X-Git-Url: https://git.quassel-irc.org/?p=quassel.git;a=blobdiff_plain;f=CMakeLists.txt;h=1bd917c9ab9f529fc2d46831641ff119fa5a06ea;hp=0f8a87ae862d8a4dd3c42193cf29fd411f230511;hb=68ee619cbd98ba95c12efb12a7d32d5ca567b40e;hpb=f8dcbdf74b286506cc19b6efcad8c7d128f8fc80

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 0f8a87ae..1bd917c9 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,6 +1,7 @@
 # This is the cmake-based build system for Quassel IRC.
 #
 # You may pass various options to cmake:
+#
 # -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
 #                        : select binaries to build
 # -DWITH_OPENSSL=OFF     : Disable OpenSSL support
@@ -9,7 +10,9 @@
 # -DWITH_PHONON=OFF      : Disable Phonon support (audio notifications)
 # -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
 # -DWITH_KDE=ON          : Enable KDE4 support
+# -DWITH_CRYPT=OFF       : Disable encryption support
 # -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
+# -DWITH_SYSLOG=OFF      : Disable syslog support
 #
 # -DEMBED_DATA=ON        : Embed all data files in icons the binary, rather than installing them separately
 #
@@ -17,11 +20,18 @@
 # -DSTATIC=ON            : Enable static building of Quassel. Use with care.
 # -DDEPLOY=ON            : Mac OS X only. Use only for creating Quassel Packages!
 #
+# -DWITH_QT5=ON          : Enable (very) experimental support for Qt5 (see doc/README.Qt5!)
+#
 # NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
 
+
 project(QuasselIRC)
 
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+
 # cmake 2.6.2 is required for KDE >=4.2 and should be widespread enough now
+# For building against Qt5, we check for an even newer cmake version below!
 cmake_minimum_required(VERSION 2.6.2 FATAL_ERROR)
 
 if(COMMAND cmake_policy)
@@ -44,12 +54,17 @@ option(WITH_WEBKIT   "Enable WebKit support (for link previews)"	ON)
 option(WITH_PHONON   "Enable Phonon support (for audio notifications)"	ON)
 option(WITH_LIBINDICATE "Enable Ayatana notification support"           ON)
 option(WITH_KDE      "Enable KDE4 integration"				OFF)
+option(WITH_CRYPT    "Enable encryption support if present on system"	ON)
+option(WITH_SYSLOG   "Use syslog for storing log data"			ON)
 
 # We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
 # even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
 # run on a matching KDE version only.
 set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
 
+# Enable very experimental support for Qt5. Might break the compilation, or even more!
+option(WITH_QT5      "Enable (very) experimental support for Qt5"       OFF)
+
 option(STATIC        "Enable static building (might not be portable)" OFF)
 
 if(APPLE)
@@ -103,6 +118,17 @@ if(NOT CMAKE_BUILD_TYPE)
   set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
 endif(NOT CMAKE_BUILD_TYPE)
 
+# Qt debug flags
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_FULLDEBUG QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL QT_NO_DEBUG NDEBUG)
+
+IF(NOT CMAKE_CONFIGURATION_TYPES AND NOT CMAKE_BUILD_TYPE)
+  set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS QT_NO_DEBUG NDEBUG)
+ENDIF()
+
 # Enable various flags on gcc
 if(CMAKE_COMPILER_IS_GNUCXX)
   # Let's just hope that all gccs support these options and skip the tests...
@@ -114,25 +140,80 @@ if(CMAKE_COMPILER_IS_GNUCXX)
   set(CMAKE_CXX_FLAGS_DEBUGFULL        "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
 endif(CMAKE_COMPILER_IS_GNUCXX)
 
-string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
-if(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
-  add_definitions(-DNDEBUG -DQT_NO_DEBUG)
-else(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
-  set(DEBUG 1)
-endif(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+# Mac build stuff
+if(APPLE AND DEPLOY)
+  set(CMAKE_OSX_ARCHITECTURES "x86_64")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.6")
+  set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.6.sdk/")
+  add_definitions(-DMAC_10_6_SDK)
+endif(APPLE AND DEPLOY)
 
