(QPalette::Highlight));
+ textSel.start = 0; textSel.length = textFormatted.text.length();
+ textFormat = calcFormatRanges(textFormatted, textSel);
+ break;
+ }
+}
+
+uint ChatLine::msgId() const {
+ return msg.buffer.uid();
+}
+
+BufferId ChatLine::bufferId() const {
+ return msg.buffer;
+}
+
+QDateTime ChatLine::timeStamp() const {
+ return msg.timeStamp;
+}
+
+QString ChatLine::sender() const {
+ return senderFormatted.text;
+}
+
+QString ChatLine::text() const {
+ return textFormatted.text;
+}
+
+bool ChatLine::isUrl(int c) const {
+ if(c < 0 || c >= charUrlIdx.count()) return false;;
+ return charUrlIdx[c] >= 0;
+}
+
+QUrl ChatLine::getUrl(int c) const {
+ if(c < 0 || c >= charUrlIdx.count()) return QUrl();
+ int i = charUrlIdx[c];
+ if(i >= 0) return textFormatted.urls[i].url;
+ else return QUrl();
+}
+
+//!\brief Return the cursor position for the given coordinate pos.
+/**
+ * \param pos The position relative to the ChatLine
+ * \return The cursor position, [or -3 for invalid,] or -2 for timestamp, or -1 for sender
+ */
+int ChatLine::posToCursor(QPointF pos) {
+ if(pos.x() < tsWidth + (int)Style::sepTsSender()/2) return -2;
+ qreal textStart = tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText();
+ if(pos.x() < textStart) return -1;
+ int x = (int)(pos.x() - textStart);
+ for(int l = lineLayouts.count() - 1; l >=0; l--) {
+ LineLayout line = lineLayouts[l];
+ if(pos.y() >= line.y) {
+ int offset = charPos[line.start]; x += offset;
+ for(int i = line.start + line.length - 1; i >= line.start; i--) {
+ if((charPos[i] + charPos[i+1])/2 <= x) return i+1; // FIXME: Optimize this!
+ }
+ return line.start;
+ }
+ }
+}
+
+void ChatLine::precomputeLine() {
+ tsFormat = calcFormatRanges(tsFormatted);
+ senderFormat = calcFormatRanges(senderFormatted);
+ textFormat = calcFormatRanges(textFormatted);
+
+ minHeight = 0;
+ foreach(FormatRange fr, tsFormat) minHeight = qMax(minHeight, fr.height);
+ foreach(FormatRange fr, senderFormat) minHeight = qMax(minHeight, fr.height);
+
+ words.clear();
+ charPos.resize(textFormatted.text.length() + 1);
+ charHeights.resize(textFormatted.text.length());
+ charUrlIdx.fill(-1, textFormatted.text.length());
+ for(int i = 0; i < textFormatted.urls.count(); i++) {
+ Style::UrlInfo url = textFormatted.urls[i];
+ for(int j = url.start; j < url.end; j++) charUrlIdx[j] = i;
+ }
+ if(!textFormat.count()) return;
+ int idx = 0; int cnt = 0; int w = 0; int h = 0;
+ QFontMetrics metrics(textFormat[0].format.font());
+ Word wr;
+ wr.start = -1; wr.trailing = -1;
+ for(int i = 0; i < textFormatted.text.length(); ) {
+ charPos[i] = w; charHeights[i] = textFormat[idx].height;
+ w += metrics.charWidth(textFormatted.text, i);
+ if(!textFormatted.text[i].isSpace()) {
+ if(wr.trailing >= 0) {
+ // new word after space
+ words.append(wr);
+ wr.start = -1;
+ }
+ if(wr.start < 0) {
+ wr.start = i; wr.length = 1; wr.trailing = -1; wr.height = textFormat[idx].height;
+ } else {
+ wr.length++; wr.height = qMax(wr.height, textFormat[idx].height);
+ }
+ } else {
+ if(wr.start < 0) {
+ wr.start = i; wr.length = 0; wr.trailing = 1; wr.height = 0;
+ } else {
+ wr.trailing++;
+ }
+ }
+ if(++i < textFormatted.text.length() && ++cnt >= textFormat[idx].length) {
+ cnt = 0; idx++;
+ Q_ASSERT(idx < textFormat.count());
+ metrics = QFontMetrics(textFormat[idx].format.font());
+ }
+ }
+ charPos[textFormatted.text.length()] = w;
+ if(wr.start >= 0) words.append(wr);
+}
+
+qreal ChatLine::layout(qreal tsw, qreal senderw, qreal textw) {
+ tsWidth = tsw; senderWidth = senderw; textWidth = textw;
+ if(textw <= 0) return minHeight;
+ lineLayouts.clear(); LineLayout line;
+ int h = 0;
+ int offset = 0; int numWords = 0;
+ line.y = 0;
+ line.start = 0;
+ line.height = minHeight; // first line needs room for ts and sender
+ for(int i = 0; i < words.count(); i++) {
+ int lastpos = charPos[words[i].start + words[i].length]; // We use charPos[lastchar + 1], 'coz last char needs to fit
+ if(lastpos - offset <= textw) {
+ line.height = qMax(line.height, words[i].height);
+ line.length = words[i].start + words[i].length - line.start;
+ numWords++;
+ } else {
+ // we need to wrap!
