#
# You may pass various options to cmake:
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-# : select binaries to build
-# -DWITH_OPENSSL=OFF : Disable OpenSSL support
-# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
-# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
-# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
-# -DWITH_KDE=ON : Enable KDE4 support
+# : select binaries to build
+# -DWITH_OPENSSL=OFF : Disable OpenSSL support
+# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
+# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
+# -DWITH_KDE=ON : Enable KDE4 support
+# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
#
-# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
+# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
#
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
+# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON : Enable static building of Quassel. Use with care.
+# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
#
# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
+option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
option(WITH_KDE "Enable KDE4 integration" OFF)
-# We use icon paths from KDE 4.3 trunk, which are partially invalid on older and possibly
+# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
# run on a matching KDE version only.
-option(WITH_OXYGEN "Install Oxygen icons. Heavily recommended unless you use KDE 4.3" ON)
+set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
option(STATIC "Enable static building (might not be portable)" OFF)
option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
-set(LINGUAS "" CACHE STRING "Comma-separated list of locales specifying languages that should be compiled")
# Some settings imply others
if(STATIC)
+ add_definitions(-DSTATIC)
set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
endif(STATIC)
set(EMBED_DATA ON)
endif(WIN32)
+# For static builds, arbitrary extra libs might need to be linked
+# Define a comma-separated list here
+# e.g. for pgsql, we need -DLINK_EXTRA=pq;crypt
+set(LINK_EXTRA "" CACHE STRING "Semicolon-separated list of libraries to be linked")
+if(LINK_EXTRA)
+ string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
+ link_libraries(${LINK_EXTRA})
+endif(LINK_EXTRA)
+
+# Build Type
+# We need to make sure it's not empty
+# Supported: Release, RelWithDebugInfo, Debug, Debugfull
+
+# On WIN32, only Release seems to work correctly (?)
+if(WIN32)
+ set(DEFAULT_BUILD_TYPE "Release")
+else(WIN32)
+ set(DEFAULT_BUILD_TYPE "RelWithDebugInfo")
+endif(WIN32)
+
+set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type")
+if(NOT CMAKE_BUILD_TYPE)
+ set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
+endif(NOT CMAKE_BUILD_TYPE)
+
# Enable various flags on gcc
if(CMAKE_COMPILER_IS_GNUCXX)
# Let's just hope that all gccs support these options and skip the tests...
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor")
+ # -fno-strict-aliasing is needed apparently for Qt < 4.6
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+ set(CMAKE_CXX_FLAGS_RELEASE "-O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-g -O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -fno-reorder-blocks -fno-schedule-insns -fno-inline ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
endif(CMAKE_COMPILER_IS_GNUCXX)
-set(QT_MIN_VERSION "4.4.0")
+string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
+if(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ add_definitions(-DNDEBUG -DQT_NO_DEBUG)
+else(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ set(DEBUG 1)
+endif(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+
+if(WANT_MONO OR WANT_QTCLIENT)
+ set(QT_MIN_VERSION "4.5.0")
+else(WANT_MONO OR WANT_QTCLIENT)
+ set(QT_MIN_VERSION "4.4.0")
+endif(WANT_MONO OR WANT_QTCLIENT)
if(APPLE AND DEPLOY)
set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
if(WITH_OPENSSL)
find_package(OpenSSL)
else(WITH_OPENSSL)
- message(STATUS "Disabling OpenSSL support")
+ message(STATUS "Not enabling OpenSSL support")
endif(WITH_OPENSSL)
if(OPENSSL_FOUND)
message(STATUS "QtDBus not found, disabling D-Bus support")
endif(QT_QTDBUS_FOUND)
else(WITH_DBUS)
- message(STATUS "Disabling D-Bus support")
+ message(STATUS "Not enabling D-Bus support")
endif(WITH_DBUS)
# Setup QtWebKit support
message(STATUS "QtWebKit not found, disabling WebKit support")
endif(QT_QTWEBKIT_FOUND)
else(WITH_WEBKIT)
- message(STATUS "Disabling WebKit support")
+ message(STATUS "Not enabling WebKit support")
endif(WITH_WEBKIT)
# Setup KDE4 support
add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
set(HAVE_KDE 1)
set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_KDE)
- set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} knotifyconfig)
+ set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
# We always use external icons for KDE4 support, since we use its iconloader rather than our own
set(EMBED_DATA OFF)
else(KDE4_FOUND)
message(STATUS "KDE4 not found, disabling KDE integration")
endif(KDE4_FOUND)
else(WITH_KDE)
- message(STATUS "Disabling KDE4 integration")
+ message(STATUS "Not enabling KDE4 integration")
endif(WITH_KDE)
# Setup Phonon support - we only need this if we don't have or want KDE4
message(STATUS "Phonon not found, disabling audio notifications")
endif(PHONON_FOUND)
else(WITH_PHONON)
- message(STATUS "Disabling Phonon support")
+ message(STATUS "Not enabling Phonon support")
endif(WITH_PHONON)
endif(NOT HAVE_KDE)
+# Setup libindicate-qt support
+if(WITH_LIBINDICATE)
+ find_package(PkgConfig QUIET)
+ if(PKG_CONFIG_FOUND)
+ pkg_check_modules(INDICATEQT indicate-qt>=0.2.1)
+ if(INDICATEQT_FOUND)
+ message(STATUS "Enabling Ayatana notification support")
+ add_definitions(-DHAVE_INDICATEQT)
+ else(INDICATEQT_FOUND)
+ message(STATUS "Disabling Ayatana notification support")
+ endif(INDICATEQT_FOUND)
+ endif(PKG_CONFIG_FOUND)
+else(WITH_LIBINDICATE)
+ message(STATUS "Not enabling Ayatana notification support")
+endif(WITH_LIBINDICATE)
+
# Now set up install locations; those are set by KDE if integration is enabled
if(NOT HAVE_KDE)
if(WIN32)
endif(WIN32)
endif(NOT HAVE_KDE)
+if(EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else(EMBED_DATA)
+ message(STATUS "Installing data files separately")
+endif(EMBED_DATA)
+
# RPATH needs to be set correctly
# Do this down here, since otherwise KDE wants to handle it itself, and fails
set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
if(WIN32)
- #if(STATIC)
- link_libraries(imm32 winmm dbghelp) # missing by default :/
- #endif(STATIC)
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+
if(HAVE_SSL)
link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
endif(HAVE_SSL)
endif(WIN32)
-if(WIN32)
- set(RC_WIN32 ../pics/win32.rc) # for app icons on windows
-endif(WIN32)
+if(INDICATEQT_FOUND)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(INDICATEQT_FOUND)
# We need to create a version.gen
# For this, we create our genversion binary and make sure it is run every time.
add_subdirectory(data)
add_subdirectory(icons)
add_subdirectory(pics)
-add_subdirectory(i18n)
+add_subdirectory(po)
add_subdirectory(src)
projects / quassel.git / blobdiff