+# Simplify checks
 if(WANT_MONO OR WANT_QTCLIENT)
-  set(QT_MIN_VERSION "4.5.0")
-else(WANT_MONO OR WANT_QTCLIENT)
-  set(QT_MIN_VERSION "4.4.0")
+  set(BUILD_GUI true)
 endif(WANT_MONO OR WANT_QTCLIENT)
+if(WANT_MONO OR WANT_CORE)
+  set(BUILD_CORE true)
+endif(WANT_MONO OR WANT_CORE)
+
+
+# Version checks
+################
+
+if(WITH_QT5)
+  set(QT_MIN_VERSION "5.0.0")
+  add_definitions(-DHAVE_QT5)
+
+  # Qt5 needs a new enough cmake...
+  cmake_minimum_required(VERSION 2.8.6 FATAL_ERROR)
+
+  # ... for automoc
+  set(CMAKE_AUTOMOC ON)
+else(WITH_QT5)
+
+  # GUI stuff needs some new features
+  if(BUILD_GUI)
+    set(QT_MIN_VERSION "4.6.0")
+  else(BUILD_GUI)
+    set(QT_MIN_VERSION "4.4.0")
+  endif(BUILD_GUI)
+endif(WITH_QT5)
+
+
+# Dependencies
+##############
+
+if(WITH_QT5)
+  find_package(Qt5Core ${QT_MIN_VERSION} REQUIRED)
+  # We need QtWidgets
+  set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Widgets)
+
+  # Setup the i18n-related variables
+  find_package(Qt5LinguistTools)
+
+else(WITH_QT5)
+  # Select a Qt installation here, if you don't want to use system Qt
+  if(QT)
+    # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
+    set(ENV{PATH} ${QT}/bin:$ENV{PATH})
+  endif(QT)
+
+  # Now that we have the correct $PATH, lets find Qt!
+  find_package(Qt4 ${QT_MIN_VERSION} REQUIRED)
+endif(WITH_QT5)
+
+
+# Neither Qt4 nor Qt5 consider lconvert relevant, so they don't support finding it...
+# Rather than shipping hacked buildsys files, let's just infer the path from lrelease
+if(QT_LRELEASE_EXECUTABLE)
+  get_filename_component(_lrelease_path ${QT_LRELEASE_EXECUTABLE} PATH)
+  if(WITH_QT5)
+    find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+  else(WITH_QT5)
+    find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt4 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+  endif(WITH_QT5)
+endif(QT_LRELEASE_EXECUTABLE)
 
-if(APPLE AND DEPLOY)
-  set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.4")
-  set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.4u.sdk/")
-  add_definitions(-DMAC_10_4_SDK)
-endif(APPLE AND DEPLOY)
 
 # Execinfo is needed for generating backtraces
 find_package(ExecInfo)
@@ -142,18 +223,15 @@ if(EXECINFO_FOUND)
   link_libraries(${EXECINFO_LIBRARIES})
 endif(EXECINFO_FOUND)
 
-# Select a Qt installation here, if you don't want to use system Qt
-if(QT)
-  # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
-  set(ENV{PATH} ${QT}/bin:$ENV{PATH})
-endif(QT)
 
-# Now that we have the correct $PATH, lets find Qt!
-find_package(Qt4 REQUIRED)
+# PkgConfig isn't strictly required.
+# However, some optional deps might not be found if it's not present, so warn!
+find_package(PkgConfig)
+if(NOT PKG_CONFIG_FOUND)
+  message(STATUS "WARNING: PkgConfig not available! Some dependencies for optional features might not be found.")
+  message(STATUS "         Affected features might include encryption support, DBus menus and Ayatana notifications.")
+endif(NOT PKG_CONFIG_FOUND)
 
-set(QT_DONT_USE_QTGUI 1)
-include(${QT_USE_FILE})
-include_directories(${QT_INCLUDES})
 
