#!/bin/bash
########################################################################
#### Script Name: inxi
-#### version: 1.4.15
-#### Date: September 16 2010
+#### version: 1.7.31
+#### Date: March 26 2012
+#### Patch Number: 00
########################################################################
#### SPECIAL THANKS
########################################################################
#### Gaim/Pidgin, Weechat, KVIrc and Kopete.
#### Original infobash author and copyright holder:
#### Copyright (C) 2005-2007 Michiel de Boer a.k.a. locsmif
-#### inxi version: Copyright (C) 2008-10 Scott Rogers & Harald Hope
+#### inxi version: Copyright (C) 2008-12 Scott Rogers & Harald Hope
#### Further fixes (listed as known): Horst Tritremmel <hjt at sidux.com>
#### Steven Barrett (aka: damentz) - usb audio patch; swap percent used patch
+#### Jarett.Stevens - dmidecde -M patch for older systems with the /sys
####
#### Current script home page: http://techpatterns.com/forums/about1131.html
#### Script svn: http://code.google.com/p/inxi
#### If you don't understand what Free Software is, please read (or reread)
#### this page: http://www.gnu.org/philosophy/free-sw.html
########################################################################
-#### Package names in (...) are the Debian Squeeze package name. Check your
-#### distro for proper package name by doing this: which <application>
-#### then find what package owns that application file.
+#### * Package names in (...) are the Debian Squeeze package name. Check your
+#### distro for proper package name by doing this: which <application>
+#### then find what package owns that application file. Or run --recommends
+#### which shows package names for Debian/Ubuntu, Arch, and Fedora/Redhat/Suse
+####
#### DEPENDENCIES
-#### bash >=3.0 (bash); df, readlink, stty, tr, uname, wc (coreutils);
-#### gawk (gawk); grep (grep); hostname (hostname); lspci (pciutils);
-#### free, ps, uptime (procps);
-#### Also the proc filesystem should be present and mounted
+#### * bash >=3.0 (bash); df, readlink, stty, tr, uname, wc (coreutils);
+#### gawk (gawk); grep (grep); lspci (pciutils);
+#### free, ps, uptime (procps); find (findutils)
+#### * Also the proc filesystem should be present and mounted
+#### * Some features, like -M and -d will not work, or will work incompletely,
+#### if /sys is missing
####
#### Apparently unpatched bash 3.0 has arrays broken; bug reports:
#### http://ftp.gnu.org/gnu/bash/bash-3.0-patches/bash30-008
#### http://lists.gnu.org/archive/html/bug-bash/2004-08/msg00144.html
#### Bash 3.1 for proper array use
####
-#### Arrays work in bash 2.05b, but "egrep -m" does not
+#### Arrays work in bash 2.05b, but "grep -Em" does not
####
#### RECOMMENDS (Needed to run certain features, listed by option)
#### -A - for output of usb audio information: lsusb (usbutils)
-#### -Ax - for audio module version: modinfo (module-init-tools)
+#### -Ax -Nx - for audio/network module version: modinfo (module-init-tools)
#### -Dx - for hdd temp output (root only default): hddtemp (hddtemp)
#### For user level hdd temp output: sudo (sudo)
#### Note: requires user action for this feature to run as user (edit /etc/sudoers file)
#### -G - full graphics output requires: glxinfo (mesa-utils); xdpyinfo (X11-utils);
#### xrandr (x11-xserver-utils)
-#### -i - IP information, local/wan - ifconfig (net-tools)
+#### -i - IP information, local/wan - ip (iproute) legacy, not used if ip present: ifconfig (net-tools)
#### -Ix - view current runlevel while not in X window system (or with -x): runlevel (sysvinit)
+#### -M - for older systems whose kernel does not have /sys data for machine, dmidecode (dmidecode)
#### -o - for unmounted file system information in unmounted drives (root only default): file (file)
#### Note: requires user action for this feature to run as user (edit /etc/sudoers file)
#### For user level unmounted file system type output: sudo (sudo)
#### -s For any sensors output, fan, temp, etc: sensors (lm-sensors)
#### Note: requires setup of lm-sensors (sensors-detect and adding modules/modprobe/reboot,
#### and ideally, pwmconfig) prior to full output being available.
+#### -S For desktop environment, user must be in X and have xprop installed (in X11-utils)
########################################################################
#### CONVENTIONS:
-#### Indentation: TABS
-#### Do not use `....` (back quotes), those are totally non-reabable, use $(....).
-#### Do not use one liner flow controls.
