X-Git-Url: https://git.quassel-irc.org/?p=quassel.git;a=blobdiff_plain;f=CMakeLists.txt;h=0a3878ce9e44dd803e253f8fab8a21348a5bb69f;hp=69945fc930e7a443cbcca826616942bc772b2453;hb=8438c6f685ed43943d36996ada054941a30e3cb3;hpb=75b56fa155ec64fbe2a0a1a1aefe79f80646767c

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 69945fc9..0a3878ce 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,70 +1,131 @@
 # This is the cmake-based build system for Quassel IRC.
+#
 # You may pass various options to cmake:
 # -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-#                     : select binaries to build
-# -DWITH_OPENSSL=OFF  : Disable OpenSSL support
-# -DWITH_DBUS=OFF     : Disable D-Bus support
-# -DQT=/path/to/qt    : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON         : Enable static building of Quassel. Use with care.
-# -DSPUTDEV=ON        : Do not use.
-# -DDEPLOY=ON         : Mac OS X only. Use only fore redistribution Quassel Packages!!
+#                        : select binaries to build
+# -DWITH_OPENSSL=OFF     : Disable OpenSSL support
+# -DWITH_DBUS=OFF        : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF      : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF      : Disable Phonon support (audio notifications)
+# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
+# -DWITH_KDE=ON          : Enable KDE4 support
+# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
+#
+# -DEMBED_DATA=ON        : Embed all data files in icons the binary, rather than installing them separately
 #
-# NOTE: You need to remove CMakeCache.txt if you plan to change any of these values!
+# -DQT=/path/to/qt       : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON            : Enable static building of Quassel. Use with care.
+# -DDEPLOY=ON            : Mac OS X only. Use only for creating Quassel Packages!
+#
+# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
 
 project(QuasselIRC)
 
-# Target scopes don't work in older versions
-cmake_minimum_required(VERSION 2.4.7 FATAL_ERROR)
+# cmake 2.6.2 is required for KDE >=4.2 and should be widespread enough now
+cmake_minimum_required(VERSION 2.6.2 FATAL_ERROR)
 
 if(COMMAND cmake_policy)
    cmake_policy(SET CMP0003 NEW)
 endif(COMMAND cmake_policy)
 
-# Use our own (well, KDE's) version of some modules
-# In particular cmake's FindQt4 and FindOpenSSL are quite buggy
+# Use our own (well, and KDE's) version of some modules
+# In particular cmake's own FindQt4 and FindOpenSSL are quite buggy
 set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+include(QuasselMacros)
 
 # Various options and variables that can be set on the command line
 option(WANT_CORE     "Build the core (server) binary"           ON)
 option(WANT_QTCLIENT "Build the Qt4 GUI client binary"          ON)
-option(WANT_MONO     "Build the monolithic (all-in-one) binary" OFF)
+option(WANT_MONO     "Build the monolithic (all-in-one) binary" ON)
 
 option(WITH_OPENSSL  "Enable OpenSSL support if present on the system"	ON)
 option(WITH_DBUS     "Enable D-Bus support if present on the system"	ON)
+option(WITH_WEBKIT   "Enable WebKit support (for link previews)"	ON)
+option(WITH_PHONON   "Enable Phonon support (for audio notifications)"	ON)
+option(WITH_LIBINDICATE "Enable Ayatana notification support"           ON)
+option(WITH_KDE      "Enable KDE4 integration"				OFF)
+
+# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
+# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
+# run on a matching KDE version only.
+set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
 
 option(STATIC        "Enable static building (might not be portable)" OFF)
-option(DEPLOY        "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
-option(SPUTDEV       "Do not use!" OFF)
 
-set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt")
-set(LINGUAS "" CACHE STRING "Space-separated List of locales specifying languages that should be compiled")
+if(APPLE)
+  option(DEPLOY        "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+endif(APPLE)
+
+# Default to embedding data in the static case
+if(STATIC OR WIN32)
+  set(EMBED_DEFAULT ON)
+else(STATIC OR WIN32)
+  set(EMBED_DEFAULT ON) # should be OFF as soon as everything works
+endif(STATIC OR WIN32)
 
+option(EMBED_DATA    "Embed all data files in the binary (rather than installing them separately)"   ${EMBED_DEFAULT})
+
+set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
+
+# Some settings imply others
 if(STATIC)
-  set(CMAKE_BUILD_TYPE Release)
+  add_definitions(-DSTATIC)
+  set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
 endif(STATIC)
 