 # Setup OpenSSL
 # We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
@@ -172,83 +250,175 @@ else(WITH_OPENSSL)
   message(STATUS "Not enabling OpenSSL support")
 endif(WITH_OPENSSL)
 
-# Setup D-Bus support
-if(WITH_DBUS)
-  if(QT_QTDBUS_FOUND)
-    message(STATUS "Found QtDBus, enabling D-Bus support")
-    add_definitions(-DHAVE_DBUS)
-    set(LINK_DBUS DBUS)
-    set(HAVE_DBUS true)
-  else(QT_QTDBUS_FOUND)
-    message(STATUS "QtDBus not found, disabling D-Bus support")
-  endif(QT_QTDBUS_FOUND)
-else(WITH_DBUS)
-  message(STATUS "Not enabling D-Bus support")
-endif(WITH_DBUS)
-
-# Setup QtWebKit support
-if(WITH_WEBKIT)
-  if(QT_QTWEBKIT_FOUND)
-    message(STATUS "Found QtWebKit, enabling WebKit support")
-    add_definitions(-DHAVE_WEBKIT)
-    set(LINK_WEBKIT WEBKIT)
-    set(HAVE_WEBKIT true)
-  else(QT_QTWEBKIT_FOUND)
-    message(STATUS "QtWebKit not found, disabling WebKit support")
-  endif(QT_QTWEBKIT_FOUND)
-else(WITH_WEBKIT)
-  message(STATUS "Not enabling WebKit support")
-endif(WITH_WEBKIT)
-
-# Setup KDE4 support
-if(WITH_KDE)
-  find_package(KDE4)
-  if(KDE4_FOUND)
-    message(STATUS "Enabling KDE4 integration")
-    include_directories(${KDE4_INCLUDES})
-    add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
-    set(HAVE_KDE 1)
-    set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
-    # We always use external icons for KDE4 support, since we use its iconloader rather than our own
-    set(EMBED_DATA OFF)
-  else(KDE4_FOUND)
-    message(STATUS "KDE4 not found, disabling KDE integration")
-  endif(KDE4_FOUND)
-else(WITH_KDE)
-  message(STATUS "Not enabling KDE4 integration")
-endif(WITH_KDE)
-
-# Setup Phonon support - we only need this if we don't have or want KDE4
-if(NOT HAVE_KDE)
-  if(WITH_PHONON)
-    find_package(Phonon)
-    if(PHONON_FOUND)
-      message(STATUS "Enabling Phonon support")
-      add_definitions(-DHAVE_PHONON)
-      set(HAVE_PHONON true)
-    else(PHONON_FOUND)
-      message(STATUS "Phonon not found, disabling audio notifications")
-    endif(PHONON_FOUND)
-  else(WITH_PHONON)
-    message(STATUS "Not enabling Phonon support")
-  endif(WITH_PHONON)
-endif(NOT HAVE_KDE)
 
