# General setup
#####################################################################
-cmake_minimum_required(VERSION 2.8.9)
project(QuasselIRC)
# Versions
set(QUASSEL_MAJOR 0)
-set(QUASSEL_MINOR 11)
-set(QUASSEL_PATCH 0)
-set(QUASSEL_VERSION_STRING "0.11-pre")
+set(QUASSEL_MINOR 12)
+set(QUASSEL_PATCH 2)
+set(QUASSEL_VERSION_STRING "0.12.2")
+
+# We want to know CMake's version for debug reasons
+message(STATUS "Using CMake ${CMAKE_VERSION}")
# Tell CMake about or own modules
set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
add_feature_info(WANT_QTCLIENT WANT_QTCLIENT "Build the client-only binary (requires a core to connect to)")
add_feature_info(WANT_MONO WANT_MONO "Build the monolithic (all-in-one) binary")
-# Whether to enable KDE integration (pulls in kdelibs and friends as a dependency); requires Qt4 for now
-cmake_dependent_option(WITH_KDE "KDE4 integration" OFF "USE_QT4" OFF)
-add_feature_info(WITH_KDE WITH_KDE "Enable KDE4 integration")
+# Whether to enable KDE integration (work in progress for Qt5 / KDE Frameworks)
+# Note that when building with Qt5, WITH_KDE enables integration with higher-tier KDE frameworks that
+# require runtime support. We still optionally make use of certain Tier 1 frameworks even if WITH_KDE
+# is disabled.
+if (USE_QT4)
+ option(WITH_KDE "KDE4 integration" OFF)
+ add_feature_info(WITH_KDE WITH_KDE "Enable KDE4 integration")
+else()
+ option(WITH_KDE "Integration with the KDE Frameworks runtime environment")
+ add_feature_info(WITH_KDE WITH_KDE "Integrate with the KDE Frameworks runtime environment")
+endif()
cmake_dependent_option(WITH_OXYGEN "Install Oxygen icon set (usually shipped with KDE)" ON "NOT WITH_KDE" OFF)
if (NOT WITH_KDE)
endif()
+# Setup CMake
+#####################################################################
+
+if (USE_QT5 AND WITH_KDE)
+ cmake_minimum_required(VERSION 2.8.12)
+else()
+ cmake_minimum_required(VERSION 2.8.9)
+endif()
+
+# Setting COMPILE_DEFINITIONS_<CONFIG> is deprecated since CMake 3.0 in favor of generator expressions.
+# These have existed since CMake 2.8.10; until we depend on that, we have to explicitly enable the old policy.
+if (CMAKE_MAJOR_VERSION GREATER 2)
+ cmake_policy(SET CMP0043 OLD)
+endif()
+
+
# Simplify later checks
#####################################################################
add_definitions(-DHAVE_QT5)
else()
message(STATUS "Building for Qt4...")
- if (BUILD_GUI)
- set(QT_MIN_VERSION "4.6.0")
- else()
- set(QT_MIN_VERSION "4.4.0")
- endif()
+ set(QT_MIN_VERSION "4.8.0")
# Select a Qt installation here, if you don't want to use system Qt
if(QT_PATH)
endif()
endif()
+
# Find package dependencies
#
# Note that you can forcefully disable optional packages
# using -DCMAKE_DISABLE_FIND_PACKAGE_<PkgName>=TRUE
#####################################################################
-if(USE_QT5)
+if (USE_QT5)
find_package(Qt5Core ${QT_MIN_VERSION} QUIET)
set_package_properties(Qt5Core PROPERTIES TYPE REQUIRED
URL "http://qt.digia.com"
DESCRIPTION "contains core functionality for Qt"
)
+ # find_package without REQUIRED won't check for the version properly; also, older Qt5 versions
+ # used Qt5Core_VERSION_STRING... let's just make sure here that we bail out here if our Qt5 is not new enough.
+ if (NOT Qt5Core_VERSION OR Qt5Core_VERSION VERSION_LESS ${QT_MIN_VERSION})
+ message(FATAL_ERROR "Could NOT find Qt5 >= version ${QT_MIN_VERSION}!")
