#include "ircuser.h"
#include "ircchannel.h"
+// IRCv3 capabilities
+#include "irccap.h"
+
// defined below!
struct NetworkInfo;
Q_PROPERTY(quint16 autoReconnectRetries READ autoReconnectRetries WRITE setAutoReconnectRetries)
Q_PROPERTY(bool unlimitedReconnectRetries READ unlimitedReconnectRetries WRITE setUnlimitedReconnectRetries)
Q_PROPERTY(bool rejoinChannels READ rejoinChannels WRITE setRejoinChannels)
+ // Custom rate limiting
+ Q_PROPERTY(bool useCustomMessageRate READ useCustomMessageRate WRITE setUseCustomMessageRate)
+ Q_PROPERTY(quint32 msgRateBurstSize READ messageRateBurstSize WRITE setMessageRateBurstSize)
+ Q_PROPERTY(quint32 msgRateMessageDelay READ messageRateDelay WRITE setMessageRateDelay)
+ Q_PROPERTY(bool unlimitedMessageRate READ unlimitedMessageRate WRITE setUnlimitedMessageRate)
public :
enum ConnectionState {
D_CHANMODE = 0x08
};
+ // Default port assignments according to what many IRC networks have settled on.
+ // Technically not a standard, but it's fairly widespread.
+ // See https://freenode.net/news/port-6697-irc-via-tlsssl
+ enum PortDefaults {
+ PORT_PLAINTEXT = 6667, /// Default port for unencrypted connections
+ PORT_SSL = 6697 /// Default port for encrypted connections
+ };
+
struct Server {
QString host;
uint port;
inline bool unlimitedReconnectRetries() const { return _unlimitedReconnectRetries; }
inline bool rejoinChannels() const { return _rejoinChannels; }
+ // Custom rate limiting
+
+ /**
+ * Gets whether or not custom rate limiting is used
+ *
+ * @return True if custom rate limiting is enabled, otherwise false.
+ */
+ inline bool useCustomMessageRate() const { return _useCustomMessageRate; }
+
+ /**
+ * Gets maximum number of messages to send without any delays
+ *
+ * @return
+ * @parblock
+ * Maximum number of messages to send without any delays. A value of 1 disables message
+ * bursting.
+ * @endparblock
+ */
+ inline quint32 messageRateBurstSize() const { return _messageRateBurstSize; }
+
+ /**
+ * Gets the delay between messages after the maximum number of undelayed messages have been sent
+ *
+ * @return
+ * @parblock
+ * Delay in milliseconds between messages after the maximum number of undelayed messages have
+ * been sent.
+ * @endparblock
+ */
+ inline quint32 messageRateDelay() const { return _messageRateDelay; }
+
+ /**
+ * Gets whether or not all rate limiting is disabled, e.g. for IRC bridges
+ *
+ * @return If true, disable rate limiting, otherwise apply configured limits.
+ */
+ inline bool unlimitedMessageRate() const { return _unlimitedMessageRate; }
+
NetworkInfo networkInfo() const;
void setNetworkInfo(const NetworkInfo &);
bool supports(const QString ¶m) const { return _supports.contains(param); }
QString support(const QString ¶m) const;
+ /**
+ * Checks if a given capability is advertised by the server.
+ *
+ * These results aren't valid if the network is disconnected or capability negotiation hasn't
+ * happened, and some servers might not correctly advertise capabilities. Don't treat this as
+ * a guarentee.
+ *
+ * @param[in] capability Name of capability
+ * @returns True if connected and advertised by the server, otherwise false
+ */
+ inline bool capAvailable(const QString &capability) const { return _caps.contains(capability.toLower()); }
+ // IRCv3 specs all use lowercase capability names
+
/**
* Checks if a given capability is acknowledged and active.
*
// QHash returns the default constructed value if not found, in this case, empty string
// See: https://doc.qt.io/qt-4.8/qhash.html#value
+ /**
+ * Check if the given authentication mechanism is likely to be supported.
+ *
+ * This depends on the server advertising SASL support and either declaring available mechanisms
+ * (SASL 3.2), or just indicating something is supported (SASL 3.1).