-# RPATH needs to be set correctly
-set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1) 
-set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
+if(WIN32)
+  # We don't support separately installed resources yet on Win32
+  set(EMBED_DATA ON)
+endif(WIN32)
+
+# For static builds, arbitrary extra libs might need to be linked
+# Define a comma-separated list here
+# e.g. for pgsql, we need -DLINK_EXTRA=pq;crypt
+set(LINK_EXTRA "" CACHE STRING "Semicolon-separated list of libraries to be linked")
+if(LINK_EXTRA)
+  string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
+  link_libraries(${LINK_EXTRA})
+endif(LINK_EXTRA)
+
+# Build Type
+# We need to make sure it's not empty
+# Supported: Release, RelWithDebugInfo, Debug, Debugfull
+
+# On WIN32, only Release seems to work correctly (?)
+if(WIN32)
+  set(DEFAULT_BUILD_TYPE "Release")
+else(WIN32)
+  set(DEFAULT_BUILD_TYPE "RelWithDebugInfo")
+endif(WIN32)
+
+set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type")
+if(NOT CMAKE_BUILD_TYPE)
+  set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
+endif(NOT CMAKE_BUILD_TYPE)
 
 # Enable various flags on gcc
 if(CMAKE_COMPILER_IS_GNUCXX)
-  include(CheckCXXCompilerFlag)
-  check_cxx_compiler_flag(-Wall HAVE_WALL)
-  if(HAVE_WALL)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
-  endif(HAVE_WALL)
-  check_cxx_compiler_flag(-Wextra HAVE_WEXTRA)
-  if(HAVE_WEXTRA)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wextra")
-  endif(HAVE_WEXTRA)
-  check_cxx_compiler_flag(-ansi HAVE_ANSI)
-  if(HAVE_ANSI)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi")
-  endif(HAVE_ANSI)
+  # Let's just hope that all gccs support these options and skip the tests...
+  # -fno-strict-aliasing is needed apparently for Qt < 4.6
+  set(CMAKE_CXX_FLAGS                  "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+  set(CMAKE_CXX_FLAGS_RELEASE          "-O2 ${CMAKE_CXX_FLAGS}")
+  set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-g -O2 ${CMAKE_CXX_FLAGS}")
+  set(CMAKE_CXX_FLAGS_DEBUG            "-g -ggdb -fno-reorder-blocks -fno-schedule-insns -fno-inline ${CMAKE_CXX_FLAGS}")
+  set(CMAKE_CXX_FLAGS_DEBUGFULL        "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
 endif(CMAKE_COMPILER_IS_GNUCXX)
 
-set(QT_MIN_VERSION "4.4.0")
+string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
+if(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+  add_definitions(-DNDEBUG -DQT_NO_DEBUG)
+else(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+  set(DEBUG 1)
+endif(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+
+if(WANT_MONO OR WANT_QTCLIENT)
+  set(QT_MIN_VERSION "4.5.0")
+else(WANT_MONO OR WANT_QTCLIENT)
+  set(QT_MIN_VERSION "4.4.0")
+endif(WANT_MONO OR WANT_QTCLIENT)
 
 if(APPLE AND DEPLOY)
   set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
@@ -73,45 +134,13 @@ if(APPLE AND DEPLOY)
   add_definitions(-DMAC_10_4_SDK)
 endif(APPLE AND DEPLOY)
 
-# Enable mostly b0rked stuff (new ChatView), do not enable this unless you know what you do...
-if(SPUTDEV)
-  add_definitions(-DSPUTDEV)
-endif(SPUTDEV)
-
-# Set up execinfo
-
-# The problem with this library is that it is built-in in the Linux glib, 
-# while on systems like FreeBSD, it is installed separately and thus needs to be linked to.
-# Therefore, we search for the header to see if the it's available in the first place.
-# If it is available, we try to locate the library to figure out whether it is built-in or not.
-
-find_path(EXECINFO_H_DIR "execinfo.h")
-
-if(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
-  # We found the header file's include dir.
-  # Let's add it so the compiler finds it as well.
-  include_directories(${EXECINFO_H_DIR})
-
-  # Now determine if it's built-in or not, by searching the library file.
-  find_library(EXECINFO_LIB_PATH "execinfo")
-
-  if(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
-    # Built-in, no further action is needed
-    message(STATUS "Found execinfo")
-  else(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
-    # It's an external library, link it.
-    link_libraries(${EXECINFO_LIB_PATH})
-    message(STATUS "Found execinfo: ${EXECINFO_LIB_PATH}")
-  endif(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
-
-  set(HAVE_EXECINFO true)
-
-endif(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
-
-if(HAVE_EXECINFO)
+# Execinfo is needed for generating backtraces
+find_package(ExecInfo)
+if(EXECINFO_FOUND)
   add_definitions(-DHAVE_EXECINFO)
-endif(HAVE_EXECINFO)
-
+  include_directories(${EXECINFO_INCLUDES})
+  link_libraries(${EXECINFO_LIBRARIES})
+endif(EXECINFO_FOUND)
 
