# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
+cmake_minimum_required(VERSION 2.8.9)
project(QuasselIRC)
-include(CheckFunctionExists)
-include(CheckIncludeFile)
-include(CheckCXXCompilerFlag)
+# Versions
+set(QUASSEL_MAJOR 0)
+set(QUASSEL_MINOR 11)
+set(QUASSEL_PATCH 0)
+set(QUASSEL_VERSION_STRING "0.11-pre")
+
+# Tell CMake about or own modules
+set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
-# For building against Qt5, we check for an even newer cmake version below!
-cmake_minimum_required(VERSION 2.8.1 FATAL_ERROR)
+# General conveniences
+set(CMAKE_AUTOMOC ON)
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
-if(COMMAND cmake_policy)
- cmake_policy(SET CMP0003 NEW)
-endif(COMMAND cmake_policy)
+# Moar stuff
+include(CheckFunctionExists)
+include(CheckIncludeFile)
-# Use our own (well, and KDE's) version of some modules
-# In particular cmake's own FindQt4 and FindOpenSSL are quite buggy
-set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+include(QuasselCompileSettings)
include(QuasselMacros)
# Various options and variables that can be set on the command line
# Build Types
-if(CMAKE_CONFIGURATION_TYPES)
- set(CMAKE_CONFIGURATION_TYPES Release RelWithDebInfo Debug Debugfull Profile MinSizeRel)
- set(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING
- "Reset the configurations to what we need"
- FORCE)
-endif()
-
-if(NOT CMAKE_BUILD_TYPE)
- SET(CMAKE_BUILD_TYPE RelWithDebInfo CACHE STRING
- "Choose the type of build, options are: None Debug Release RelWithDebInfo Debug Debugfull Profile MinSizeRel."
- FORCE)
-endif()
-
-# Qt debug flags
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG QT_DEBUG)
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUGFULL QT_DEBUG)
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE QT_NO_DEBUG NDEBUG)
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO QT_NO_DEBUG NDEBUG)
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_PROFILE QT_NO_DEBUG NDEBUG)
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL QT_NO_DEBUG NDEBUG)
-
-if(NOT CMAKE_CONFIGURATION_TYPES AND NOT CMAKE_BUILD_TYPE)
- set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS QT_NO_DEBUG NDEBUG)
-endif()
-
-# Enable various flags on gcc
-if(CMAKE_COMPILER_IS_GNUCXX)
- # Let's just hope that all gccs support these options and skip the tests...
- # -fno-strict-aliasing is needed apparently for Qt < 4.6
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
-# set(CMAKE_CXX_FLAGS_RELEASE "-O2") # use CMake default
-# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-g -O2") # use CMake default
- set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -O2 -fno-reorder-blocks -fno-schedule-insns -fno-inline")
- set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -ggdb -fno-inline")
- set(CMAKE_CXX_FLAGS_PROFILE "-g3 -ggdb -fno-inline -ftest-coverage -fprofile-arcs")
-
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -W -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing -Wundef -Wcast-align -Wpointer-arith -Wformat-security -fno-check-new -fno-common")
-
- check_cxx_compiler_flag(-Woverloaded-virtual CXX_W_OVERLOADED_VIRTUAL)
- if(CXX_W_OVERLOADED_VIRTUAL)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Woverloaded-virtual")
- endif()
-endif(CMAKE_COMPILER_IS_GNUCXX)
-
-# ... and for Clang
-if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wnon-virtual-dtor -Wno-long-long -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wextra -Wpointer-arith -Wformat-security -Woverloaded-virtual -fno-common -Werror=return-type")
-# set(CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
-# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
- set(CMAKE_CXX_FLAGS_DEBUG "-g -O2 -fno-inline")
- set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -fno-inline")
- set(CMAKE_CXX_FLAGS_PROFILE "-g3 -fno-inline -ftest-coverage -fprofile-arcs")
-endif()
-
-# Mac build stuff
-if(APPLE AND DEPLOY)
- set(CMAKE_OSX_ARCHITECTURES "x86_64")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.6")
- set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.6.sdk/")
- add_definitions(-DMAC_10_6_SDK)
-endif(APPLE AND DEPLOY)
# Simplify checks
if(WANT_MONO OR WANT_QTCLIENT)
endif(QT_LRELEASE_EXECUTABLE)
+# zlib for compression, however we can always fall back to miniz
+find_package(ZLIB)
+if(ZLIB_FOUND)
+ message(STATUS "Using system zlib for compression")
+ add_definitions(-DHAVE_ZLIB)
+ include_directories(${ZLIB_INCLUDE_DIRS})
+ set(COMMON_LIBRARIES ${COMMON_LIBRARIES} ${ZLIB_LIBRARIES})
+else()
+ message(STATUS "zlib NOT found, using bundled miniz for compression")
+ if(${CMAKE_SIZEOF_VOID_P} EQUAL 4)
+ message(STATUS "WARNING: This may be slow on 32 bit systems!")
+ endif()
+endif()
+
+
# Execinfo is needed for generating backtraces
find_package(ExecInfo)
if(EXECINFO_FOUND)
# Setup KDE4 support
if(WITH_KDE AND NOT WITH_QT5)
+ # KDE has overzealous CFLAGS making miniz not compile, so save our old flags
+ set(_cflags ${CMAKE_C_FLAGS})
find_package(KDE4)
if(KDE4_FOUND)
message(STATUS "Enabling KDE4 integration")
set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} ${KDE4_KNOTIFYCONFIG_LIBRARY})
# We always use external icons for KDE4 support, since we use its iconloader rather than our own
set(EMBED_DATA OFF)
+ # Restore our old CFLAGS
+ set(CMAKE_C_FLAGS ${_cflags})
else(KDE4_FOUND)
message(STATUS "KDE4 not found, disabling KDE integration")
endif(KDE4_FOUND)
else(WITH_PHONON)
message(STATUS "Not enabling Phonon support")
endif(WITH_PHONON)
+
+ find_package(Libsnore)
+ if(LIBSNORE_FOUND)
+ add_definitions(-DHAVE_LIBSNORE)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${LIBSNORE_LIBRARIES})
+ set(HAVE_SNORENOTIFY true)
+ endif(LIBSNORE_FOUND)
endif(NOT HAVE_KDE)
# Setup libindicate-qt support
/System/Library/Frameworks/Foundation.framework
)
endif()
-
endif(BUILD_GUI)
# Core-only deps
endif(HAVE_UMASK)
endif(NOT WIN32)
-# We need to create a version.gen
-# For this, we create our genversion binary and make sure it is run every time.
+# Generate version information from Git
+include(GetGitRevisionDescription)
+get_git_head_revision(GIT_REFSPEC GIT_HEAD)
+git_describe(GIT_DESCRIBE --long)
-setup_qt_variables()
-include_directories(${QUASSEL_QT_INCLUDES})
-
-add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QUASSEL_QT_LIBRARIES})
-set_target_properties(genversion PROPERTIES COMPILE_FLAGS "${QUASSEL_QT_COMPILEFLAGS}")
+# Sanitize things if we're not in a Git repo
+if(NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+ set(GIT_HEAD "")
+ set(GIT_DESCRIBE "")
+endif()
-get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
-add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}
- ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/version.gen)
-add_dependencies(genversion_run genversion)
+configure_file(version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
set(COMMON_DEPS ${RC_WIN32})
projects / quassel.git / blobdiff