-#### The ONLY time you should use ';' (semi-colon) is in this single case: if [[ condition ]];then.
-#### Never use compound 'if': ie, if [[ condition ]] && statement.
-#### Note: [[ -n $something ]] - double brackets does not require quotes for variables: ie, "$something".
-#### Always use quotes, double or single, for all string values.
-####
-#### All new code/methods must be in a function.
-#### For all boolean tests, use 'true' / 'false'.
-#### !! Do NOT use 0 or 1 unless it's a function return.
-#### Avoid complicated tests in the if condition itself.
-#### To 'return' a value in a function, use 'echo <var>'.
-####
-#### For gawk: use always if ( num_of_cores > 1 ) { hanging { starter for all blocks
-#### This lets us use one method for all gawk structures, including BEGIN/END, if, for, etc
+#### * Character Encoding: UTF-8 - this file contains special characters that must be opened and saved as UTF8
+#### * Indentation: TABS
+#### * Do not use `....` (back quotes), those are totally non-reabable, use $(....).
+#### * Do not use one liner flow controls.
+#### The ONLY time you should use ';' (semi-colon) is in this single case: if [[ condition ]];then.
+#### Never use compound 'if': ie, if [[ condition ]] && statement.
+#### * Note: [[ -n $something ]] - double brackets does not require quotes for variables: ie, "$something".
+#### * Always use quotes, double or single, for all string values.
+#### * All new code/methods must be in a function.
+#### * For all boolean tests, use 'true' / 'false'.
+#### !! Do NOT use 0 or 1 unless it's a function return.
+#### * Avoid complicated tests in the if condition itself.
+#### * To 'return' a value in a function, use 'echo <var>'.
+#### * For gawk: use always if ( num_of_cores > 1 ) { hanging { starter for all blocks
+#### This lets us use one method for all gawk structures, including BEGIN/END, if, for, etc
####
#### VARIABLE/FUNCTION NAMING:
-#### All functions should follow standard naming--verb adjective noun.
-#### ie, get_cpu_data
-#### All variables MUST be initialized / declared explicitly.
-#### All variables should clearly explain what they are, except counters like i, j.
-#### Each word of variable must be separated by '_' (underscore) (camel form).
-#### Global variables are 'UPPER CASE', at top of script.
-#### ie, SOME_VARIABLE=''
-#### Local variables are 'lower case' and declared at the top of the function.
-#### ie, some_variable=''
-#### Locals that will be inherited by child functions have first char capitalized (so you know they are inherited).
-#### ie, Some_Variable
-####
-#### Booleans should start with b_ (local) or B_ (global) and state clearly what is being tested.
-#### Arrays should start with a_ (local) or A_ (global).
+#### * All functions should follow standard naming--verb adjective noun.
+#### ie, get_cpu_data
+#### * All variables MUST be initialized / declared explicitly, either top of file, for Globals, or using local
+#### * All variables should clearly explain what they are, except counters like i, j.
+#### * Each word of Bash variable must be separated by '_' (underscore) (camel form), like: cpu_data
+#### * Each word of Gawk variable must be like this (first word lower, following start with upper): cpuData
+#### * Global variables are 'UPPER CASE', at top of script.
+#### ie, SOME_VARIABLE=''
+#### * Local variables are 'lower case' and declared at the top of the function using local, always.
+#### ie: local some_variable=''
+#### * Locals that will be inherited by child functions have first char capitalized (so you know they are inherited).
+#### ie, Some_Variable
+#### * Booleans should start with b_ (local) or B_ (global) and state clearly what is being tested.
+#### * Arrays should start with a_ (local) or A_ (global).
####
#### SPECIAL NOTES:
-#### The color variable ${C2} must always be followed by a space unless you know what
-#### character is going to be next for certain. Otherwise irc color codes can be accidentally
-#### activated or altered.
-####
-#### For native script konversation support (check distro for correct konvi scripts path):
-#### ln -s <path to inxi> /usr/share/apps/konversation/scripts/inxi
-#### DCOP doesn't like \n, so avoid using it for most output unless required, as in error messages.
+#### * The color variable ${C2} must always be followed by a space unless you know what
+#### character is going to be next for certain. Otherwise irc color codes can be accidentally
+#### activated or altered.
+#### * For native script konversation support (check distro for correct konvi scripts path):
+#### ln -s <path to inxi> /usr/share/apps/konversation/scripts/inxi
+#### DCOP doesn't like \n, so avoid using it for most output unless required, as in error messages.