 # Select a Qt installation here, if you don't want to use system Qt
 if(QT)
@@ -126,64 +155,137 @@ set(QT_DONT_USE_QTGUI 1)
 include(${QT_USE_FILE})
 include_directories(${QT_INCLUDES})
 
-# Set up OpenSSL
+# Setup OpenSSL
+# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
+# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
+# own SSL stuff in this case. Qt should care for adding what it needs itself.
 if(WITH_OPENSSL)
-  find_package(OpenSSL)
-endif(WITH_OPENSSL)
-if(OPENSSL_FOUND)
-  if(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
+  if(QT_QCONFIG MATCHES "openssl")
+    message(STATUS "Found OpenSSL support in Qt, enabling SSL")
     add_definitions(-DHAVE_SSL)
     set(HAVE_SSL true)
-  endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
-else(OPENSSL_FOUND)
-  add_definitions(-DQT_NO_OPENSSL)
-endif(OPENSSL_FOUND)
-
-if(WITH_DBUS AND QT_QTDBUS_FOUND)
-  add_definitions(-DHAVE_DBUS)
-  set(LINK_DBUS DBUS)
-  set(HAVE_DBUS true)
-endif(WITH_DBUS AND QT_QTDBUS_FOUND)
-
-# We need to create a version.gen
-# For this, we create our genversion binary and make sure it is run every time.
-add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
+  else(QT_QCONFIG MATCHES "openssl")
+    message(STATUS "No OpenSSL support found in Qt, disabling SSL")
+    add_definitions(-DQT_NO_OPENSSL)
+  endif(QT_QCONFIG MATCHES "openssl")
+else(WITH_OPENSSL)
+  message(STATUS "Not enabling OpenSSL support")
+endif(WITH_OPENSSL)
 
