# This is the cmake-based build system for Quassel IRC.
+#
# You may pass various options to cmake:
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-# : select binaries to build
-# -DWITH_OPENSSL=OFF : Disable OpenSSL support
-# -DWITH_DBUS=OFF : Disable D-Bus support
-# -DWITH_WEBKIT=OFF : Disable WebKit support
-# -DOXYGEN_ICONS=(Builtin|External) : If "Builtin" (the default), compile our Oxygen Icon Theme subset into the binary
-# : If "External", we assume Oxygen is already installed on the system
-# -DQUASSEL_ICONS=(Builtin|External) : If "Builtin" (the default), put our own icons into the binary
-# : If "External", we install our icons into $PREFIX/share/apps/quassel (UNIX only)
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
+# : select binaries to build
+# -DWITH_OPENSSL=OFF : Disable OpenSSL support
+# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
+# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
+# -DWITH_KDE=ON : Enable KDE4 support
+# -DWITH_CRYPT=OFF : Disable encryption support
+# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
+# -DWITH_SYSLOG=OFF : Disable syslog support
+#
+# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
#
-# NOTE: You need to remove CMakeCache.txt if you plan to change any of these values!
+# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON : Enable static building of Quassel. Use with care.
+# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
+#
+# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
project(QuasselIRC)
-cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+
+# cmake 2.6.2 is required for KDE >=4.2 and should be widespread enough now
+cmake_minimum_required(VERSION 2.6.2 FATAL_ERROR)
if(COMMAND cmake_policy)
cmake_policy(SET CMP0003 NEW)
endif(COMMAND cmake_policy)
# Use our own (well, and KDE's) version of some modules
-# In particular cmake's FindQt4 and FindOpenSSL are quite buggy
+# In particular cmake's own FindQt4 and FindOpenSSL are quite buggy
set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+include(QuasselMacros)
# Various options and variables that can be set on the command line
option(WANT_CORE "Build the core (server) binary" ON)
option(WANT_QTCLIENT "Build the Qt4 GUI client binary" ON)
-option(WANT_MONO "Build the monolithic (all-in-one) binary" OFF)
+option(WANT_MONO "Build the monolithic (all-in-one) binary" ON)
option(WITH_OPENSSL "Enable OpenSSL support if present on the system" ON)
option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
-option(WITH_WEBKIT "Enable WebKit support if present on the system" ON)
+option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
+option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
+option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
+option(WITH_KDE "Enable KDE4 integration" OFF)
+option(WITH_CRYPT "Enable encryption support if present on system" ON)
+option(WITH_SYSLOG "Use syslog for storing log data" ON)
+
+# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
+# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
+# run on a matching KDE version only.
+set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
option(STATIC "Enable static building (might not be portable)" OFF)
-option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
-option(SPUTDEV "Do not use!" OFF)
-set(OXYGEN_ICONS "Builtin" CACHE STRING "Builtin: Compile Oxygen icons into the binary; External: Use system-installed Oxygen")
-set(QUASSEL_ICONS "Builtin" CACHE STRING "Builtin: Compile Quassel icons into the binary; External: Install them separately")
+if(APPLE)
+ option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+endif(APPLE)
+
+# Default to embedding data in the static case
+if(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON)
+else(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON) # should be OFF as soon as everything works
+endif(STATIC OR WIN32)
-set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt")
-set(LINGUAS "" CACHE STRING "Space-separated List of locales specifying languages that should be compiled")
+option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
+set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
+
+# Some settings imply others
if(STATIC)
- set(CMAKE_BUILD_TYPE Release)
- set(OXYGEN_ICONS "Builtin")
- set(QUASSEL_ICONS "Builtin")
+ add_definitions(-DSTATIC)
+ set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
endif(STATIC)
-# RPATH needs to be set correctly
-set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
-set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
+if(WIN32)
+ # We don't support separately installed resources yet on Win32
+ set(EMBED_DATA ON)
+endif(WIN32)
+
+# For static builds, arbitrary extra libs might need to be linked
+# Define a comma-separated list here
+# e.g. for pgsql, we need -DLINK_EXTRA=pq;crypt
+set(LINK_EXTRA "" CACHE STRING "Semicolon-separated list of libraries to be linked")
+if(LINK_EXTRA)
+ string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
+ link_libraries(${LINK_EXTRA})
+endif(LINK_EXTRA)
+
+# Build Type
+# We need to make sure it's not empty
+# Supported: Release, RelWithDebugInfo, Debug, Debugfull
+
+# On WIN32, only Release seems to work correctly (?)
+if(WIN32)
+ set(DEFAULT_BUILD_TYPE "Release")
+else(WIN32)
+ set(DEFAULT_BUILD_TYPE "RelWithDebugInfo")
+endif(WIN32)
-# Define install locations. Using variables will allow overriding this by the KDE macros later.