+ endif()
+
find_package(Qt5Network QUIET)
set_package_properties(Qt5Network PROPERTIES TYPE REQUIRED
DESCRIPTION "the network module for Qt5"
PURPOSE "Required for audio notifications"
)
+ find_package(LibsnoreQt5 QUIET)
+ set_package_properties(LibsnoreQt5 PROPERTIES TYPE OPTIONAL
+ URL "https://github.com/TheOneRing/Snorenotify"
+ DESCRIPTION "a cross-platform notification framework"
+ PURPOSE "Enable support for the snorenotify framework"
+ )
+
if (WITH_WEBKIT)
find_package(Qt5WebKit QUIET)
set_package_properties(Qt5WebKit PROPERTIES TYPE RECOMMENDED
)
endif()
endif()
- add_feature_info("WITH_WEBKIT, QtWebKit and QtWebKitWidgets modules" Qt5WebKitWidgets_FOUND "Support showing previews for URLs in chat")
+
+ if (WITH_WEBKIT AND Qt5WebKitWidgets_FOUND)
+ set(HAVE_WEBKIT true)
+ endif()
+ add_feature_info("WITH_WEBKIT, QtWebKit and QtWebKitWidgets modules" HAVE_WEBKIT "Support showing previews for URLs in chat")
+
+ # KDE Frameworks
+ ################
+
+ if (WITH_KDE)
+ set(ecm_find_type "REQUIRED")
+ else()
+ # Even with KDE integration disabled, we optionally use tier1 frameworks if we find them
+ set(ecm_find_type "RECOMMENDED")
+ endif()
+
+ # extra-cmake-modules
+ find_package(ECM NO_MODULE QUIET)
+ set_package_properties(ECM PROPERTIES TYPE ${ecm_find_type}
+ URL "https://projects.kde.org/projects/kdesupport/extra-cmake-modules"
+ DESCRIPTION "extra modules for CMake, maintained by the KDE project"
+ PURPOSE "Required to find KDE Frameworks components"
+ )
+
+ if (ECM_FOUND)
+ list(APPEND CMAKE_MODULE_PATH ${ECM_MODULE_PATH})
+ endif()
+
+ if (WITH_KDE)
+ find_package(KF5 COMPONENTS ConfigWidgets CoreAddons Notifications NotifyConfig TextWidgets WidgetsAddons XmlGui QUIET)
+ set_package_properties(KF5 PROPERTIES TYPE REQUIRED
+ URL "http://www.kde.org"
+ DESCRIPTION "KDE Frameworks"
+ PURPOSE "Required for integration into the Plasma desktop"
+ )
+
+ endif()
endif(BUILD_GUI)
+
if (BUILD_CORE)
find_package(Qt5Script QUIET)
set_package_properties(Qt5Script PROPERTIES TYPE REQUIRED
DESCRIPTION "the database support module for Qt5"
)
- # While QCA2 seems to support Qt5, it is not actually co-installable or distinguishable from the Qt4 version...
- # In order to avoid linking against the Qt4 version (which is probably the one installed), disable this for now
- #find_package(QCA2 QUIET)
- #set_package_properties(QCA2 PROPERTIES TYPE RECOMMENDED
- # URL "https://projects.kde.org/projects/kdesupport/qca"
- # DESCRIPTION "Qt Cryptographic Architecture"
- # PURPOSE "Required for encryption support"
- #)
+ find_package(QCA2-QT5)
+ set_package_properties(QCA2-QT5 PROPERTIES TYPE RECOMMENDED
+ URL "https://projects.kde.org/projects/kdesupport/qca"
+ DESCRIPTION "Qt Cryptographic Architecture"
+ PURPOSE "Required for encryption support"
+ )
endif(BUILD_CORE)
DESCRIPTION "contains tools for handling translation files"
PURPOSE "Required for having translations"
)
- # Qt5 does not define a target for lconvert, so we need to find it ourselves
+
+ # Some Qt5 versions do not define a target for lconvert, so we need to find it ourselves
if (Qt5LinguistTools_FOUND)
if (NOT TARGET Qt5::lconvert AND TARGET Qt5::lrelease)
get_target_property(_lrelease_location Qt5::lrelease LOCATION)
get_filename_component(_lrelease_path ${_lrelease_location} PATH)
find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ elseif(TARGET Qt5::lconvert AND NOT Qt5_LCONVERT_EXECUTABLE)
+ # Newer Qt5 versions define the target, but not the Qt5_LCONVERT_EXECUTABLE variable for some reason
+ get_target_property(QT_LCONVERT_EXECUTABLE Qt5::lconvert LOCATION)
endif()
+
# Compatibility with the Qt4 variables
- set (QT_LRELEASE_EXECUTABLE ${Qt5_LRELEASE_EXECUTABLE})
- set (QT_LUPDATE_EXECUTABLE ${Qt5_LUPDATE_EXECUTABLE})
+ set(QT_LRELEASE_EXECUTABLE ${Qt5_LRELEASE_EXECUTABLE})
+ set(QT_LUPDATE_EXECUTABLE ${Qt5_LUPDATE_EXECUTABLE})
+ if (Qt5_LCONVERT_EXECUTABLE)
+ set(QT_LCONVERT_EXECUTABLE ${Qt5_LCONVERT_EXECUTABLE})
+ endif()
endif()
else(USE_QT5)
)
endif(BUILD_GUI)
+
if (BUILD_CORE)
find_package(QCA2 QUIET)
)
endif()
-
-# Various checks
-#####################################################################
-
-if (NOT ZLIB_FOUND)
- message(STATUS "zlib NOT found, using bundled miniz for compression")
- if (${CMAKE_SIZEOF_VOID_P} EQUAL 4)
- message(STATUS "WARNING: This may be slow on 32 bit systems!")