+ if(numWords > 0) {
+ // ok, we had some words before, so store the layout and start a new line
+ h += line.height;
+ line.length = words[i-1].start + words[i-1].length - line.start;
+ lineLayouts.append(line);
+ line.y += line.height;
+ line.start = words[i].start;
+ line.height = words[i].height;
+ offset = charPos[words[i].start];
+ }
+ numWords = 1;
+ // check if the word fits into the current line
+ if(lastpos - offset <= textw) {
+ line.length = words[i].length;
+ } else {
+ // we need to break a word in the middle
+ int border = (int)textw + offset; // save some additions
+ line.start = words[i].start;
+ line.length = 1;
+ line.height = charHeights[line.start];
+ int j = line.start + 1;
+ for(int l = 1; l < words[i].length; j++, l++) {
+ if(charPos[j+1] < border) {
+ line.length++;
+ line.height = qMax(line.height, charHeights[j]);
+ continue;
+ } else {
+ h += line.height;
+ lineLayouts.append(line);
+ line.y += line.height;
+ line.start = j;
+ line.height = charHeights[j];
+ line.length = 1;
+ offset = charPos[j];
+ border = (int)textw + offset;
+ }
+ }
+ }
+ }
+ }
+ h += line.height;
+ if(numWords > 0) {
+ lineLayouts.append(line);
+ }
+ hght = h;
+ return hght;
+}
+
+//!\brief Draw ChatLine on the given QPainter at the given position.
+void ChatLine::draw(QPainter *p, const QPointF &pos) {
+ QPalette pal = QApplication::palette();
+
+ if(selectionMode == Full) {
+ p->setPen(Qt::NoPen);
+ p->setBrush(pal.brush(QPalette::Highlight));
+ p->drawRect(QRectF(pos, QSizeF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText() + textWidth, height())));
+ } else if(selectionMode == Partial) {
+
+ } /*
+ p->setClipRect(QRectF(pos, QSizeF(tsWidth, height())));
+ tsLayout.draw(p, pos, tsFormat);
+ p->setClipRect(QRectF(pos + QPointF(tsWidth + Style::sepTsSender(), 0), QSizeF(senderWidth, height())));
+ senderLayout.draw(p, pos + QPointF(tsWidth + Style::sepTsSender(), 0), senderFormat);
+ p->setClipping(false);
+ textLayout.draw(p, pos + QPointF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText(), 0), textFormat);
+ */
+ //p->setClipRect(QRectF(pos, QSizeF(tsWidth, 15)));
+ //p->drawRect(QRectF(pos, QSizeF(tsWidth, minHeight)));
+ p->setBackgroundMode(Qt::OpaqueMode);
+ QPointF tp = pos;
+ QRectF rect(pos, QSizeF(tsWidth, minHeight));
+ QRectF brect;
+ foreach(FormatRange fr, tsFormat) {
+ p->setFont(fr.format.font());
+ p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
+ p->drawText(rect, Qt::AlignLeft|Qt::TextSingleLine, tsFormatted.text.mid(fr.start, fr.length), &brect);
+ rect.setLeft(brect.right());
+ }
+ rect = QRectF(pos + QPointF(tsWidth + Style::sepTsSender(), 0), QSizeF(senderWidth, minHeight));
+ for(int i = senderFormat.count() - 1; i >= 0; i--) {
+ FormatRange fr = senderFormat[i];
+ p->setFont(fr.format.font()); p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
+ p->drawText(rect, Qt::AlignRight|Qt::TextSingleLine, senderFormatted.text.mid(fr.start, fr.length), &brect);
+ rect.setRight(brect.left());
+ }
+ QPointF tpos = pos + QPointF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText(), 0);
+ qreal h = 0; int l = 0;
+ rect = QRectF(tpos + QPointF(0, h), QSizeF(textWidth, lineLayouts[l].height));
+ int offset = 0;
+ foreach(FormatRange fr, textFormat) {
+ if(l >= lineLayouts.count()) break;
+ p->setFont(fr.format.font()); p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
+ int start, end, frend, llend;
+ do {
+ frend = fr.start + fr.length;
+ if(frend <= lineLayouts[l].start) break;
+ llend = lineLayouts[l].start + lineLayouts[l].length;
+ start = qMax(fr.start, lineLayouts[l].start); end = qMin(frend, llend);
+ rect.setLeft(tpos.x() + charPos[start] - offset);
+ p->drawText(rect, Qt::AlignLeft|Qt::TextSingleLine, textFormatted.text.mid(start, end - start), &brect);
+ if(llend <= end) {
+ h += lineLayouts[l].height;
+ l++;
+ if(l < lineLayouts.count()) {
+ rect = QRectF(tpos + QPointF(0, h), QSizeF(textWidth, lineLayouts[l].height));
+ offset = charPos[lineLayouts[l].start];
+ }
+ }
+ } while(end < frend && l < lineLayouts.count());
+ }
+}
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2005-07 by The Quassel IRC Development Team *
+ * devel@quassel-irc.org *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#ifndef _CHATLINE_H_
+#define _CHATLINE_H_
+
+#include <QtGui>
+
+#include "util.h"
+#include "style.h"
+#include "quasselui.h"
+
+//FIXME: chatline doku
+//!\brief Containing the layout and providing the rendering of a single message.
