# This is the cmake-based build system for Quassel IRC.
#
# You may pass various options to cmake:
+#
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
# : select binaries to build
# -DWITH_OPENSSL=OFF : Disable OpenSSL support
# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
# -DWITH_KDE=ON : Enable KDE4 support
+# -DWITH_CRYPT=OFF : Disable encryption support
# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
+# -DWITH_SYSLOG=OFF : Disable syslog support
#
# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
#
# -DSTATIC=ON : Enable static building of Quassel. Use with care.
# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
#
+# -DWITH_QT5=ON : Enable (very) experimental support for Qt5 (see doc/README.Qt5!)
+#
# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
+
project(QuasselIRC)
-cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCXXCompilerFlag)
+
+# For building against Qt5, we check for an even newer cmake version below!
+cmake_minimum_required(VERSION 2.8.1 FATAL_ERROR)
if(COMMAND cmake_policy)
cmake_policy(SET CMP0003 NEW)
option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
option(WITH_KDE "Enable KDE4 integration" OFF)
+option(WITH_CRYPT "Enable encryption support if present on system" ON)
+option(WITH_SYSLOG "Use syslog for storing log data" ON)
# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
# run on a matching KDE version only.
set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
+# Enable very experimental support for Qt5. Might break the compilation, or even more!
+option(WITH_QT5 "Enable (very) experimental support for Qt5" OFF)
+
option(STATIC "Enable static building (might not be portable)" OFF)
if(APPLE)
option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+ # Notification Center is only available in > 10.8, which is Darwin v12
+ if(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
+ option(WITH_NOTIFICATION_CENTER "Enable OS X Notification Center support" ON)
+ endif(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
endif(APPLE)
# Default to embedding data in the static case
option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
-set(LINGUAS "" CACHE STRING "Comma-separated list of locales specifying languages that should be compiled")
# Some settings imply others
if(STATIC)
link_libraries(${LINK_EXTRA})
endif(LINK_EXTRA)
-# Build Type
-# We need to make sure it's not empty
-# Supported: Release, RelWithDebugInfo, Debug, Debugfull
+# Build Types
-# On WIN32, only Release seems to work correctly (?)
-if(WIN32)
- set(DEFAULT_BUILD_TYPE "Release")
-else(WIN32)
- set(DEFAULT_BUILD_TYPE "RelWithDebugInfo")
-endif(WIN32)
+if(CMAKE_CONFIGURATION_TYPES)
+ set(CMAKE_CONFIGURATION_TYPES Release RelWithDebInfo Debug Debugfull Profile MinSizeRel)
+ set(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING
+ "Reset the configurations to what we need"
+ FORCE)
+endif()
-set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type")
if(NOT CMAKE_BUILD_TYPE)
- set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
-endif(NOT CMAKE_BUILD_TYPE)
+ SET(CMAKE_BUILD_TYPE RelWithDebInfo CACHE STRING
+ "Choose the type of build, options are: None Debug Release RelWithDebInfo Debug Debugfull Profile MinSizeRel."
+ FORCE)
+endif()
+
+# Qt debug flags
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUGFULL QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_PROFILE QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL QT_NO_DEBUG NDEBUG)
+
+if(NOT CMAKE_CONFIGURATION_TYPES AND NOT CMAKE_BUILD_TYPE)
+ set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS QT_NO_DEBUG NDEBUG)
+endif()
# Enable various flags on gcc
if(CMAKE_COMPILER_IS_GNUCXX)