- endif()
-endif()
-
-if (KDE4_FOUND)
- # We always use external icons for KDE4 support, since we use its iconloader rather than our own
- set(EMBED_DATA OFF)
-
- # Better have the compile flags global, even for the core, to avoid problems with linking the mono client
- add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
-endif()
-
# Check for SSL support in Qt
# As there's no easy way to get Qt's configuration in particular for Qt5, let's just compile
# a small test program checking the defines. This works for both Qt4 and Qt5.
cmake_push_check_state(RESET)
-if (Qt5_POSITION_INDEPENDENT_CODE)
- set(CMAKE_POSITION_INDEPENDENT_CODE ON)
-endif()
set(CMAKE_REQUIRED_INCLUDES ${QT_INCLUDES} ${Qt5Core_INCLUDE_DIRS})
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Core_EXECUTABLE_COMPILE_FLAGS}")
check_cxx_source_compiles("
#include \"qglobal.h\"
#if defined QT_NO_OPENSSL || defined QT_NO_SSL
HAVE_SSL)
cmake_pop_check_state()
+# Additional compile settings
+#####################################################################
+
+# This sets -fPIC and friends if required by the installed Qt5 library
+if (USE_QT5 AND Qt5_POSITION_INDEPENDENT_CODE)
+ set(CMAKE_POSITION_INDEPENDENT_CODE ON)
+endif()
+
+# Needed to compile with mingw without kde
+if (MINGW AND NOT KDE4_FOUND)
+ add_definitions(-D_WIN32_WINNT=0x0500)
+ message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+ # workaround for bug in mingw gcc 4.0
+ add_definitions(-U__STRICT_ANSI__)
+endif()
+
+# Sanitize compiler flags - old versions of KDE set -ansi, which breaks -std=c++11
+if (CMAKE_COMPILER_IS_GNUCXX)
+ string(REPLACE "-ansi" "" CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS})
+endif()
+
+
+# Setup KDE / KDE Frameworks
+#####################################################################
+
+# We want to do this up here, so we have the necessary variables and defines set before
+# compiling anything
+
+if (KDE4_FOUND)
+ # We always use external icons for KDE4 support, since we use its iconloader rather than Qt's
+ set(EMBED_DATA OFF)
+
+ # Better have the compile flags global, even for the core, to avoid problems with linking the mono client
+ add_definitions(-DHAVE_KDE -DHAVE_KDE4 ${KDE4_DEFINITIONS})
+ set(WITH_KDE4 TRUE)
+endif()
+
+if (USE_QT5 AND WITH_KDE)
+ # If KDE Frameworks are present, they're most probably providing Qt5 integration including icon loading
+ set(EMBED_DATA OFF)
+
+ include(KDEInstallDirs)
+ include(KDECompilerSettings)
+ include(KDECMakeSettings)
+
+ add_definitions(-DHAVE_KDE -DHAVE_KF5)
+ set(WITH_KF5 TRUE)
+endif()
+
+# This needs to come after setting up KDE integration, so we can use KDE-specific paths
+include(QuasselInstallDirs)
+
+# Various config-dependent checks and settings
+#####################################################################
+
+if (NOT ZLIB_FOUND)
+ message(STATUS "zlib NOT found, using bundled miniz for compression")
+ if (${CMAKE_SIZEOF_VOID_P} EQUAL 4)
+ message(STATUS "WARNING: This may be slow on 32 bit systems!")