+/** A ChatLine takes a Message object,
+ * formats it (by turning the various message types into a human-readable form and afterwards pumping it through
+ * our Style engine), and stores it as a number of QTextLayouts representing the three fields of a chat line
+ * (timestamp, sender and text). These layouts already include any rendering information such as font,
+ * color, or selected characters. By calling layout(), they can be quickly layouted to fit a given set of field widths.
+ * Afterwards, they can quickly be painted whenever necessary.
+ *
+ * By separating the complex and slow task of interpreting and formatting Message objects (which happens exactly once
+ * per message) from the actual layouting and painting, we gain a lot of speed compared to the standard Qt rendering
+ * functions.
+ */
+class ChatLine : public QObject, public AbstractUiMsg {
+ Q_OBJECT
+
+ public:
+ ChatLine(Message message);
+ virtual ~ChatLine();
+
+ qreal layout(qreal tsWidth, qreal nickWidth, qreal textWidth);
+ qreal height() const { return hght; }
+ int posToCursor(QPointF pos);
+ void draw(QPainter *p, const QPointF &pos);
+
+ enum SelectionMode { None, Partial, Full };
+ void setSelection(SelectionMode, int start = 0, int end = 0);
+
+ QDateTime timeStamp() const;
+ QString sender() const;
+ QString text() const;
+ MsgId msgId() const;
+ BufferId bufferId() const;
+
+ bool isUrl(int pos) const;
+ QUrl getUrl(int pos) const;
+
+ public slots:
+
+ private:
+ qreal hght;
+ Message msg;
+ qreal tsWidth, senderWidth, textWidth;
+ Style::FormattedString tsFormatted, senderFormatted, textFormatted;
+
+ struct FormatRange {
+ int start;
+ int length;
+ int height;
+ QTextCharFormat format;
+ };
+ struct Word {
+ int start;
+ int length;
+ int trailing;
+ int height;
+ };
+ struct LineLayout {
+ int y;
+ int height;
+ int start;
+ int length;
+ };
+ QVector<int> charPos;
+ QVector<int> charWidths;
+ QVector<int> charHeights;
+ QVector<int> charUrlIdx;
+ QList<FormatRange> tsFormat, senderFormat, textFormat;
+ QList<Word> words;
+ QList<LineLayout> lineLayouts;
+ int minHeight;
+
+ SelectionMode selectionMode;
+ int selectionStart, selectionEnd;
+ void formatMsg(Message);
+ void precomputeLine();
+ QList<FormatRange> calcFormatRanges(const Style::FormattedString &, QTextLayout::FormatRange additional = QTextLayout::FormatRange());
+};
+
+#endif
#include "util.h"
#include "style.h"
#include "chatwidget.h"
-#include <QtGui>
-#include <QtCore>
+#include "chatline.h"
+
ChatWidget::ChatWidget(QWidget *parent) : QAbstractScrollArea(parent) {
scrollTimer = new QTimer(this);
//contents->clear();
}
+void ChatWidget::prependMsg(AbstractUiMsg *msg) {
+ ChatLine *line = dynamic_cast<ChatLine*>(msg);
+ Q_ASSERT(line);
+ prependChatLine(line);
+}
+
void ChatWidget::prependChatLine(ChatLine *line) {
qreal h = line->layout(tsWidth, senderWidth, textWidth);
for(int i = 1; i < ycoords.count(); i++) ycoords[i] += h;
viewport()->update();
}
+void ChatWidget::appendMsg(AbstractUiMsg *msg) {
+ ChatLine *line = dynamic_cast<ChatLine*>(msg);
+ Q_ASSERT(line);
+ appendChatLine(line);
+}
void ChatWidget::appendChatLine(ChatLine *line) {
qreal h = line->layout(tsWidth, senderWidth, textWidth);
viewport()->update();
}
+
void ChatWidget::appendChatLines(QList<ChatLine *> list) {
foreach(ChatLine *line, list) {
qreal h = line->layout(tsWidth, senderWidth, textWidth);
/************************************************************************************/
-//!\brief Construct a ChatLine object from a message.