# Let's just hope that all gccs support these options and skip the tests...
# -fno-strict-aliasing is needed apparently for Qt < 4.6
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
- set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-O2")
- set(CMAKE_CXX_FLAGS_DEBUG "-g -fno-reorder-blocks -fno-schedule-insns -fno-inline")
- set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+# set(CMAKE_CXX_FLAGS_RELEASE "-O2") # use CMake default
+# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-g -O2") # use CMake default
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -O2 -fno-reorder-blocks -fno-schedule-insns -fno-inline")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -ggdb -fno-inline")
+ set(CMAKE_CXX_FLAGS_PROFILE "-g3 -ggdb -fno-inline -ftest-coverage -fprofile-arcs")
+
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -W -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing -Wundef -Wcast-align -Wpointer-arith -Wformat-security -fno-check-new -fno-common")
+
+ check_cxx_compiler_flag(-Woverloaded-virtual CXX_W_OVERLOADED_VIRTUAL)
+ if(CXX_W_OVERLOADED_VIRTUAL)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Woverloaded-virtual")
+ endif()
endif(CMAKE_COMPILER_IS_GNUCXX)
+# ... and for Clang
+if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wnon-virtual-dtor -Wno-long-long -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wextra -Wpointer-arith -Wformat-security -Woverloaded-virtual -fno-common -Werror=return-type")
+# set(CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
+# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -O2 -fno-inline")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -fno-inline")
+ set(CMAKE_CXX_FLAGS_PROFILE "-g3 -fno-inline -ftest-coverage -fprofile-arcs")
+endif()
+
+# Mac build stuff
+if(APPLE AND DEPLOY)
+ set(CMAKE_OSX_ARCHITECTURES "x86_64")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.6")
+ set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.6.sdk/")
+ add_definitions(-DMAC_10_6_SDK)
+endif(APPLE AND DEPLOY)
+
+# Simplify checks
if(WANT_MONO OR WANT_QTCLIENT)
- set(QT_MIN_VERSION "4.4.1") # Client crashes often with 4.4.0
-else(WANT_MONO OR WANT_QTCLIENT)
- set(QT_MIN_VERSION "4.4.0")
+ set(BUILD_GUI true)
endif(WANT_MONO OR WANT_QTCLIENT)
+if(WANT_MONO OR WANT_CORE)
+ set(BUILD_CORE true)
+endif(WANT_MONO OR WANT_CORE)
+
+
+# Version checks
+################
+
+if(WITH_QT5)
+ set(QT_MIN_VERSION "5.0.0")
+ add_definitions(-DHAVE_QT5)
+
+ # Qt5 needs a new enough cmake...
+ cmake_minimum_required(VERSION 2.8.6 FATAL_ERROR)
+
+ # ... for automoc
+ set(CMAKE_AUTOMOC ON)
+else(WITH_QT5)
+
+ # GUI stuff needs some new features
+ if(BUILD_GUI)
+ set(QT_MIN_VERSION "4.6.0")
+ else(BUILD_GUI)
+ set(QT_MIN_VERSION "4.4.0")
+ endif(BUILD_GUI)
+endif(WITH_QT5)
+
+
+# Dependencies
+##############
+
+if(WITH_QT5)
+ find_package(Qt5Core ${QT_MIN_VERSION} REQUIRED)
+ # We need QtWidgets
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Widgets)
+
+ # Setup the i18n-related variables
+ find_package(Qt5LinguistTools)
+
+else(WITH_QT5)
+ # Select a Qt installation here, if you don't want to use system Qt
+ if(QT)
+ # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
+ set(ENV{PATH} ${QT}/bin:$ENV{PATH})
+ endif(QT)
+
+ # Now that we have the correct $PATH, lets find Qt!
+ find_package(Qt4 ${QT_MIN_VERSION} REQUIRED)
+endif(WITH_QT5)
+
+
+# Neither Qt4 nor Qt5 consider lconvert relevant, so they don't support finding it...
+# Rather than shipping hacked buildsys files, let's just infer the path from lrelease
+if(QT_LRELEASE_EXECUTABLE)
+ get_filename_component(_lrelease_path ${QT_LRELEASE_EXECUTABLE} PATH)
+ if(WITH_QT5)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ else(WITH_QT5)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt4 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ endif(WITH_QT5)
+endif(QT_LRELEASE_EXECUTABLE)
-if(APPLE AND DEPLOY)
- set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.4")
- set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.4u.sdk/")
- add_definitions(-DMAC_10_4_SDK)
-endif(APPLE AND DEPLOY)
# Execinfo is needed for generating backtraces
find_package(ExecInfo)
link_libraries(${EXECINFO_LIBRARIES})
endif(EXECINFO_FOUND)
-# Select a Qt installation here, if you don't want to use system Qt
-if(QT)
- # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
- set(ENV{PATH} ${QT}/bin:$ENV{PATH})
-endif(QT)
-# Now that we have the correct $PATH, lets find Qt!
-find_package(Qt4 REQUIRED)
+# PkgConfig isn't strictly required.
+# However, some optional deps might not be found if it's not present, so warn!
+find_package(PkgConfig)
+if(NOT PKG_CONFIG_FOUND)
+ message(STATUS "WARNING: PkgConfig not available! Some dependencies for optional features might not be found.")