+#### * print_screen_output " " # requires space, not null, to avoid error in for example in irssi
+#### * For logging of array data, array must be placed into the temp_array, otherwise only the first key logs
+#### * In gawk search patterns, . is a wildcard EXCEPT in [0-9.] type containers, then it's a literal
+#### So outside of bracketed items, it must be escaped, \. but inside, no need. Outside of gawk it should
+#### be escaped in search patterns if you are using it as a literal.
####
#### As with all 'rules' there are acceptions, these are noted where used.
-####
###################################################################################
#### KDE Konversation information. Moving from dcop(qt3/KDE3) to dbus(qt4/KDE4)
###################################################################################
-#### dcop and dbus -- these talk back to Konversation from this script
-####
-#### Scripting info -- http://konversation.berlios.de/docs/scripting.html
-#### -- http://www.kde.org.uk/apps/konversation/
-####
-#### dbus info -- http://dbus.freedesktop.org/doc/dbus-tutorial.html
-#### view dbus info -- https://fedorahosted.org/d-feet/
-#### -- or run qdbus
-#### Konvi dbus/usage-- qdbus org.kde.konversation /irc say <server> <target-channel> <output>
-####
-#### Python usage -- http://wiki.python.org/moin/DbusExamples (just in case)
+#### * dcop and dbus -- these talk back to Konversation from this script
+#### * Scripting info -- http://konversation.berlios.de/docs/scripting.html
+#### -- http://www.kde.org.uk/apps/konversation/
+#### * dbus info -- http://dbus.freedesktop.org/doc/dbus-tutorial.html
+#### view dbus info -- https://fedorahosted.org/d-feet/
+#### -- or run qdbus
+#### * Konvi dbus/usage-- qdbus org.kde.konversation /irc say <server> <target-channel> <output>
+#### * Python usage -- http://wiki.python.org/moin/DbusExamples (just in case)
####
#### Because webpages come and go, the above information needs to be moved to inxi's wiki
-####
########################################################################
#### Valuable Resources
#### gawk arrays: http://www.math.utah.edu/docs/info/gawk_12.html
#### -! 13 - triggers an update from svn branch three - if present, of course
#### -! 14 - triggers an update from svn branch four - if present, of course
#### -! <http://......> - Triggers an update from whatever server you list.
-#### LOG FLAGS (logs to $HOME/.inxi/inxi.log with rotate 3 total)
+#### LOG FLAGS (logs to $HOME/.inxi/inxi.log with rotate 3 total)
#### -@ 8 - Basic data logging of generated data / array values
#### -@ 9 - Full logging of all data used, including cat of files and system data
#### -@ 10 - Basic data logging plus color code logging
### Variable initializations: null values
CMDL_MAX=''
COLOR_SCHEME=''
-COLOR_SCHEME_SET=''
# override in user config if desired, seems like less than .3 doesn't work as reliably
CPU_SLEEP='0.3'
DEV_DISK_LABEL=''
DEV_DISK_UUID=''
+FILTER_STRING='<filter>'
IRC_CLIENT=''
IRC_CLIENT_VERSION=''
+LINE_MAX=''
+LINE_MAX_CONSOLE='115'
+LINE_MAX_IRC='105'
PS_COUNT=5
PS_THROTTLED=''
REPO_DATA=''
REPO_FILE_ID=''
### primary data array holders ## usage: 'A_<var>'
+A_ALSA_DATA=''
A_AUDIO_DATA=''
A_CMDL=''
A_CPU_CORE_DATA=''
A_CPU_DATA=''
A_CPU_TYPE_PCNT_CCNT=''
A_DEBUG_BUFFER=''
+A_GCC_VERSIONS=''
A_GFX_CARD_DATA=''
A_GLX_DATA=''
+A_GRAPHIC_DRIVERS=''
A_HDD_DATA=''
A_INTERFACES_DATA=''
+A_MACHINE_DATA=''
A_NETWORK_DATA=''
+A_OPTICAL_DRIVE_DATA=''
A_PARTITION_DATA=''
A_PS_DATA=''
A_SENSORS_DATA=''
# flag to allow distro maintainers to turn off update features. If false, turns off
# -U and -! testing/advanced update options, as well as removing the -U help menu item
B_ALLOW_UPDATE='true'
+B_COLOR_SCHEME_SET='false'
+B_CONSOLE_IRC='false'
# triggers full display of cpu flags
B_CPU_FLAGS_FULL='false'
# test for dbus irc client
B_DEBUG_FLOOD='false'
# show extra output data
B_EXTRA_DATA='false'
+# triggered by -xx
+B_EXTRA_EXTRA_DATA='false'
# override certain errors due to currupted data
B_HANDLE_CORRUPT_DATA='false'
B_LABEL_SET='false'
B_LOG_COLORS='false'
B_LOG_FULL_DATA='false'
+B_OUTPUT_FILTER='false'
+B_OVERRIDE_FILTER='false'
# kde qdbus
B_QDBUS='false'
+B_PORTABLE='false'
B_ROOT='false'
+B_RUN_COLOR_SELECTOR='false'