+ *
+ * @param[in] saslMechanism Desired SASL mechanism
+ * @return True if mechanism supported or unknown, otherwise false
+ */
+ bool saslMaybeSupports(const QString &saslMechanism) const;
+
IrcUser *newIrcUser(const QString &hostmask, const QVariantMap &initData = QVariantMap());
inline IrcUser *newIrcUser(const QByteArray &hostmask) { return newIrcUser(decodeServerString(hostmask)); }
IrcUser *ircUser(QString nickname) const;
void setUnlimitedReconnectRetries(bool);
void setRejoinChannels(bool);
+ // Custom rate limiting
+
+ /**
+ * Sets whether or not custom rate limiting is used.
+ *
+ * Setting limits too low may get you disconnected from the server!
+ *
+ * @param[in] useCustomRate If true, use custom rate limits, otherwise use Quassel defaults.
+ */
+ void setUseCustomMessageRate(bool useCustomRate);
+
+ /**
+ * Sets maximum number of messages to send without any delays
+ *
+ * @param[in] burstSize
+ * @parblock
+ * Maximum number of messages to send without any delays. A value of 1 disables message
+ * bursting. Cannot be less than 1 as sending 0 messages at a time accomplishes nothing.
+ * @endparblock
+ */
+ void setMessageRateBurstSize(quint32 burstSize);
+
+ /**
+ * Sets the delay between messages after the maximum number of undelayed messages have been sent
+ *
+ * @param[in] messageDelay
+ * @parblock
+ * Delay in milliseconds between messages after the maximum number of undelayed messages have
+ * been sent.
+ * @endparblock
+ */
+ void setMessageRateDelay(quint32 messageDelay);
+
+ /**
+ * Sets whether or not all rate limiting is disabled, e.g. for IRC bridges
+ *
+ * Don't use with most normal networks.
+ *
+ * @param[in] unlimitedRate If true, disable rate limiting, otherwise apply configured limits.
+ */
+ void setUnlimitedMessageRate(bool unlimitedRate);
+
void setCodecForServer(const QByteArray &codecName);
void setCodecForEncoding(const QByteArray &codecName);
void setCodecForDecoding(const QByteArray &codecName);
// void unlimitedReconnectRetriesSet(bool);
// void rejoinChannelsSet(bool);
+ // Custom rate limiting (can drive other slots)
+
+ /**
+ * Signals enabling or disabling custom rate limiting
+ *
+ * @see Network::useCustomMessageRate()
+ *
+ * @param[out] useCustomRate
+ */
+ void useCustomMessageRateSet(const bool useCustomRate);
+
+ /**
+ * Signals a change in maximum number of messages to send without any delays
+ *
+ * @see Network::messageRateBurstSize()
+ *
+ * @param[out] burstSize
+ */
+ void messageRateBurstSizeSet(const quint32 burstSize);
+
+ /**
+ * Signals a change in delay between messages after the max. undelayed messages have been sent
+ *
+ * @see Network::messageRateDelay()
+ *
+ * @param[out] messageDelay
+ */
+ void messageRateDelaySet(const quint32 messageDelay);
+
+ /**
+ * Signals enabling or disabling all rate limiting
+ *
+ * @see Network::unlimitedMessageRate()
+ *
+ * @param[out] unlimitedRate
+ */
+ void unlimitedMessageRateSet(const bool unlimitedRate);
+
// void codecForServerSet(const QByteArray &codecName);
// void codecForEncodingSet(const QByteArray &codecName);
// void codecForDecodingSet(const QByteArray &codecName);
bool _unlimitedReconnectRetries;
bool _rejoinChannels;
+ // Custom rate limiting
+ bool _useCustomMessageRate; /// If true, use custom rate limits, otherwise use defaults
+ quint32 _messageRateBurstSize; /// Maximum number of messages to send without any delays
+ quint32 _messageRateDelay; /// Delay in ms. for messages when max. burst messages sent
+ bool _unlimitedMessageRate; /// If true, disable rate limiting, otherwise apply limits
+
QTextCodec *_codecForServer;
QTextCodec *_codecForEncoding;
QTextCodec *_codecForDecoding;
bool unlimitedReconnectRetries;
bool rejoinChannels;
+ // Custom rate limiting
+ bool useCustomMessageRate; /// If true, use custom rate limits, otherwise use defaults
+ quint32 messageRateBurstSize; /// Maximum number of messages to send without any delays
+ quint32 messageRateDelay; /// Delay in ms. for messages when max. burst messages sent
+ bool unlimitedMessageRate; /// If true, disable rate limiting, otherwise apply limits
+
bool operator==(const NetworkInfo &other) const;
bool operator!=(const NetworkInfo &other) const;
};