#
# You may pass various options to cmake:
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-# : select binaries to build
-# -DWITH_OPENSSL=OFF : Disable OpenSSL support
-# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
-# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
-# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
-# -DWITH_KDE=ON : Enable KDE4 support
+# : select binaries to build
+# -DWITH_OPENSSL=OFF : Disable OpenSSL support
+# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
+# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
+# -DWITH_KDE=ON : Enable KDE4 support
+# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
#
-# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
+# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
#
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
+# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON : Enable static building of Quassel. Use with care.
+# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
#
# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
project(QuasselIRC)
-cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR)
+# cmake 2.6.2 is required for KDE >=4.2 and should be widespread enough now
+cmake_minimum_required(VERSION 2.6.2 FATAL_ERROR)
if(COMMAND cmake_policy)
cmake_policy(SET CMP0003 NEW)
option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
+option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
option(WITH_KDE "Enable KDE4 integration" OFF)
-# We use icon paths from KDE 4.3 trunk, which are partially invalid on older and possibly
+# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
# run on a matching KDE version only.
-option(WITH_OXYGEN "Install Oxygen icons. Heavily recommended unless you use KDE 4.3" ON)
+set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
option(STATIC "Enable static building (might not be portable)" OFF)
option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
-set(LINGUAS "" CACHE STRING "Comma-separated list of locales specifying languages that should be compiled")
# Some settings imply others
if(STATIC)
if(CMAKE_COMPILER_IS_GNUCXX)
# Let's just hope that all gccs support these options and skip the tests...
# -fno-strict-aliasing is needed apparently for Qt < 4.6
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
- set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-O2")
- set(CMAKE_CXX_FLAGS_DEBUG "-g -fno-reorder-blocks -fno-schedule-insns -fno-inline")
- set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+ set(CMAKE_CXX_FLAGS_RELEASE "-O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-g -O2 ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -fno-reorder-blocks -fno-schedule-insns -fno-inline ${CMAKE_CXX_FLAGS}")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
endif(CMAKE_COMPILER_IS_GNUCXX)
+string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type)
+if(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ add_definitions(-DNDEBUG -DQT_NO_DEBUG)
+else(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+ set(DEBUG 1)
+endif(upper_build_type STREQUAL "RELEASE" OR upper_build_type STREQUAL "RELWITHDEBUGINFO")
+
if(WANT_MONO OR WANT_QTCLIENT)
- set(QT_MIN_VERSION "4.4.1") # Client crashes often with 4.4.0
+ set(QT_MIN_VERSION "4.5.0")
else(WANT_MONO OR WANT_QTCLIENT)
set(QT_MIN_VERSION "4.4.0")
endif(WANT_MONO OR WANT_QTCLIENT)
include_directories(${QT_INCLUDES})
# Setup OpenSSL
+# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
+# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
+# own SSL stuff in this case. Qt should care for adding what it needs itself.