-/**
- * \param m The message to be layouted and rendered
- * \param net The network name
- * \param buf The buffer name
- */
-ChatLine::ChatLine(Message m) : QObject() {
- hght = 0;
- //networkName = m.buffer.network();
- //bufferName = m.buffer.buffer();
- msg = m;
- selectionMode = None;
- formatMsg(msg);
-}
-
-ChatLine::~ChatLine() {
-
-}
-
-void ChatLine::formatMsg(Message msg) {
- QString user = userFromMask(msg.sender);
- QString host = hostFromMask(msg.sender);
- QString nick = nickFromMask(msg.sender);
- QString text = Style::mircToInternal(msg.text);
- QString networkName = msg.buffer.network();
- QString bufferName = msg.buffer.buffer();
-
- QString c = tr("%DT[%1]").arg(msg.timeStamp.toLocalTime().toString("hh:mm:ss"));
- QString s, t;
- switch(msg.type) {
- case Message::Plain:
- s = tr("%DS<%1>").arg(nick); t = tr("%D0%1").arg(text); break;
- case Message::Server:
- s = tr("%Ds*"); t = tr("%Ds%1").arg(text); break;
- case Message::Error:
- s = tr("%De*"); t = tr("%De%1").arg(text); break;
- case Message::Join:
- s = tr("%Dj-->"); t = tr("%Dj%DN%DU%1%DU%DN %DH(%2@%3)%DH has joined %DC%DU%4%DU%DC").arg(nick, user, host, bufferName); break;
- case Message::Part:
- s = tr("%Dp<--"); t = tr("%Dp%DN%DU%1%DU%DN %DH(%2@%3)%DH has left %DC%DU%4%DU%DC").arg(nick, user, host, bufferName);
- if(!text.isEmpty()) t = QString("%1 (%2)").arg(t).arg(text);
- break;
- case Message::Quit:
- s = tr("%Dq<--"); t = tr("%Dq%DN%DU%1%DU%DN %DH(%2@%3)%DH has quit").arg(nick, user, host);
- if(!text.isEmpty()) t = QString("%1 (%2)").arg(t).arg(text);
- break;
- case Message::Kick:
- { s = tr("%Dk<-*");
- QString victim = text.section(" ", 0, 0);
- //if(victim == ui.ownNick->currentText()) victim = tr("you");
- QString kickmsg = text.section(" ", 1);
- t = tr("%Dk%DN%DU%1%DU%DN has kicked %DN%DU%2%DU%DN from %DC%DU%3%DU%DC").arg(nick).arg(victim).arg(bufferName);
- if(!kickmsg.isEmpty()) t = QString("%1 (%2)").arg(t).arg(kickmsg);
- }
- break;
- case Message::Nick:
- s = tr("%Dr<->");
- if(nick == msg.text) t = tr("%DrYou are now known as %DN%1%DN").arg(msg.text);
- else t = tr("%Dr%DN%1%DN is now known as %DN%DU%2%DU%DN").arg(nick, msg.text);
- break;
- case Message::Mode:
- s = tr("%Dm***");
- if(nick.isEmpty()) t = tr("%DmUser mode: %DM%1%DM").arg(msg.text);
- else t = tr("%DmMode %DM%1%DM by %DN%DU%2%DU%DN").arg(msg.text, nick);
- break;
- case Message::Action:
- s = tr("%Da-*-");
- t = tr("%Da%DN%DU%1%DU%DN %2").arg(nick).arg(msg.text);
- break;
- default:
- s = tr("%De%1").arg(msg.sender);
- t = tr("%De[%1]").arg(msg.text);
- }
- QTextOption tsOption, senderOption, textOption;
- tsFormatted = Style::internalToFormatted(c);
- senderFormatted = Style::internalToFormatted(s);
- textFormatted = Style::internalToFormatted(t);
- precomputeLine();
-}
-
-QList<ChatLine::FormatRange> ChatLine::calcFormatRanges(const Style::FormattedString &fs, QTextLayout::FormatRange additional) {
- QList<FormatRange> ranges;
- QList<QTextLayout::FormatRange> formats = fs.formats;
- formats.append(additional);
- int cur = -1;
- FormatRange range, lastrange;
- for(int i = 0; i < fs.text.length(); i++) {
- QTextCharFormat format;
- foreach(QTextLayout::FormatRange f, formats) {
- if(i >= f.start && i < f.start + f.length) format.merge(f.format);
- }
- if(cur < 0) {
- range.start = 0; range.length = 1; range.format= format;
- cur = 0;
- } else {
- if(format == range.format) range.length++;
- else {
- QFontMetrics metrics(range.format.font());
- range.height = metrics.lineSpacing();
- ranges.append(range);
- range.start = i; range.length = 1; range.format = format;
- cur++;
- }
- }
- }
- if(cur >= 0) {
- QFontMetrics metrics(range.format.font());
- range.height = metrics.lineSpacing();
- ranges.append(range);
- }
- return ranges;
-}
-
-void ChatLine::setSelection(SelectionMode mode, int start, int end) {
- selectionMode = mode;
- //tsFormat.clear(); senderFormat.clear(); textFormat.clear();
- QPalette pal = QApplication::palette();
- QTextLayout::FormatRange tsSel, senderSel, textSel;
- switch (mode) {
- case None:
- tsFormat = calcFormatRanges(tsFormatted);
- senderFormat = calcFormatRanges(senderFormatted);
- textFormat = calcFormatRanges(textFormatted);
- break;
- case Partial:
- selectionStart = qMin(start, end); selectionEnd = qMax(start, end);
- textSel.format.setForeground(pal.brush(QPalette::HighlightedText));
- textSel.format.setBackground(pal.brush(QPalette::Highlight));
- textSel.start = selectionStart;
- textSel.length = selectionEnd - selectionStart;
- //textFormat.append(textSel);
- textFormat = calcFormatRanges(textFormatted, textSel);
- foreach(FormatRange fr, textFormat);
- break;
- case Full:
- tsSel.format.setForeground(pal.brush(QPalette::HighlightedText));
- tsSel.format.setBackground(pal.brush(QPalette::Highlight));
- tsSel.start = 0; tsSel.length = tsFormatted.text.length();
- tsFormat = calcFormatRanges(tsFormatted, tsSel);
- senderSel.format.setForeground(pal.brush(QPalette::HighlightedText));
- senderSel.format.setBackground(pal.brush(QPalette::Highlight));
- senderSel.start = 0; senderSel.length = senderFormatted.text.length();
- senderFormat = calcFormatRanges(senderFormatted, senderSel);
- textSel.format.setForeground(pal.brush(QPalette::HighlightedText));
- textSel.format.setBackground(pal.brush(QPalette::Highlight));
- textSel.start = 0; textSel.length = textFormatted.text.length();
- textFormat = calcFormatRanges(textFormatted, textSel);
- break;
- }
-}
-
-uint ChatLine::msgId() {
- return msg.buffer.uid();
-}
-
-BufferId ChatLine::bufferId() {
- return msg.buffer;
-}
-
-QDateTime ChatLine::timeStamp() {
- return msg.timeStamp;
-}
-
-QString ChatLine::sender() {
- return senderFormatted.text;
-}
-
-QString ChatLine::text() {
- return textFormatted.text;
-}
-
-bool ChatLine::isUrl(int c) {
- if(c < 0 || c >= charUrlIdx.count()) return false;;
- return charUrlIdx[c] >= 0;
-}
-
-QUrl ChatLine::getUrl(int c) {
- if(c < 0 || c >= charUrlIdx.count()) return QUrl();
- int i = charUrlIdx[c];
- if(i >= 0) return textFormatted.urls[i].url;
- else return QUrl();
-}
-
-//!\brief Return the cursor position for the given coordinate pos.
