cmake_minimum_required(VERSION 3.5)
+# Tell CMake about or own modules
+set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
+
# Versions
set(QUASSEL_MAJOR 0)
set(QUASSEL_MINOR 13)
set(QUASSEL_PATCH 50)
set(QUASSEL_VERSION_STRING "0.14-pre")
-# Build type
-if (CMAKE_CONFIGURATION_TYPES)
- set(CMAKE_CONFIGURATION_TYPES Release RelWithDebInfo Debug Debugfull Profile)
- set(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING "These are the configuration types we support" FORCE)
-endif()
-
-if(NOT CMAKE_BUILD_TYPE)
- set(CMAKE_BUILD_TYPE RelWithDebInfo CACHE STRING "Choose the type of build, options are: Release RelWithDebInfo Debug Debugfull Profile None" FORCE)
-endif()
-
# Output CMake and Quassel versions as well as build type for debug reasons
message(STATUS "Building Quassel ${QUASSEL_VERSION_STRING}...")
message(STATUS "Using CMake ${CMAKE_VERSION}")
-message(STATUS "CMake build type: ${CMAKE_BUILD_TYPE}")
+
+# Set up build type rather early
+include(BuildType)
# Support ccache if found
# This should happen before calling project(), so compiler settings are validated.
# Set up project
project(Quassel CXX)
-# General conveniences
+# Let CMake handle file generation for Qt
set(CMAKE_AUTOMOC ON)
+set(CMAKE_AUTORCC ON)
+set(CMAKE_AUTOUIC ON)
+
+# Needed, otherwise some .moc files won't be found with older CMake versions
set(CMAKE_INCLUDE_CURRENT_DIR ON)
-# Include various CMake modules
+# Include various CMake modules...
include(CMakePushCheckState)
include(CheckFunctionExists)
include(CheckIncludeFileCXX)
include(CMakeDependentOption)
include(FeatureSummary)
-# Tell CMake about or own modules
-set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
+# ... and our own
include(QuasselCompileSettings)
include(QuasselMacros)
-
# Options and variables that can be set on the command line
#####################################################################
option(WITH_OXYGEN_ICONS "Support the Oxygen icon theme (KDE4)" OFF)
add_feature_info(WITH_OXYGEN_ICONS WITH_OXYGEN_ICONS "Support the Oxygen icon theme (KDE4)")
-if (WITH_BUNDLED_ICONS)
- add_definitions(-DWITH_BUNDLED_ICONS)
-endif()
-if (WITH_OXYGEN_ICONS)
- add_definitions(-DWITH_OXYGEN_ICONS)
-endif()
-
# For this, the feature info is added after we know if QtWebkit is installed
option(WITH_WEBKIT "WebKit support (for link previews) (legacy)" OFF)
# Setup CMake
#####################################################################
-# Setting COMPILE_DEFINITIONS_<CONFIG> is deprecated since CMake 3.0 in favor of generator expressions.
-# These have existed since CMake 2.8.10; until we depend on that, we have to explicitly enable the old policy.
-if (POLICY CMP0043)
- cmake_policy(SET CMP0043 OLD)
-endif()
-
-# Honor visibility settings for all target types
-if (POLICY CMP0063)
- cmake_policy(SET CMP0063 NEW)
-endif()
-
-# Don't automoc generated files
+# Let automoc/autouic process generated files
if (POLICY CMP0071)
- cmake_policy(SET CMP0071 OLD)
+ cmake_policy(SET CMP0071 NEW)
endif()
-
# Simplify later checks
#####################################################################
PURPOSE "Required for having translations"
)
-# Some Qt5 versions do not define a target for lconvert, so we need to find it ourselves
-if (Qt5LinguistTools_FOUND)
- if (NOT TARGET Qt5::lconvert AND TARGET Qt5::lrelease)
- get_target_property(_lrelease_location Qt5::lrelease LOCATION)
- get_filename_component(_lrelease_path ${_lrelease_location} PATH)
- find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
- elseif(TARGET Qt5::lconvert AND NOT Qt5_LCONVERT_EXECUTABLE)
- # Newer Qt5 versions define the target, but not the Qt5_LCONVERT_EXECUTABLE variable for some reason
- get_target_property(QT_LCONVERT_EXECUTABLE Qt5::lconvert LOCATION)
- endif()
-
- # Compatibility with the Qt4 variables
- set(QT_LRELEASE_EXECUTABLE ${Qt5_LRELEASE_EXECUTABLE})
- set(QT_LUPDATE_EXECUTABLE ${Qt5_LUPDATE_EXECUTABLE})
- if (Qt5_LCONVERT_EXECUTABLE)
- set(QT_LCONVERT_EXECUTABLE ${Qt5_LCONVERT_EXECUTABLE})
- endif()
-endif()
-
# Non-Qt-based packages
find_package(ZLIB REQUIRED)
endif()
# Check for SSL support in Qt
-# As there's no easy way to get Qt's configuration in particular for Qt5, let's just compile
-# a small test program checking the defines. This works for both Qt4 and Qt5.