if(WITH_OPENSSL)
- find_package(OpenSSL)
-else(WITH_OPENSSL)
- message(STATUS "Disabling OpenSSL support")
-endif(WITH_OPENSSL)
-
-if(OPENSSL_FOUND)
- if(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "Found OpenSSL support in Qt")
+ if(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "Found OpenSSL support in Qt, enabling SSL")
add_definitions(-DHAVE_SSL)
set(HAVE_SSL true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_SSL)
- else(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
- message(STATUS "No OpenSSL support found in Qt, disabling")
- endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
-else(OPENSSL_FOUND)
- add_definitions(-DQT_NO_OPENSSL)
-endif(OPENSSL_FOUND)
+ else(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "No OpenSSL support found in Qt, disabling SSL")
+ add_definitions(-DQT_NO_OPENSSL)
+ endif(QT_QCONFIG MATCHES "openssl")
+else(WITH_OPENSSL)
+ message(STATUS "Not enabling OpenSSL support")
+endif(WITH_OPENSSL)
# Setup D-Bus support
if(WITH_DBUS)
add_definitions(-DHAVE_DBUS)
set(LINK_DBUS DBUS)
set(HAVE_DBUS true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_DBUS)
else(QT_QTDBUS_FOUND)
message(STATUS "QtDBus not found, disabling D-Bus support")
endif(QT_QTDBUS_FOUND)
else(WITH_DBUS)
- message(STATUS "Disabling D-Bus support")
+ message(STATUS "Not enabling D-Bus support")
endif(WITH_DBUS)
# Setup QtWebKit support
add_definitions(-DHAVE_WEBKIT)
set(LINK_WEBKIT WEBKIT)
set(HAVE_WEBKIT true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_WEBKIT)
else(QT_QTWEBKIT_FOUND)
message(STATUS "QtWebKit not found, disabling WebKit support")
endif(QT_QTWEBKIT_FOUND)
else(WITH_WEBKIT)
- message(STATUS "Disabling WebKit support")
+ message(STATUS "Not enabling WebKit support")
endif(WITH_WEBKIT)
# Setup KDE4 support
include_directories(${KDE4_INCLUDES})
add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
set(HAVE_KDE 1)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_KDE)
- set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} knotifyconfig)
+ set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} knotifyconfig)
# We always use external icons for KDE4 support, since we use its iconloader rather than our own
set(EMBED_DATA OFF)
else(KDE4_FOUND)
message(STATUS "KDE4 not found, disabling KDE integration")
endif(KDE4_FOUND)
else(WITH_KDE)
- message(STATUS "Disabling KDE4 integration")
+ message(STATUS "Not enabling KDE4 integration")
endif(WITH_KDE)
# Setup Phonon support - we only need this if we don't have or want KDE4
message(STATUS "Enabling Phonon support")
add_definitions(-DHAVE_PHONON)
set(HAVE_PHONON true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_PHONON)
else(PHONON_FOUND)
message(STATUS "Phonon not found, disabling audio notifications")
endif(PHONON_FOUND)
else(WITH_PHONON)
- message(STATUS "Disabling Phonon support")
+ message(STATUS "Not enabling Phonon support")
endif(WITH_PHONON)
endif(NOT HAVE_KDE)
+# Setup libindicate-qt support
+if(WITH_LIBINDICATE)
+ find_package(PkgConfig QUIET)
+ if(PKG_CONFIG_FOUND)
+ pkg_check_modules(INDICATEQT indicate-qt>=0.2.1)
+ if(INDICATEQT_FOUND)
+ message(STATUS "Enabling Ayatana notification support")
+ add_definitions(-DHAVE_INDICATEQT)
+ else(INDICATEQT_FOUND)
+ message(STATUS "Disabling Ayatana notification support")
+ endif(INDICATEQT_FOUND)
+ endif(PKG_CONFIG_FOUND)
+else(WITH_LIBINDICATE)
+ message(STATUS "Not enabling Ayatana notification support")
+endif(WITH_LIBINDICATE)
+
# Now set up install locations; those are set by KDE if integration is enabled
if(NOT HAVE_KDE)
if(WIN32)
endif(WIN32)
endif(NOT HAVE_KDE)
+if(EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else(EMBED_DATA)
+ message(STATUS "Installing data files separately")
+endif(EMBED_DATA)
+
# RPATH needs to be set correctly
# Do this down here, since otherwise KDE wants to handle it itself, and fails
set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
if(WIN32)
link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
- if(HAVE_SSL)
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(HAVE_SSL)
+ endif(HAVE_SSL AND STATIC)
endif(WIN32)
+if(INDICATEQT_FOUND)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(INDICATEQT_FOUND)
+
# We need to create a version.gen
# For this, we create our genversion binary and make sure it is run every time.
add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
add_subdirectory(data)
add_subdirectory(icons)
add_subdirectory(pics)
-add_subdirectory(i18n)
+add_subdirectory(po)
add_subdirectory(src)
projects / quassel.git / blobdiff