-set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin)
-set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps)
-set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons)
-set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications)
+set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type")
+if(NOT CMAKE_BUILD_TYPE)
+ set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
+endif(NOT CMAKE_BUILD_TYPE)
# Enable various flags on gcc
if(CMAKE_COMPILER_IS_GNUCXX)
# Let's just hope that all gccs support these options and skip the tests...
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor")
+ # -fno-strict-aliasing is needed apparently for Qt < 4.6
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+ set(CMAKE_CXX_FLAGS_RELEASE "-O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-g -O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -fno-reorder-blocks -fno-schedule-insns -fno-inline ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
endif(CMAKE_COMPILER_IS_GNUCXX)
-set(QT_MIN_VERSION "4.4.0")
+string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
+if(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ add_definitions(-DNDEBUG -DQT_NO_DEBUG)
+else(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ set(DEBUG 1)
+endif(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
if(APPLE AND DEPLOY)
set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
add_definitions(-DMAC_10_4_SDK)
endif(APPLE AND DEPLOY)
-include(QuasselMacros)
+# Simplify checks
+if(WANT_MONO OR WANT_QTCLIENT)
+ set(BUILD_GUI true)
+endif(WANT_MONO OR WANT_QTCLIENT)
+if(WANT_MONO OR WANT_CORE)
+ set(BUILD_CORE true)
+endif(WANT_MONO OR WANT_CORE)
+
+# Dependencies
+##############
+
+# GUI stuff needs some new features
+if(BUILD_GUI)
+ set(QT_MIN_VERSION "4.6.0")
+else(BUILD_GUI)
+ set(QT_MIN_VERSION "4.4.0")
+endif(BUILD_GUI)
# Execinfo is needed for generating backtraces
find_package(ExecInfo)
include(${QT_USE_FILE})
include_directories(${QT_INCLUDES})
+# PkgConfig isn't strictly required.
+# However, some optional deps might not be found if it's not present, so warn!
+find_package(PkgConfig)
+if(NOT PKG_CONFIG_FOUND)
+ message(STATUS "WARNING: PkgConfig not available! Some dependencies for optional features might not be found.")
+ message(STATUS " Affected features might include encryption support, DBus menus and Ayatana notifications.")
+endif(NOT PKG_CONFIG_FOUND)
+
# Setup OpenSSL
+# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
+# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
+# own SSL stuff in this case. Qt should care for adding what it needs itself.
if(WITH_OPENSSL)
- find_package(OpenSSL)
+ if(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "Found OpenSSL support in Qt, enabling SSL")
+ add_definitions(-DHAVE_SSL)
+ set(HAVE_SSL true)
+ else(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "No OpenSSL support found in Qt, disabling SSL")
+ add_definitions(-DQT_NO_OPENSSL)
+ endif(QT_QCONFIG MATCHES "openssl")
else(WITH_OPENSSL)
- message(STATUS "Disabling OpenSSL support")
+ message(STATUS "Not enabling OpenSSL support")
endif(WITH_OPENSSL)
-if(OPENSSL_FOUND)
- if(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "Found OpenSSL support in Qt")
- add_definitions(-DHAVE_SSL)
- set(HAVE_SSL true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_SSL)
- else(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "No OpenSSL support found in Qt, disabling")
- endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
-else(OPENSSL_FOUND)
- add_definitions(-DQT_NO_OPENSSL)
-endif(OPENSSL_FOUND)
-
-# Setup D-Bus support
-if(WITH_DBUS)
- if(QT_QTDBUS_FOUND)
- message(STATUS "Found QtDBus, enabling D-Bus support")
- add_definitions(-DHAVE_DBUS)
- set(LINK_DBUS DBUS)
- set(HAVE_DBUS true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_DBUS)
- else(QT_QTDBUS_FOUND)
- message(STATUS "QtDBus not found, disabling D-Bus support")
- endif(QT_QTDBUS_FOUND)
-else(WITH_DBUS)
- message(STATUS "Disabling D-Bus support")
-endif(WITH_DBUS)
-
-# Setup QtWebKit support
-if(WITH_WEBKIT)
- if(QT_QTWEBKIT_FOUND)