+ message(STATUS " Affected features might include encryption support, DBus menus and Ayatana notifications.")
+endif(NOT PKG_CONFIG_FOUND)
-set(QT_DONT_USE_QTGUI 1)
-include(${QT_USE_FILE})
-include_directories(${QT_INCLUDES})
# Setup OpenSSL
+# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
+# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
+# own SSL stuff in this case. Qt should care for adding what it needs itself.
if(WITH_OPENSSL)
- find_package(OpenSSL)
+ if(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "Found OpenSSL support in Qt, enabling SSL")
+ add_definitions(-DHAVE_SSL)
+ set(HAVE_SSL true)
+ else(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "No OpenSSL support found in Qt, disabling SSL")
+ add_definitions(-DQT_NO_OPENSSL)
+ endif(QT_QCONFIG MATCHES "openssl")
else(WITH_OPENSSL)
message(STATUS "Not enabling OpenSSL support")
endif(WITH_OPENSSL)
-if(OPENSSL_FOUND)
- if(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "Found OpenSSL support in Qt")
- add_definitions(-DHAVE_SSL)
- set(HAVE_SSL true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_SSL)
- else(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "No OpenSSL support found in Qt, disabling")
- endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
-else(OPENSSL_FOUND)
- add_definitions(-DQT_NO_OPENSSL)
-endif(OPENSSL_FOUND)
-
-# Setup D-Bus support
-if(WITH_DBUS)
- if(QT_QTDBUS_FOUND)
- message(STATUS "Found QtDBus, enabling D-Bus support")
- add_definitions(-DHAVE_DBUS)
- set(LINK_DBUS DBUS)
- set(HAVE_DBUS true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_DBUS)
- else(QT_QTDBUS_FOUND)
- message(STATUS "QtDBus not found, disabling D-Bus support")
- endif(QT_QTDBUS_FOUND)
-else(WITH_DBUS)
- message(STATUS "Not enabling D-Bus support")
-endif(WITH_DBUS)
-
-# Setup QtWebKit support
-if(WITH_WEBKIT)
- if(QT_QTWEBKIT_FOUND)
- message(STATUS "Found QtWebKit, enabling WebKit support")
- add_definitions(-DHAVE_WEBKIT)
- set(LINK_WEBKIT WEBKIT)
- set(HAVE_WEBKIT true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_WEBKIT)
- else(QT_QTWEBKIT_FOUND)
- message(STATUS "QtWebKit not found, disabling WebKit support")
- endif(QT_QTWEBKIT_FOUND)
-else(WITH_WEBKIT)
- message(STATUS "Not enabling WebKit support")
-endif(WITH_WEBKIT)
-
-# Setup KDE4 support
-if(WITH_KDE)
- find_package(KDE4)
- if(KDE4_FOUND)
- message(STATUS "Enabling KDE4 integration")
- include_directories(${KDE4_INCLUDES})
- add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
- set(HAVE_KDE 1)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_KDE)
- set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} knotifyconfig)
- # We always use external icons for KDE4 support, since we use its iconloader rather than our own
- set(EMBED_DATA OFF)
- else(KDE4_FOUND)
- message(STATUS "KDE4 not found, disabling KDE integration")
- endif(KDE4_FOUND)
-else(WITH_KDE)
- message(STATUS "Not enabling KDE4 integration")
-endif(WITH_KDE)
-
-# Setup Phonon support - we only need this if we don't have or want KDE4
-if(NOT HAVE_KDE)
- if(WITH_PHONON)
- find_package(Phonon)
- if(PHONON_FOUND)
- message(STATUS "Enabling Phonon support")
- add_definitions(-DHAVE_PHONON)
- set(HAVE_PHONON true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_PHONON)
- else(PHONON_FOUND)
- message(STATUS "Phonon not found, disabling audio notifications")
- endif(PHONON_FOUND)
- else(WITH_PHONON)
- message(STATUS "Not enabling Phonon support")
- endif(WITH_PHONON)
-endif(NOT HAVE_KDE)
-# Setup libindicate-qt support
-if(WITH_LIBINDICATE)
- find_package(PkgConfig QUIET)
- if(PKG_CONFIG_FOUND)
- pkg_check_modules(INDICATEQT indicate-qt>=0.2.1)
+# Check for GUI specific stuff
+if(BUILD_GUI)
+
+ # Setup D-Bus support
+ if(WITH_DBUS)