-add_custom_target(genversion_run ALL ${CMAKE_BINARY_DIR}/genversion
-                  ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/common/version.gen)
-add_dependencies(genversion_run genversion)
+# Setup D-Bus support
+if(WITH_DBUS)
+  if(QT_QTDBUS_FOUND)
+    message(STATUS "Found QtDBus, enabling D-Bus support")
+    add_definitions(-DHAVE_DBUS)
+    set(LINK_DBUS DBUS)
+    set(HAVE_DBUS true)
+  else(QT_QTDBUS_FOUND)
+    message(STATUS "QtDBus not found, disabling D-Bus support")
+  endif(QT_QTDBUS_FOUND)
+else(WITH_DBUS)
+  message(STATUS "Not enabling D-Bus support")
+endif(WITH_DBUS)
+
+# Setup QtWebKit support
+if(WITH_WEBKIT)
+  if(QT_QTWEBKIT_FOUND)
+    message(STATUS "Found QtWebKit, enabling WebKit support")
+    add_definitions(-DHAVE_WEBKIT)
+    set(LINK_WEBKIT WEBKIT XMLPATTERNS)
+    set(HAVE_WEBKIT true)
+  else(QT_QTWEBKIT_FOUND)
+    message(STATUS "QtWebKit not found, disabling WebKit support")
+  endif(QT_QTWEBKIT_FOUND)
+else(WITH_WEBKIT)
+  message(STATUS "Not enabling WebKit support")
+endif(WITH_WEBKIT)
+
+# Setup KDE4 support
+if(WITH_KDE)
+  find_package(KDE4)
+  if(KDE4_FOUND)
+    message(STATUS "Enabling KDE4 integration")
+    include_directories(${KDE4_INCLUDES})
+    add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+    set(HAVE_KDE 1)
+    set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
+    # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+    set(EMBED_DATA OFF)
+  else(KDE4_FOUND)
+    message(STATUS "KDE4 not found, disabling KDE integration")
+  endif(KDE4_FOUND)
+else(WITH_KDE)
+  message(STATUS "Not enabling KDE4 integration")
+endif(WITH_KDE)
+
+# needed to compile with mingw without kde
+if(MINGW AND NOT HAVE_KDE)
+    add_definitions(-D_WIN32_WINNT=0x0500)
+    message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+# workaround for bug in mingw gcc 4.0
+    add_definitions(-U__STRICT_ANSI__)
+endif(MINGW AND NOT HAVE_KDE)
+
+# Setup Phonon support - we only need this if we don't have or want KDE4
+if(NOT HAVE_KDE)
+  if(WITH_PHONON)
+    find_package(Phonon)
+    if(PHONON_FOUND)
+      message(STATUS "Enabling Phonon support")
+      add_definitions(-DHAVE_PHONON)
+      set(HAVE_PHONON true)
+    else(PHONON_FOUND)
+      message(STATUS "Phonon not found, disabling audio notifications")
+    endif(PHONON_FOUND)
+  else(WITH_PHONON)
+    message(STATUS "Not enabling Phonon support")
+  endif(WITH_PHONON)
+endif(NOT HAVE_KDE)
+
+# Setup libindicate-qt support
+if(WITH_LIBINDICATE)
+  find_package(PkgConfig QUIET)
+  if(PKG_CONFIG_FOUND)
+    pkg_check_modules(INDICATEQT indicate-qt>=0.2.1)
+    if(INDICATEQT_FOUND)
+      message(STATUS "Enabling Ayatana notification support")
+      add_definitions(-DHAVE_INDICATEQT)
+    else(INDICATEQT_FOUND)
+      message(STATUS "Disabling Ayatana notification support")
+    endif(INDICATEQT_FOUND)
+  endif(PKG_CONFIG_FOUND)
+else(WITH_LIBINDICATE)
+  message(STATUS "Not enabling Ayatana notification support")
+endif(WITH_LIBINDICATE)
+
+# Now set up install locations; those are set by KDE if integration is enabled
+if(NOT HAVE_KDE)
+  if(WIN32)
+    set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
+    set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
+    set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
+    set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
+  else(WIN32)
+    set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
+    set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
+    set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
+    set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
+  endif(WIN32)
+endif(NOT HAVE_KDE)
+
+if(EMBED_DATA)
+  message(STATUS "Embedding data files into the binary")
+else(EMBED_DATA)
+  message(STATUS "Installing data files separately")
+endif(EMBED_DATA)
 
-# Add needed subdirs
-add_subdirectory(src/common)
-include_directories(src/common)
-if(WANT_CORE OR WANT_MONO)
-  add_subdirectory(src/core)
-  include_directories(src/core)
-endif(WANT_CORE OR WANT_MONO)
-if(WANT_QTCLIENT OR WANT_MONO)
-  add_subdirectory(src/client)
-  add_subdirectory(src/uisupport)
-  add_subdirectory(src/qtui)
-  include_directories(src/client)
-  include_directories(src/uisupport)
-  include_directories(src/qtui)
-endif(WANT_QTCLIENT OR WANT_MONO)
-
-# Make sure version.gen exists before building mod_common
-add_dependencies(mod_common genversion_run)
-
-# Generate binary translation files
-include(QuasselGenerateTranslations)
-quassel_generate_i18n_resource(RC_I18N ${LINGUAS})
-
-# Add resources
-qt4_add_resources(RC_ICONS src/icons/icons.qrc)
-qt4_add_resources(RC_QUASSEL_ICONS src/icons/quassel-icons.qrc)
-qt4_add_resources(RC_SQL src/core/sql.qrc)
+# RPATH needs to be set correctly
+# Do this down here, since otherwise KDE wants to handle it itself, and fails
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
 
 # Set global buildflags
-# This is very much non-portable, so don't use -DSTATICGCC until you know what
+# This is very much non-portable, so don't use -DSTATIC until you know what
 # you do.
 if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
   set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
@@ -193,98 +295,42 @@ if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
   endif(HAVE_SSL)
 endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
 