- message(STATUS "Found QtWebKit, enabling WebKit support")
- add_definitions(-DHAVE_WEBKIT)
- set(LINK_WEBKIT WEBKIT)
- set(HAVE_WEBKIT true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_WEBKIT)
- else(QT_QTWEBKIT_FOUND)
- message(STATUS "QtWebKit not found, disabling D-Bus support")
- endif(QT_QTWEBKIT_FOUND)
-else(WITH_WEBKIT)
- message(STATUS "Disabling WebKit support")
-endif(WITH_WEBKIT)
+# Check for GUI specific stuff
+if(BUILD_GUI)
+
+ # Setup D-Bus support
+ if(WITH_DBUS)
+ if(QT_QTDBUS_FOUND)
+ message(STATUS "Found QtDBus, enabling D-Bus support")
+ add_definitions(-DHAVE_DBUS)
+ set(CLIENT_QT4_VARS ${CLIENT_QT4_VARS} DBUS)
+ set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} -DQT_DBUS_LIB")
+ set(HAVE_DBUS true)
+
+ # check if we have dbusmenu as well
+ find_package(DBusMenuQt)
+ if(DBUSMENUQT_FOUND)
+ message(STATUS "Enabling support for exporting the tray menu via D-Bus")
+ add_definitions(-DHAVE_DBUSMENU)
+ include_directories(${DBUSMENUQT_INCLUDE_DIR})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${DBUSMENUQT_LIBRARIES})
+ set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} ${DBUSMENUQT_DEFINITIONS}")
+ else(DBUSMENUQT_FOUND)
+ message(STATUS "Disabling support for exporting the tray menu via D-Bus")
+ endif(DBUSMENUQT_FOUND)
+
+ else(QT_QTDBUS_FOUND)
+ message(STATUS "QtDBus not found, disabling D-Bus support")
+ endif(QT_QTDBUS_FOUND)
+ else(WITH_DBUS)
+ message(STATUS "Not enabling D-Bus support")
+ endif(WITH_DBUS)
+
+ # Setup QtWebKit support
+ if(WITH_WEBKIT)
+ if(QT_QTWEBKIT_FOUND)
+ message(STATUS "Found QtWebKit, enabling WebKit support")
+ add_definitions(-DHAVE_WEBKIT)
+ set(CLIENT_QT4_VARS ${CLIENT_QT4_VARS} WEBKIT XMLPATTERNS)
+ set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} -DQT_WEBKIT_LIB -DQT_XMLPATTERNS_LIB")
+ set(HAVE_WEBKIT true)
+ else(QT_QTWEBKIT_FOUND)
+ message(STATUS "QtWebKit not found, disabling WebKit support")
+ endif(QT_QTWEBKIT_FOUND)
+ else(WITH_WEBKIT)
+ message(STATUS "Not enabling WebKit support")
+ endif(WITH_WEBKIT)
+
+ # Setup KDE4 support
+ if(WITH_KDE)
+ find_package(KDE4)
+ if(KDE4_FOUND)
+ message(STATUS "Enabling KDE4 integration")
+ include_directories(${KDE4_INCLUDES})
+ add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+ set(HAVE_KDE 1)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
+ # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+ set(EMBED_DATA OFF)
+ else(KDE4_FOUND)
+ message(STATUS "KDE4 not found, disabling KDE integration")
+ endif(KDE4_FOUND)
+ else(WITH_KDE)
+ message(STATUS "Not enabling KDE4 integration")
+ endif(WITH_KDE)
+
+ # Setup Phonon support - we only need this if we don't have or want KDE4
+ if(NOT HAVE_KDE)
+ if(WITH_PHONON)
+ find_package(Phonon)
+ if(PHONON_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ include_directories(${PHONON_INCLUDES})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${PHONON_LIBS})
+ set(HAVE_PHONON true)
+ else(PHONON_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(PHONON_FOUND)
+ else(WITH_PHONON)
+ message(STATUS "Not enabling Phonon support")
+ endif(WITH_PHONON)
+ endif(NOT HAVE_KDE)
+
+ # Setup libindicate-qt support
+ if(WITH_LIBINDICATE)
+ pkg_check_modules(INDICATEQT QUIET indicate-qt>=0.2.1)
+ if(INDICATEQT_FOUND)
+ message(STATUS "Enabling Ayatana notification support")
+ set(HAVE_INDICATEQT true)
+ add_definitions(-DHAVE_INDICATEQT)
+ link_directories(${INDICATEQT_LIBRARY_DIRS})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${INDICATEQT_LIBRARIES})
+ else(INDICATEQT_FOUND)
+ message(STATUS "Disabling Ayatana notification support")
+ endif(INDICATEQT_FOUND)
+ else(WITH_LIBINDICATE)
+ message(STATUS "Not enabling Ayatana notification support")
+ # We don't want to link against it even if another package has found it
+ set(INDICATEQT_LIBRARIES "")
+ endif(WITH_LIBINDICATE)
+
+endif(BUILD_GUI)
+
+# Core-only deps
+if(BUILD_CORE)
+
+ # Setup encryption support
+ if(WITH_CRYPT)
+ find_package(QCA2)
+ if(QCA2_FOUND)
+ message(STATUS "Found QCA2, enabling encryption support")
+ add_definitions(-DHAVE_QCA2)
+ set(LINK_QCA2 QCA2)