+ if(WITH_QT5)
+ find_package(Qt5DBus ${QT_MIN_VERSION})
+ find_package(Qt5DBusTools)
+ endif(WITH_QT5)
+
+ if(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ message(STATUS "Found QtDBus, enabling D-Bus support")
+ add_definitions(-DHAVE_DBUS)
+ set(HAVE_DBUS true)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} DBus)
+
+ # check if we have dbusmenu as well
+ if(NOT WITH_QT5)
+ find_package(DBusMenuQt)
+ if(DBUSMENUQT_FOUND)
+ message(STATUS "Enabling support for exporting the tray menu via D-Bus")
+ add_definitions(-DHAVE_DBUSMENU)
+ include_directories(${DBUSMENUQT_INCLUDE_DIR})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${DBUSMENUQT_LIBRARIES})
+ set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} ${DBUSMENUQT_DEFINITIONS}")
+ else(DBUSMENUQT_FOUND)
+ message(STATUS "Disabling support for exporting the tray menu via D-Bus")
+ endif(DBUSMENUQT_FOUND)
+ endif(NOT WITH_QT5)
+
+ else(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ message(STATUS "QtDBus not found, disabling D-Bus support")
+ endif(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ else(WITH_DBUS)
+ message(STATUS "Not enabling D-Bus support")
+ endif(WITH_DBUS)
+
+ # Setup QtWebkit support
+ if(WITH_WEBKIT)
+ if(WITH_QT5)
+ find_package(Qt5Webkit ${QT_MIN_VERSION} QUIET)
+ endif(WITH_QT5)
+ if(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ message(STATUS "Found QtWebKit, enabling WebKit support")
+ add_definitions(-DHAVE_WEBKIT)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Webkit XmlPatterns)
+ set(HAVE_WEBKIT true)
+ else(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ message(STATUS "QtWebkit not found, disabling Webkit support")
+ endif(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ else(WITH_WEBKIT)
+ message(STATUS "Not enabling Webkit support")
+ endif(WITH_WEBKIT)
+
+ # Setup KDE4 support
+ if(WITH_KDE AND NOT WITH_QT5)
+ find_package(KDE4)
+ if(KDE4_FOUND)
+ message(STATUS "Enabling KDE4 integration")
+ include_directories(${KDE4_INCLUDES})
+ add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+ set(HAVE_KDE 1)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} ${KDE4_KNOTIFYCONFIG_LIBRARY})
+ # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+ set(EMBED_DATA OFF)
+ else(KDE4_FOUND)
+ message(STATUS "KDE4 not found, disabling KDE integration")
+ endif(KDE4_FOUND)
+ else(WITH_KDE AND NOT WITH_QT5)
+ message(STATUS "Not enabling KDE4 integration")
+ endif(WITH_KDE AND NOT WITH_QT5)
+
+ # Setup Phonon support - we only need this if we don't have or want KDE4
+ if(NOT HAVE_KDE)
+ if(WITH_PHONON)
+ if(WITH_QT5)
+ find_package(Qt5phonon)
+ if(Qt5phonon_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ set(HAVE_PHONON true)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} phonon)
+ else(Qt5phonon_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(Qt5phonon_FOUND)
+ else(WITH_QT5)
+ find_package(Phonon)
+ if(PHONON_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ include_directories(${PHONON_INCLUDES})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${PHONON_LIBS})
+ set(HAVE_PHONON true)
+ else(PHONON_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(PHONON_FOUND)
+ endif(WITH_QT5)
+ else(WITH_PHONON)
+ message(STATUS "Not enabling Phonon support")
+ endif(WITH_PHONON)
+ endif(NOT HAVE_KDE)
+
+ # Setup libindicate-qt support
+ if(WITH_LIBINDICATE AND NOT WITH_QT5)
+ pkg_check_modules(INDICATEQT QUIET indicate-qt>=0.2.1)
if(INDICATEQT_FOUND)
message(STATUS "Enabling Ayatana notification support")
+ set(HAVE_INDICATEQT true)
add_definitions(-DHAVE_INDICATEQT)
+ link_directories(${INDICATEQT_LIBRARY_DIRS})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${INDICATEQT_LIBRARIES})
else(INDICATEQT_FOUND)