+ endif()
+endif()
+
if (HAVE_SSL)
add_definitions(-DHAVE_SSL)
endif()
add_feature_info("Qt Linguist Tools" QT_LCONVERT_EXECUTABLE "Translation support for Quassel")
-# Various settings
-##################
+if (EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else()
+ message(STATUS "Installing data files separately")
+endif()
-# needed to compile with mingw without kde
-if (MINGW AND NOT KDE4_FOUND)
- add_definitions(-D_WIN32_WINNT=0x0500)
- message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
-# workaround for bug in mingw gcc 4.0
- add_definitions(-U__STRICT_ANSI__)
+if (INDICATEQT_FOUND)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${CMAKE_INSTALL_APPDIR})
endif()
-# Now set up install locations; those are set by KDE if integration is enabled
-if(NOT KDE4_FOUND)
- if(WIN32)
- set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
- set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
- set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
- set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
- else(WIN32)
- set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
- set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
- set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
- set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
- endif(WIN32)
+if (NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+ if(HAVE_UMASK)
+ add_definitions(-DHAVE_UMASK)
+ endif(HAVE_UMASK)
endif()
-if(EMBED_DATA)
- message(STATUS "Embedding data files into the binary")
-else(EMBED_DATA)
- message(STATUS "Installing data files separately")
-endif(EMBED_DATA)
-# RPATH needs to be set correctly
-# Do this down here, since otherwise KDE wants to handle it itself, and fails
-set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
-set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
+# Windows-specific stuff
+#####################################################################
+
+if (WIN32)
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+ if (MSVC)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /DNOMINMAX")
+ set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+ link_libraries(Version dwmapi shlwapi)
+ if (USE_QT5)
+ set(QT_QTMAIN_LIBRARY Qt5::WinMain)
+ endif()
+ endif()
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
+ link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+ endif()
+endif()
+
+
+# Static builds (very much non-portable, so don't use -DSTATIC
+# unless you know what you do!)
+#####################################################################
-# Set global buildflags
-# This is very much non-portable, so don't use -DSTATIC until you know what
-# you do.
if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
- set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
- link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
- if(HAVE_SSL)
- set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
- endif(HAVE_SSL)
-endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
-
-if(WIN32)
- link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
- if(MSVC)
- set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
- set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
- set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
- link_libraries(Version dwmapi shlwapi)
- endif(MSVC)
- if(HAVE_SSL AND STATIC)
- find_package(OpenSSL REQUIRED)
- link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
- endif(HAVE_SSL AND STATIC)
-endif(WIN32)
-
-if(INDICATEQT_FOUND)
- add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+ set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
+ link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
+ if (HAVE_SSL)
+ set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
+ endif()
endif()
-if(NOT WIN32)
- check_function_exists(umask HAVE_UMASK)
- if(HAVE_UMASK)
- add_definitions(-DHAVE_UMASK)
- endif(HAVE_UMASK)
-endif(NOT WIN32)
# Generate version information from Git
+#####################################################################
+
include(GetGitRevisionDescription)
get_git_head_revision(GIT_REFSPEC GIT_HEAD)
git_describe(GIT_DESCRIBE --long)
+# If not in a Git repo try to read GIT_HEAD and GIT_DESCRIBE from
+# enviroment
+if (NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+ if (DEFINED ENV{GIT_HEAD})
+ set(GIT_HEAD $ENV{GIT_HEAD})
+ endif ()
+ if (DEFINED ENV{GIT_DESCRIBE})
+ set(GIT_DESCRIBE $ENV{GIT_DESCRIBE})
+ endif()
+endif()
+
# Sanitize things if we're not in a Git repo
-if(NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+if (NOT GIT_HEAD OR NOT GIT_DESCRIBE)
set(GIT_HEAD "")
set(GIT_DESCRIBE "")
endif()
configure_file(version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
+# Prepare the build
+#####################################################################
+
# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
set(COMMON_DEPS ${RC_WIN32})
set(CORE_DEPS )
add_subdirectory(pics)
add_subdirectory(po)
+
# Set up and display feature summary
#####################################################################
# Finally, compile the sources
# We want this after displaying the feature summary to avoid ugly
-# CMake backtraces in case a required Qt5 modules misses
+# CMake backtraces in case a required Qt5 module is missing
#####################################################################
add_subdirectory(src)