+ set(HAVE_QCA2 true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_QCA2)
+ else(QCA2_FOUND)
+ message(STATUS "QCA2 not found, disabling encryption support")
+ endif(QCA2_FOUND)
+ else(WITH_CRYPT)
+ message(STATUS "Not enabling encryption support")
+ endif(WITH_CRYPT)
+
+ # Setup syslog support
+ if(WITH_SYSLOG)
+ check_include_file(syslog.h HAVE_SYSLOG_H)
+ if(HAVE_SYSLOG_H)
+ message(STATUS "Enabling syslog support")
+ set(HAVE_SYSLOG true)
+ add_definitions(-DHAVE_SYSLOG)
+ else(HAVE_SYSLOG_H)
+ message(STATUS "Disabling syslog support")
+ endif(HAVE_SYSLOG_H)
+ else(WITH_SYSLOG)
+ message(STATUS "Not enabling syslog support")
+ endif(WITH_SYSLOG)
+
+endif(BUILD_CORE)
+
+# needed to compile with mingw without kde
+if(MINGW AND NOT HAVE_KDE)
+ add_definitions(-D_WIN32_WINNT=0x0500)
+ message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+# workaround for bug in mingw gcc 4.0
+ add_definitions(-U__STRICT_ANSI__)
+endif(MINGW AND NOT HAVE_KDE)
+
+# Now set up install locations; those are set by KDE if integration is enabled
+if(NOT HAVE_KDE)
+ if(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
+ else(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
+ endif(WIN32)
+endif(NOT HAVE_KDE)
+
+if(EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else(EMBED_DATA)
+ message(STATUS "Installing data files separately")
+endif(EMBED_DATA)
+# RPATH needs to be set correctly
+# Do this down here, since otherwise KDE wants to handle it itself, and fails
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
# Set global buildflags
# This is very much non-portable, so don't use -DSTATIC until you know what
endif(HAVE_SSL)
endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
-if(STATIC AND WIN32)
- link_libraries(imm32 winmm) # missing by default :/
- if(HAVE_SSL)
- link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(HAVE_SSL)
-endif(STATIC AND WIN32)
-
if(WIN32)
- set(RC_WIN32 ../pics/win32.rc) # for app icons on windows
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+ if(MSVC)
+ set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+ link_libraries(Version dwmapi shlwapi)
+ endif(MSVC)
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
+ link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+ endif(HAVE_SSL AND STATIC)
endif(WIN32)
-# This is dirty, but I haven't found a cleaner way to ensure that the generated .qrc files
-# (which will be removed with make clean) are regenerated :/
-set_directory_properties(PROPERTIES
- ADDITIONAL_MAKE_CLEAN_FILES CMakeCache.txt)
+if(HAVE_INDICATEQT)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(HAVE_INDICATEQT)
+
+if(NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+ if(HAVE_UMASK)
+ add_definitions(-DHAVE_UMASK)
+ endif(HAVE_UMASK)
+endif(NOT WIN32)
# We need to create a version.gen
# For this, we create our genversion binary and make sure it is run every time.
${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/version.gen)
add_dependencies(genversion_run genversion)
-# Decide what to do with icons
-if(WANT_QTCLIENT OR WANT_MONO)
- if(QUASSEL_ICONS MATCHES "External")
- message(STATUS "Install Quassel icons to ${CMAKE_INSTALL_PREFIX}/share/apps/quassel")
- else(QUASSEL_ICONS MATCHES "External")
- set(QUASSEL_ICONS "Builtin")
- message(STATUS "Compile Quassel icons into the binary")
- endif(QUASSEL_ICONS MATCHES "External")
-
- if(OXYGEN_ICONS MATCHES "External")
- message(STATUS "Use system-installed Oxygen icon theme")
- else(OXYGEN_ICONS MATCHES "External")
- set(OXYGEN_ICONS "Builtin")
- message(STATUS "Compile Oxygen icon theme subset into the binary")
- endif(OXYGEN_ICONS MATCHES "External")
-endif(WANT_QTCLIENT OR WANT_MONO)
-
# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
-
set(COMMON_DEPS ${RC_WIN32})
set(CORE_DEPS )
set(CLIENT_DEPS )
-set(KDE_DEPS )
# Add needed subdirs - the order is important, since src needs some vars set by other dirs
add_subdirectory(data)
add_subdirectory(icons)
-#add_subdirectory(pics)
-add_subdirectory(i18n)
+add_subdirectory(pics)
+add_subdirectory(po)
add_subdirectory(src)
projects / quassel.git / blobdiff