-if(STATIC AND WIN32)
-  link_libraries(imm32 winmm)  # missing by default :/
-   if(HAVE_SSL)
-     link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
-   endif(HAVE_SSL)
-endif(STATIC AND WIN32)
-
 if(WIN32)
-  set(WIN32_RC src/icons/win32.rc)  # for app icons on windows
+  link_libraries(imm32 winmm dbghelp Secur32)  # missing by default :/
+  if(MSVC)
+    set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+    set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO}")
+    set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO}")
+    link_libraries(Version dwmapi shlwapi)
+  endif(MSVC)
+  if(HAVE_SSL AND STATIC)
+     find_package(OpenSSL REQUIRED)
+     link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+  endif(HAVE_SSL AND STATIC)
 endif(WIN32)
 
-# Here comes the dirty part. Our targets need different Qt4 modules, i.e. different libs
-# and defines. We can't simply include UseQt4 several times, since definitions add up.
-# We workaround this by using our own macro to figure out what to add.
-
-# This macro sets variables for additional Qt modules.
-macro(setup_qt4_variables)
-  set(QUASSEL_QT_LIBRARIES )
-  IF(WIN32)
-    set(MAIN MAIN)
-  ENDIF(WIN32)
-  foreach(qtmod CORE ${ARGV} ${MAIN})
-    set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_QT${qtmod}_LIBRARY} ${QT_${qtmod}_LIB_DEPENDENCIES})
-  endforeach(qtmod ${ARGV})
-  set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_LIBRARIES})
-endmacro(setup_qt4_variables)
-
-# Now we have everything, so just glue the right pieces together :)
-if(WANT_CORE)
-  setup_qt4_variables(NETWORK SCRIPT SQL)
-  add_executable(quasselcore ${CMAKE_SOURCE_DIR}/src/common/main.cpp
-                             ${RC_SQL} ${RC_I18N} ${WIN32_RC})
-  set_target_properties(quasselcore PROPERTIES 
-                                    COMPILE_FLAGS "-DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_CORE")
-  target_link_libraries(quasselcore mod_core mod_common 
-                                    ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_CORE)
-
-if(WANT_QTCLIENT)
-  setup_qt4_variables(${LINK_DBUS} GUI NETWORK)
-  add_executable(quasselclient WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
-                                     ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_I18N} ${WIN32_RC})
-  set_target_properties(quasselclient PROPERTIES
-                                      COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DBUILD_QTUI")
-  target_link_libraries(quasselclient mod_qtui mod_uisupport mod_client mod_common
-                                      ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_QTCLIENT)
-
-if(WANT_MONO)
-  setup_qt4_variables(${LINK_DBUS} GUI NETWORK SCRIPT SQL)
-  add_executable(quassel WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
-                               ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_SQL} ${RC_I18N} ${WIN32_RC})
-  set_target_properties(quassel PROPERTIES 
-                                COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_MONO")
-  target_link_libraries(quassel mod_qtui mod_uisupport mod_client mod_core mod_common 
-                                ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_MONO)
-
-# Build bundles for MacOSX
-if(APPLE)
-  add_custom_command(TARGET quasselclient POST_BUILD
-                     COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
-                             ${CMAKE_SOURCE_DIR} "Quassel Client" quasselclient)
-  add_custom_command(TARGET quassel POST_BUILD
-                     COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
-                             ${CMAKE_SOURCE_DIR} "Quassel" quassel)
-  if(DEPLOY)
-    add_custom_command(TARGET quasselclient POST_BUILD
-                       COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Client)
-    add_custom_command(TARGET quasselcore POST_BUILD
-                       COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Core)
-  endif(DEPLOY)
-endif(APPLE)
-
-# Install rules
-if(WANT_CORE)
-  install(TARGETS quasselcore
-          RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-endif(WANT_CORE)
+if(INDICATEQT_FOUND)
+  add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(INDICATEQT_FOUND)
 
-if(WANT_QTCLIENT)
-  install(TARGETS quasselclient
-          RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-
-  install(FILES quasselclient.desktop
-          DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_QTCLIENT)
+# We need to create a version.gen
+# For this, we create our genversion binary and make sure it is run every time.
+add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
+target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
 
-if(WANT_MONO)
-  install(TARGETS quassel
-          RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
+get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
+add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}
+                  ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/version.gen)
+add_dependencies(genversion_run genversion)
 
-  install(FILES quassel.desktop
-          DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_MONO)
+# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
+set(COMMON_DEPS ${RC_WIN32})
+set(CORE_DEPS )
+set(CLIENT_DEPS )
+
+# Add needed subdirs - the order is important, since src needs some vars set by other dirs
+add_subdirectory(data)
+add_subdirectory(icons)
+add_subdirectory(pics)
+add_subdirectory(po)
+add_subdirectory(src)