-/**
- * \param pos The position relative to the ChatLine
- * \return The cursor position, [or -3 for invalid,] or -2 for timestamp, or -1 for sender
- */
-int ChatLine::posToCursor(QPointF pos) {
- if(pos.x() < tsWidth + (int)Style::sepTsSender()/2) return -2;
- qreal textStart = tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText();
- if(pos.x() < textStart) return -1;
- int x = (int)(pos.x() - textStart);
- for(int l = lineLayouts.count() - 1; l >=0; l--) {
- LineLayout line = lineLayouts[l];
- if(pos.y() >= line.y) {
- int offset = charPos[line.start]; x += offset;
- for(int i = line.start + line.length - 1; i >= line.start; i--) {
- if((charPos[i] + charPos[i+1])/2 <= x) return i+1; // FIXME: Optimize this!
- }
- return line.start;
- }
- }
-}
-
-void ChatLine::precomputeLine() {
- tsFormat = calcFormatRanges(tsFormatted);
- senderFormat = calcFormatRanges(senderFormatted);
- textFormat = calcFormatRanges(textFormatted);
-
- minHeight = 0;
- foreach(FormatRange fr, tsFormat) minHeight = qMax(minHeight, fr.height);
- foreach(FormatRange fr, senderFormat) minHeight = qMax(minHeight, fr.height);
-
- words.clear();
- charPos.resize(textFormatted.text.length() + 1);
- charHeights.resize(textFormatted.text.length());
- charUrlIdx.fill(-1, textFormatted.text.length());
- for(int i = 0; i < textFormatted.urls.count(); i++) {
- Style::UrlInfo url = textFormatted.urls[i];
- for(int j = url.start; j < url.end; j++) charUrlIdx[j] = i;
- }
- if(!textFormat.count()) return;
- int idx = 0; int cnt = 0; int w = 0; int h = 0;
- QFontMetrics metrics(textFormat[0].format.font());
- Word wr;
- wr.start = -1; wr.trailing = -1;
- for(int i = 0; i < textFormatted.text.length(); ) {
- charPos[i] = w; charHeights[i] = textFormat[idx].height;
- w += metrics.charWidth(textFormatted.text, i);
- if(!textFormatted.text[i].isSpace()) {
- if(wr.trailing >= 0) {
- // new word after space
- words.append(wr);
- wr.start = -1;
- }
- if(wr.start < 0) {
- wr.start = i; wr.length = 1; wr.trailing = -1; wr.height = textFormat[idx].height;
- } else {
- wr.length++; wr.height = qMax(wr.height, textFormat[idx].height);
- }
- } else {
- if(wr.start < 0) {
- wr.start = i; wr.length = 0; wr.trailing = 1; wr.height = 0;
- } else {
- wr.trailing++;
- }
- }
- if(++i < textFormatted.text.length() && ++cnt >= textFormat[idx].length) {
- cnt = 0; idx++;
- Q_ASSERT(idx < textFormat.count());
- metrics = QFontMetrics(textFormat[idx].format.font());
- }
- }
- charPos[textFormatted.text.length()] = w;
- if(wr.start >= 0) words.append(wr);
-}
-
-qreal ChatLine::layout(qreal tsw, qreal senderw, qreal textw) {
- tsWidth = tsw; senderWidth = senderw; textWidth = textw;
- if(textw <= 0) return minHeight;
- lineLayouts.clear(); LineLayout line;
- int h = 0;
- int offset = 0; int numWords = 0;
- line.y = 0;
- line.start = 0;
- line.height = minHeight; // first line needs room for ts and sender
- for(int i = 0; i < words.count(); i++) {
- int lastpos = charPos[words[i].start + words[i].length]; // We use charPos[lastchar + 1], 'coz last char needs to fit
- if(lastpos - offset <= textw) {
- line.height = qMax(line.height, words[i].height);
- line.length = words[i].start + words[i].length - line.start;
- numWords++;
- } else {
- // we need to wrap!