-# Setup libindicate-qt support
-if(WITH_LIBINDICATE)
-  find_package(PkgConfig QUIET)
-  if(PKG_CONFIG_FOUND)
-    pkg_check_modules(INDICATEQT indicate-qt>=0.2.1)
+# Check for GUI specific stuff
+if(BUILD_GUI)
+
+  # Setup D-Bus support
+  if(WITH_DBUS)
+    if(WITH_QT5)
+      find_package(Qt5DBus ${QT_MIN_VERSION})
+      find_package(Qt5DBusTools)
+    endif(WITH_QT5)
+
+    if(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+      message(STATUS "Found QtDBus, enabling D-Bus support")
+      add_definitions(-DHAVE_DBUS)
+      set(HAVE_DBUS true)
+      set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} DBus)
+
+      # check if we have dbusmenu as well
+      if(NOT WITH_QT5)
+        find_package(DBusMenuQt)
+        if(DBUSMENUQT_FOUND)
+          message(STATUS "Enabling support for exporting the tray menu via D-Bus")
+          add_definitions(-DHAVE_DBUSMENU)
+          include_directories(${DBUSMENUQT_INCLUDE_DIR})
+          set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${DBUSMENUQT_LIBRARIES})
+          set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} ${DBUSMENUQT_DEFINITIONS}")
+        else(DBUSMENUQT_FOUND)
+          message(STATUS "Disabling support for exporting the tray menu via D-Bus")
+        endif(DBUSMENUQT_FOUND)
+      endif(NOT WITH_QT5)
+
+    else(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+      message(STATUS "QtDBus not found, disabling D-Bus support")
+    endif(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+  else(WITH_DBUS)
+    message(STATUS "Not enabling D-Bus support")
+  endif(WITH_DBUS)
+
+  # Setup QtWebkit support
+  if(WITH_WEBKIT)
+    if(WITH_QT5)
+      find_package(Qt5Webkit ${QT_MIN_VERSION} QUIET)
+    endif(WITH_QT5)
+    if(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+      message(STATUS "Found QtWebKit, enabling WebKit support")
+      add_definitions(-DHAVE_WEBKIT)
+      set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Webkit XmlPatterns)
+      set(HAVE_WEBKIT true)
+    else(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+      message(STATUS "QtWebkit not found, disabling Webkit support")
+    endif(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+  else(WITH_WEBKIT)
+    message(STATUS "Not enabling Webkit support")
+  endif(WITH_WEBKIT)
+
+  # Setup KDE4 support
+  if(WITH_KDE AND NOT WITH_QT5)
+    find_package(KDE4)
+    if(KDE4_FOUND)
+      message(STATUS "Enabling KDE4 integration")
+      include_directories(${KDE4_INCLUDES})
+      add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+      set(HAVE_KDE 1)
+      set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
+      # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+      set(EMBED_DATA OFF)
+    else(KDE4_FOUND)
+      message(STATUS "KDE4 not found, disabling KDE integration")
+    endif(KDE4_FOUND)
+  else(WITH_KDE AND NOT WITH_QT5)
+    message(STATUS "Not enabling KDE4 integration")
+  endif(WITH_KDE AND NOT WITH_QT5)
+
+  # Setup Phonon support - we only need this if we don't have or want KDE4
+  if(NOT HAVE_KDE)
+    if(WITH_PHONON)
+      if(WITH_QT5)
+        find_package(Qt5phonon)
+        if(Qt5phonon_FOUND)
+          message(STATUS "Enabling Phonon support")
+          add_definitions(-DHAVE_PHONON)
+          set(HAVE_PHONON true)
+          set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} phonon)
+        else(Qt5phonon_FOUND)
+          message(STATUS "Phonon not found, disabling audio notifications")
+        endif(Qt5phonon_FOUND)
+      else(WITH_QT5)
+        find_package(Phonon)
+        if(PHONON_FOUND)
+          message(STATUS "Enabling Phonon support")
+          add_definitions(-DHAVE_PHONON)
+          include_directories(${PHONON_INCLUDES})
+          set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${PHONON_LIBS})
+          set(HAVE_PHONON true)
+        else(PHONON_FOUND)
+          message(STATUS "Phonon not found, disabling audio notifications")
+        endif(PHONON_FOUND)
+      endif(WITH_QT5)
+    else(WITH_PHONON)
+      message(STATUS "Not enabling Phonon support")
+    endif(WITH_PHONON)
+  endif(NOT HAVE_KDE)
+
+  # Setup libindicate-qt support
+  if(WITH_LIBINDICATE AND NOT WITH_QT5)
+    pkg_check_modules(INDICATEQT QUIET indicate-qt>=0.2.1)
     if(INDICATEQT_FOUND)
       message(STATUS "Enabling Ayatana notification support")
+      set(HAVE_INDICATEQT true)
       add_definitions(-DHAVE_INDICATEQT)
+      link_directories(${INDICATEQT_LIBRARY_DIRS})
+      set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${INDICATEQT_LIBRARIES})
     else(INDICATEQT_FOUND)
       message(STATUS "Disabling Ayatana notification support")
     endif(INDICATEQT_FOUND)
-  endif(PKG_CONFIG_FOUND)
-else(WITH_LIBINDICATE)
-  message(STATUS "Not enabling Ayatana notification support")
-endif(WITH_LIBINDICATE)
+  else(WITH_LIBINDICATE AND NOT WITH_QT5)
+    message(STATUS "Not enabling Ayatana notification support")
+    # We don't want to link against it even if another package has found it
+    set(INDICATEQT_LIBRARIES "")
+  endif(WITH_LIBINDICATE AND NOT WITH_QT5)
+
+endif(BUILD_GUI)
+
+# Core-only deps
+if(BUILD_CORE)
+
+  # Setup encryption support
+  if(WITH_CRYPT AND NOT WITH_QT5)
+    find_package(QCA2)
+    if(QCA2_FOUND)
+      message(STATUS "Enabling encryption support")
+      add_definitions(-DHAVE_QCA2)
+      set(LINK_QCA2 QCA2)
+      set(HAVE_QCA2 true)
+      set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_QCA2)
+    else(QCA2_FOUND)
+      message(STATUS "Disabling encryption support")
+    endif(QCA2_FOUND)
+  else(WITH_CRYPT AND NOT WITH_QT5)
+    message(STATUS "Not enabling encryption support")
+  endif(WITH_CRYPT AND NOT WITH_QT5)
+
+  # Setup syslog support
+  if(WITH_SYSLOG)
+    check_include_file(syslog.h HAVE_SYSLOG_H)
+    if(HAVE_SYSLOG_H)
+      message(STATUS "Enabling syslog support")
+      set(HAVE_SYSLOG true)
+      add_definitions(-DHAVE_SYSLOG)
+    else(HAVE_SYSLOG_H)
+      message(STATUS "Disabling syslog support")
+    endif(HAVE_SYSLOG_H)
+  else(WITH_SYSLOG)
+    message(STATUS "Not enabling syslog support")
+  endif(WITH_SYSLOG)
+
+endif(BUILD_CORE)
+
+
+# Various settings
+##################
+
+# needed to compile with mingw without kde
+if(MINGW AND NOT HAVE_KDE)
+    add_definitions(-D_WIN32_WINNT=0x0500)
+    message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+# workaround for bug in mingw gcc 4.0
+    add_definitions(-U__STRICT_ANSI__)
+endif(MINGW AND NOT HAVE_KDE)
 