message(STATUS "Disabling Ayatana notification support")
endif(INDICATEQT_FOUND)
- endif(PKG_CONFIG_FOUND)
-else(WITH_LIBINDICATE)
- message(STATUS "Not enabling Ayatana notification support")
-endif(WITH_LIBINDICATE)
+ else(WITH_LIBINDICATE AND NOT WITH_QT5)
+ message(STATUS "Not enabling Ayatana notification support")
+ # We don't want to link against it even if another package has found it
+ set(INDICATEQT_LIBRARIES "")
+ endif(WITH_LIBINDICATE AND NOT WITH_QT5)
+
+ # Setup OS X notification center support
+ if(WITH_NOTIFICATION_CENTER AND APPLE)
+ set(HAVE_NOTIFICATION_CENTER true)
+ add_definitions(-DHAVE_NOTIFICATION_CENTER)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES}
+ /System/Library/Frameworks/Foundation.framework
+ )
+ endif()
+
+endif(BUILD_GUI)
+
+# Core-only deps
+if(BUILD_CORE)
+
+ # Setup encryption support
+ if(WITH_CRYPT AND NOT WITH_QT5)
+ find_package(QCA2)
+ if(QCA2_FOUND)
+ message(STATUS "Enabling encryption support")
+ add_definitions(-DHAVE_QCA2)
+ set(LINK_QCA2 QCA2)
+ set(HAVE_QCA2 true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_QCA2)
+ else(QCA2_FOUND)
+ message(STATUS "Disabling encryption support")
+ endif(QCA2_FOUND)
+ else(WITH_CRYPT AND NOT WITH_QT5)
+ message(STATUS "Not enabling encryption support")
+ endif(WITH_CRYPT AND NOT WITH_QT5)
+
+ # Setup syslog support
+ if(WITH_SYSLOG)
+ check_include_file(syslog.h HAVE_SYSLOG_H)
+ if(HAVE_SYSLOG_H)
+ message(STATUS "Enabling syslog support")
+ set(HAVE_SYSLOG true)
+ add_definitions(-DHAVE_SYSLOG)
+ else(HAVE_SYSLOG_H)
+ message(STATUS "Disabling syslog support")
+ endif(HAVE_SYSLOG_H)
+ else(WITH_SYSLOG)
+ message(STATUS "Not enabling syslog support")
+ endif(WITH_SYSLOG)
+
+endif(BUILD_CORE)
+
+
+# Various settings
+##################
+
+# needed to compile with mingw without kde
+if(MINGW AND NOT HAVE_KDE)
+ add_definitions(-D_WIN32_WINNT=0x0500)
+ message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+# workaround for bug in mingw gcc 4.0
+ add_definitions(-U__STRICT_ANSI__)
+endif(MINGW AND NOT HAVE_KDE)
# Now set up install locations; those are set by KDE if integration is enabled
if(NOT HAVE_KDE)
if(WIN32)
link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
-
- if(HAVE_SSL)
- link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(HAVE_SSL)
+ if(MSVC)
+ set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+ link_libraries(Version dwmapi shlwapi)
+ endif(MSVC)
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
+ link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+ endif(HAVE_SSL AND STATIC)
endif(WIN32)
-if(INDICATEQT_FOUND)
- if(WANT_QTCLIENT)
- set(DESKTOP_FILE ${XDG_APPS_INSTALL_DIR}/quasselclient.desktop)
- endif(WANT_QTCLIENT)
- if(WANT_MONO)
- set(DESKTOP_FILE ${XDG_APPS_INSTALL_DIR}/quassel.desktop)
- endif(WANT_MONO)
- add_definitions(-DDESKTOP_FILE=${DESKTOP_FILE})
-endif(INDICATEQT_FOUND)
+if(HAVE_INDICATEQT)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(HAVE_INDICATEQT)
+
+if(NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+ if(HAVE_UMASK)
+ add_definitions(-DHAVE_UMASK)
+ endif(HAVE_UMASK)
+endif(NOT WIN32)
# We need to create a version.gen
# For this, we create our genversion binary and make sure it is run every time.
+
+setup_qt_variables()
+include_directories(${QUASSEL_QT_INCLUDES})
+
add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
+target_link_libraries(genversion ${QUASSEL_QT_LIBRARIES})
+set_target_properties(genversion PROPERTIES COMPILE_FLAGS "${QUASSEL_QT_COMPILEFLAGS}")
get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}
add_subdirectory(data)
add_subdirectory(icons)
add_subdirectory(pics)
-add_subdirectory(i18n)
+add_subdirectory(po)
add_subdirectory(src)
projects / quassel.git / blobdiff