- if(numWords > 0) {
- // ok, we had some words before, so store the layout and start a new line
- h += line.height;
- line.length = words[i-1].start + words[i-1].length - line.start;
- lineLayouts.append(line);
- line.y += line.height;
- line.start = words[i].start;
- line.height = words[i].height;
- offset = charPos[words[i].start];
- }
- numWords = 1;
- // check if the word fits into the current line
- if(lastpos - offset <= textw) {
- line.length = words[i].length;
- } else {
- // we need to break a word in the middle
- int border = (int)textw + offset; // save some additions
- line.start = words[i].start;
- line.length = 1;
- line.height = charHeights[line.start];
- int j = line.start + 1;
- for(int l = 1; l < words[i].length; j++, l++) {
- if(charPos[j+1] < border) {
- line.length++;
- line.height = qMax(line.height, charHeights[j]);
- continue;
- } else {
- h += line.height;
- lineLayouts.append(line);
- line.y += line.height;
- line.start = j;
- line.height = charHeights[j];
- line.length = 1;
- offset = charPos[j];
- border = (int)textw + offset;
- }
- }
- }
- }
- }
- h += line.height;
- if(numWords > 0) {
- lineLayouts.append(line);
- }
- hght = h;
- return hght;
-}
-
-//!\brief Draw ChatLine on the given QPainter at the given position.
-void ChatLine::draw(QPainter *p, const QPointF &pos) {
- QPalette pal = QApplication::palette();
-
- if(selectionMode == Full) {
- p->setPen(Qt::NoPen);
- p->setBrush(pal.brush(QPalette::Highlight));
- p->drawRect(QRectF(pos, QSizeF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText() + textWidth, height())));
- } else if(selectionMode == Partial) {
-
- } /*
- p->setClipRect(QRectF(pos, QSizeF(tsWidth, height())));
- tsLayout.draw(p, pos, tsFormat);
- p->setClipRect(QRectF(pos + QPointF(tsWidth + Style::sepTsSender(), 0), QSizeF(senderWidth, height())));
- senderLayout.draw(p, pos + QPointF(tsWidth + Style::sepTsSender(), 0), senderFormat);
- p->setClipping(false);
- textLayout.draw(p, pos + QPointF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText(), 0), textFormat);
- */
- //p->setClipRect(QRectF(pos, QSizeF(tsWidth, 15)));
- //p->drawRect(QRectF(pos, QSizeF(tsWidth, minHeight)));
- p->setBackgroundMode(Qt::OpaqueMode);
- QPointF tp = pos;
- QRectF rect(pos, QSizeF(tsWidth, minHeight));
- QRectF brect;
- foreach(FormatRange fr, tsFormat) {
- p->setFont(fr.format.font());
- p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
- p->drawText(rect, Qt::AlignLeft|Qt::TextSingleLine, tsFormatted.text.mid(fr.start, fr.length), &brect);
- rect.setLeft(brect.right());
- }
- rect = QRectF(pos + QPointF(tsWidth + Style::sepTsSender(), 0), QSizeF(senderWidth, minHeight));
- for(int i = senderFormat.count() - 1; i >= 0; i--) {
- FormatRange fr = senderFormat[i];
- p->setFont(fr.format.font()); p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
- p->drawText(rect, Qt::AlignRight|Qt::TextSingleLine, senderFormatted.text.mid(fr.start, fr.length), &brect);
- rect.setRight(brect.left());
- }
- QPointF tpos = pos + QPointF(tsWidth + Style::sepTsSender() + senderWidth + Style::sepSenderText(), 0);
- qreal h = 0; int l = 0;
- rect = QRectF(tpos + QPointF(0, h), QSizeF(textWidth, lineLayouts[l].height));
- int offset = 0;
- foreach(FormatRange fr, textFormat) {
- if(l >= lineLayouts.count()) break;
- p->setFont(fr.format.font()); p->setPen(QPen(fr.format.foreground(), 0)); p->setBackground(fr.format.background());
- int start, end, frend, llend;
- do {
- frend = fr.start + fr.length;
- if(frend <= lineLayouts[l].start) break;
- llend = lineLayouts[l].start + lineLayouts[l].length;
- start = qMax(fr.start, lineLayouts[l].start); end = qMin(frend, llend);
- rect.setLeft(tpos.x() + charPos[start] - offset);
- p->drawText(rect, Qt::AlignLeft|Qt::TextSingleLine, textFormatted.text.mid(start, end - start), &brect);
- if(llend <= end) {
- h += lineLayouts[l].height;
- l++;
- if(l < lineLayouts.count()) {
- rect = QRectF(tpos + QPointF(0, h), QSizeF(textWidth, lineLayouts[l].height));
- offset = charPos[lineLayouts[l].start];
- }
- }
- } while(end < frend && l < lineLayouts.count());
- }
-}
/******************************************************************************************************************/
#ifndef _CHATWIDGET_H_
#define _CHATWIDGET_H_
-#include "style.h"
-#include "message.h"
-#include "buffer.h"
-#include <QtCore>
+//#include "style.h"
+//#include "message.h"
+//#include "buffer.h"
+//#include <QtCore>
#include <QtGui>
class ChatLine;
+class AbstractUiMsg;
//!\brief Scroll area showing part of the chat messages for a given buffer.