 # Now set up install locations; those are set by KDE if integration is enabled
 if(NOT HAVE_KDE)
@@ -289,21 +459,38 @@ endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
 
 if(WIN32)
   link_libraries(imm32 winmm dbghelp Secur32)  # missing by default :/
-
+  if(MSVC)
+    set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+    set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+    set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+    link_libraries(Version dwmapi shlwapi)
+  endif(MSVC)
   if(HAVE_SSL AND STATIC)
      find_package(OpenSSL REQUIRED)
-     link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
+     link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
   endif(HAVE_SSL AND STATIC)
 endif(WIN32)
 
-if(INDICATEQT_FOUND)
+if(HAVE_INDICATEQT)
   add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
-endif(INDICATEQT_FOUND)
+endif(HAVE_INDICATEQT)
+
+if(NOT WIN32)
+  check_function_exists(umask HAVE_UMASK)
+  if(HAVE_UMASK)
+    add_definitions(-DHAVE_UMASK)
+  endif(HAVE_UMASK)
+endif(NOT WIN32)
 
 # We need to create a version.gen
 # For this, we create our genversion binary and make sure it is run every time.
+
+setup_qt_variables()
+include_directories(${QUASSEL_QT_INCLUDES})
+
 add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
+target_link_libraries(genversion ${QUASSEL_QT_LIBRARIES})
+set_target_properties(genversion PROPERTIES COMPILE_FLAGS "${QUASSEL_QT_COMPILEFLAGS}")
 
 get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
 add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}