cmake_push_check_state(RESET)
-set(CMAKE_REQUIRED_INCLUDES ${QT_INCLUDES} ${Qt5Core_INCLUDE_DIRS})
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Core_EXECUTABLE_COMPILE_FLAGS}")
-
-if (Qt5_POSITION_INDEPENDENT_CODE)
- set(CMAKE_REQUIRED_FLAGS "-fPIC -DQT_NO_VERSION_TAGGING")
-endif()
-
+set(CMAKE_REQUIRED_LIBRARIES Qt5::Core)
check_cxx_source_compiles("
#include \"qglobal.h\"
#if defined QT_NO_SSL
HAVE_SSL)
cmake_pop_check_state()
+if (HAVE_SSL)
+ add_definitions(-DHAVE_SSL)
+endif()
+add_feature_info("SSL support in Qt" HAVE_SSL "Use secure network connections")
+
# Additional compile settings
#####################################################################
-# This sets -fPIC and friends if required by the installed Qt5 library
-if (Qt5_POSITION_INDEPENDENT_CODE)
- set(CMAKE_POSITION_INDEPENDENT_CODE ON)
- set(CMAKE_REQUIRED_FLAGS "-DQT_NO_VERSION_TAGGING")
-endif()
-
# Needed to compile with mingw without kde
if (MINGW AND NOT WITH_KDE)
add_definitions(-D_WIN32_WINNT=0x0500)
add_definitions(-U__STRICT_ANSI__)
endif()
-# Sanitize compiler flags - old versions of KDE set -ansi, which breaks -std=c++11
-if (CMAKE_COMPILER_IS_GNUCXX)
- string(REPLACE "-ansi" "" CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS})
-endif()
-
# Setup LDAP Authentication support.
#####################################################################
if (WITH_LDAP)
find_package(Ldap)
if (LDAP_FOUND)
message(STATUS "Enabling LDAP authentication support")
- set(HAVE_LDAP true)
- add_definitions(-DHAVE_LDAP)
else()
message(STATUS "Disabling LDAP authentication support")
endif()
# Various config-dependent checks and settings
#####################################################################
-if (HAVE_SSL)
- add_definitions(-DHAVE_SSL)
-endif()
-add_feature_info("SSL support in Qt" HAVE_SSL "Use secure network connections")
-
# Check for syslog support
if (NOT WIN32)
check_include_file_cxx(syslog.h HAVE_SYSLOG)
add_feature_info("syslog.h" HAVE_SYSLOG "Provide support for logging to the syslog")
endif()
-add_feature_info("Qt Linguist Tools" QT_LCONVERT_EXECUTABLE "Translation support for Quassel")
+if (NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+endif()
if (EMBED_DATA)
message(STATUS "Embedding data files into the binary")
message(STATUS "Installing data files separately")
endif()
-if (NOT WIN32)
- check_function_exists(umask HAVE_UMASK)
- if(HAVE_UMASK)
- add_definitions(-DHAVE_UMASK)
- endif()
-endif()
-
-
# Windows-specific stuff
#####################################################################
set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
link_libraries(Version dwmapi shlwapi)
- set(QT_QTMAIN_LIBRARY Qt5::WinMain)
endif()
endif()
# Prepare the build
#####################################################################
-# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
-set(COMMON_DEPS ${RC_WIN32})
-set(CORE_DEPS )
-set(CLIENT_DEPS )
-
# Add needed subdirs - the order is important, since src needs some vars set by other dirs
add_subdirectory(data)
add_subdirectory(icons)
projects / quassel.git / blobdiff