/** The contents of the scroll area, i.e. a widget of type ChatWidgetContents,
public slots:
void clear();
+
+ void prependMsg(AbstractUiMsg *);
+ void appendMsg(AbstractUiMsg *);
+
void prependChatLine(ChatLine *);
void appendChatLine(ChatLine *);
void prependChatLines(QList<ChatLine *>);
};
-//FIXME: chatline doku
-//!\brief Containing the layout and providing the rendering of a single message.
-/** A ChatLine takes a Message object,
- * formats it (by turning the various message types into a human-readable form and afterwards pumping it through
- * our Style engine), and stores it as a number of QTextLayouts representing the three fields of a chat line
- * (timestamp, sender and text). These layouts already include any rendering information such as font,
- * color, or selected characters. By calling layout(), they can be quickly layouted to fit a given set of field widths.
- * Afterwards, they can quickly be painted whenever necessary.
- *
- * By separating the complex and slow task of interpreting and formatting Message objects (which happens exactly once
- * per message) from the actual layouting and painting, we gain a lot of speed compared to the standard Qt rendering
- * functions.
- */
-class ChatLine : public QObject {
- Q_OBJECT
-
- public:
- ChatLine(Message message);
- ~ChatLine();
-
- qreal layout(qreal tsWidth, qreal nickWidth, qreal textWidth);
- qreal height() { return hght; }
- int posToCursor(QPointF pos);
- void draw(QPainter *p, const QPointF &pos);
-
- enum SelectionMode { None, Partial, Full };
- void setSelection(SelectionMode, int start = 0, int end = 0);
- QDateTime timeStamp();
- QString sender();
- QString text();
- uint msgId();
- BufferId bufferId();
-
- bool isUrl(int pos);
- QUrl getUrl(int pos);
-
- public slots:
-
- private:
- qreal hght;
- Message msg;
- qreal tsWidth, senderWidth, textWidth;
- Style::FormattedString tsFormatted, senderFormatted, textFormatted;
-
- struct FormatRange {
- int start;
- int length;
- int height;
- QTextCharFormat format;
- };
- struct Word {
- int start;
- int length;
- int trailing;
- int height;
- };
- struct LineLayout {
- int y;
- int height;
- int start;
- int length;
- };
- QVector<int> charPos;
- QVector<int> charWidths;
- QVector<int> charHeights;
- QVector<int> charUrlIdx;
- QList<FormatRange> tsFormat, senderFormat, textFormat;
- QList<Word> words;
- QList<LineLayout> lineLayouts;
- int minHeight;
-
- SelectionMode selectionMode;
- int selectionStart, selectionEnd;
- void formatMsg(Message);
- void precomputeLine();
- QList<FormatRange> calcFormatRanges(const Style::FormattedString &, QTextLayout::FormatRange additional = QTextLayout::FormatRange());
-};
-
-/*
-struct LayoutTask {
- QList<Message> messages;
- Buffer *buffer;
- QString net, buf;
- QList<ChatLine *> lines;
-};
-
-Q_DECLARE_METATYPE(LayoutTask);
-
-class LayoutThread : public QThread {
- Q_OBJECT
-
- public:
- LayoutThread();
- virtual ~LayoutThread();
- virtual void run();
-
- public:
- void processTask(LayoutTask task);
-
- signals:
- void taskProcessed(LayoutTask task);
-
- private:
- QList<LayoutTask> queue;
- QMutex mutex;
- QWaitCondition condition;
- bool abort;
-
-};
-*/
-
#endif
#include "mainwin.h"
#include "buffer.h"
+#include "chatline.h"
#include "serverlist.h"
#include "coreconnectdlg.h"
#include "settingsdlg.h"
}
void MainWin::init() {
-/*
- connect(guiProxy, SIGNAL(csServerState(QString, QVariant)), this, SLOT(recvNetworkState(QString, QVariant)));
- connect(guiProxy, SIGNAL(csServerConnected(QString)), this, SLOT(networkConnected(QString)));
- connect(guiProxy, SIGNAL(csServerDisconnected(QString)), this, SLOT(networkDisconnected(QString)));
- connect(guiProxy, SIGNAL(csDisplayMsg(Message)), this, SLOT(recvMessage(Message)));
- connect(guiProxy, SIGNAL(csDisplayStatusMsg(QString, QString)), this, SLOT(recvStatusMsg(QString, QString)));
- connect(guiProxy, SIGNAL(csTopicSet(QString, QString, QString)), this, SLOT(setTopic(QString, QString, QString)));
- connect(guiProxy, SIGNAL(csNickAdded(QString, QString, VarMap)), this, SLOT(addNick(QString, QString, VarMap)));
- connect(guiProxy, SIGNAL(csNickRemoved(QString, QString)), this, SLOT(removeNick(QString, QString)));
- connect(guiProxy, SIGNAL(csNickRenamed(QString, QString, QString)), this, SLOT(renameNick(QString, QString, QString)));
- connect(guiProxy, SIGNAL(csNickUpdated(QString, QString, VarMap)), this, SLOT(updateNick(QString, QString, VarMap)));
- connect(guiProxy, SIGNAL(csOwnNickSet(QString, QString)), this, SLOT(setOwnNick(QString, QString)));
- connect(guiProxy, SIGNAL(csBacklogData(BufferId, QList<QVariant>, bool)), this, SLOT(recvBacklogData(BufferId, QList<QVariant>, bool)));
- connect(guiProxy, SIGNAL(csUpdateBufferId(BufferId)), this, SLOT(updateBufferId(BufferId)));
- connect(this, SIGNAL(sendInput(BufferId, QString)), guiProxy, SLOT(gsUserInput(BufferId, QString)));
- connect(this, SIGNAL(requestBacklog(BufferId, QVariant, QVariant)), guiProxy, SLOT(gsRequestBacklog(BufferId, QVariant, QVariant)));
-
- //layoutThread = new LayoutThread();
- //layoutThread->start();
- //while(!layoutThread->isRunning()) {};
-*/
ui.bufferWidget->init();
show();
*/
}
+AbstractUiMsg *MainWin::layoutMsg(const Message &msg) {
+ return new ChatLine(msg);
+}
+
void MainWin::showServerList() {
// if(!serverListDlg) {
// serverListDlg = new ServerListDlg(this);
#include <QtGui>
#include "ui_mainwin.h"
-#include "global.h"
+#include "quasselui.h"
+//#include "global.h"
#include "message.h"
#include "chatwidget.h"
#include "bufferviewfilter.h"
* dockwidgets and of course the chat window, this class also stores all data it
* receives from the core, and it maintains a list of all known nicks.
*/
-class MainWin : public QMainWindow {
+class MainWin : public QMainWindow, public AbstractUi {
Q_OBJECT
public:
void init();
void registerBufferViewDock(BufferViewDock *);
+ AbstractUiMsg *layoutMsg(const Message &);
+
protected:
void closeEvent(QCloseEvent *event);
- signals:
- //void sendInput(BufferId, QString message);
- //void bufferSelected(Buffer *);
- //void bufferUpdated(Buffer *);
- //void bufferActivity(Buffer::ActivityLevel, Buffer *);
- //void bufferDestroyed(Buffer *);
- //void backlogReceived(Buffer *, QList<Message>);
- //void requestBacklog(BufferId, QVariant, QVariant);
-
- void importOldBacklog();
+ //void importOldBacklog();
private slots:
-
- //void userInput(BufferId, QString);
- //void networkConnected(QString);
- //void networkDisconnected(QString);
- //void recvNetworkState(QString, QVariant);
- //void recvMessage(Message message);
- //void recvStatusMsg(QString network, QString message);
- //void setTopic(QString net, QString buf, QString);
- //void addNick(QString net, QString nick, VarMap props);
- //void removeNick(QString net, QString nick);
- //void renameNick(QString net, QString oldnick, QString newnick);
- //void updateNick(QString net, QString nick, VarMap props);
- //void setOwnNick(QString net, QString nick);
- //void recvBacklogData(BufferId, QList<QVariant>, bool);
- //void updateBufferId(BufferId);
void showServerList();
void showSettingsDlg();
void importBacklog();
+ signals:
+ void importOldBacklog();
+
private:
Ui::MainWin ui;
void setupMenus();
void setupViews();
void setupSettingsDlg();
- //void syncToCore(); // implemented in main_mono.cpp or main_gui.cpp
- //Buffer * getBuffer(QString net, QString buf);
- //Buffer *getBuffer(BufferId);
- //BufferId getStatusBufferId(QString net);
- //BufferId getBufferId(QString net, QString buf);
- //void buffersUpdated();
QSystemTrayIcon *systray;
- //QWorkspace *workspace;
- //QWidget *widget;
- //BufferWidget *bufferWidget;
ServerListDlg *serverListDlg;
CoreConnectDlg *coreConnectDlg;
SettingsDlg *settingsDlg;
- //QString currentNetwork, currentBuffer;
- //QHash<QString, QHash<QString, Buffer*> > buffers;
uint currentBuffer;
- //QHash<BufferId, Buffer *> buffers;
- //QHash<uint, BufferId> bufferIds;
- //QHash<QString, QHash<QString, VarMap> > nicks;
- //QHash<QString, bool> connected;
- //QHash<QString, QString> ownNick;
- //QHash<QString, QList<Message> > coreBackLog;
- //QList<BufferId> coreBuffers;
QList<BufferViewDock *> netViews;
- //QTimer *layoutTimer;
- //QList<Message> layoutQueue;
};
#endif
/***************************************************************************
- * Copyright (C) 2005-07 by The Quassel Team *
+ * Copyright (C) 2005-07 by The Quassel IRC Development Team *
* devel@quassel-irc.org *
* *
* This program is free software; you can redistribute it and/or modify *
/***************************************************************************
- * Copyright (C) 2005-07 by The Quassel Team *
+ * Copyright (C) 2005-07 by The Quassel IRC Development Team *
* devel@quassel-irc.org *
* *
* This program is free software; you can redistribute it and/or modify *