# Running in a shell? Defaults to false, and is determined later.
B_RUNNING_IN_SHELL='false'
+if tty >/dev/null;then
+ B_RUNNING_IN_SHELL='true'
+fi
# this sets the debug buffer
B_SCRIPT_UP='false'
+B_SHOW_ADVANCED_NETWORK='false'
# Show sound card data
B_SHOW_AUDIO='false'
+B_SHOW_BASIC_CPU='false'
+B_SHOW_BASIC_DISK='false'
+B_SHOW_BASIC_OPTICAL='false'
B_SHOW_CPU='false'
+B_SHOW_DISK_TOTAL='false'
B_SHOW_DISK='false'
# Show full hard disk output
B_SHOW_FULL_HDD='false'
+B_SHOW_FULL_OPTICAL='false'
B_SHOW_GRAPHICS='false'
-# Set this to 'false' to avoid printing the hostname
+# Set this to 'false' to avoid printing the hostname, this isn't used except for
+# user configuration options via config files
B_SHOW_HOST='true'
B_SHOW_INFO='false'
B_SHOW_IP='false'
B_SHOW_LABELS='false'
+B_SHOW_MACHINE='false'
B_SHOW_NETWORK='false'
# either -v > 3 or -P will show partitions
B_SHOW_PARTITIONS='false'
B_SHOW_PS_CPU_DATA='false'
B_SHOW_PS_MEM_DATA='false'
B_SHOW_REPOS='false'
+B_RUNNING_IN_X='false'
B_SHOW_SENSORS='false'
# triggers only short inxi output
B_SHOW_SHORT_OUTPUT='false'
B_SHOW_SYSTEM='false'
B_SHOW_UNMOUNTED_PARTITIONS='false'
B_SHOW_UUIDS='false'
+B_SHOW_X_DATA='false'
# triggers various debugging and new option testing
B_TESTING_1='false'
B_TESTING_2='false'
+B_UPLOAD_DEBUG_DATA='false'
+B_USB_NETWORKING='false'
# set to true here for debug logging from script start
B_USE_LOGGING='false'
B_UUID_SET='false'
-# Test for X running
-B_X_RUNNING='false'
+B_XORG_LOG='false'
### Directory/file exist flags; test as [[ $(boolean) ]] not [[ $boolean ]]
B_ASOUND_DEVICE_FILE='false'
### File's used when present
FILE_ASOUND_DEVICE='/proc/asound/cards'
+FILE_ASOUND_MODULES='/proc/asound/modules' # not used but maybe for -A?
FILE_ASOUND_VERSION='/proc/asound/version'
FILE_CPUINFO='/proc/cpuinfo'
FILE_LSB_RELEASE='/etc/lsb-release'
FILE_MOUNTS='/proc/mounts'
FILE_PARTITIONS='/proc/partitions'
FILE_SCSI='/proc/scsi/scsi'
+FILE_XORG_LOG='/var/log/Xorg.0.log' # if not found, search and replace with actual location
## app tested for and present, to avoid repeat tests
B_FILE_TESTED='false'
## note: the debugger rerouting to /dev/null has been moved to the end of the get_parameters function
## so -@[number] debug levels can be set if there is a failure, otherwise you can't even see the errors
-# Defaults to 2, make this 1 for normal, 0 for no colorcodes at all. Set to any other valid scheme you like.
+# Defaults to 2, make this 1 for normal, 0 for no colorcodes at all. Use following variables in config
+# files to change defaults for each type, or global
# Same as runtime parameter.
-DEFAULT_SCHEME=2
+DEFAULT_COLOR_SCHEME=2
+# Always leave these blank, these are only going to be set in inxi.conf files, that makes testing
+# for user changes easier after sourcing the files
+GLOBAL_COLOR_SCHEME=''
+IRC_COLOR_SCHEME=''
+IRC_CONS_COLOR_SCHEME=''
+IRC_X_TERM_COLOR_SCHEME=''
+CONSOLE_COLOR_SCHEME=''
+VIRT_TERM_COLOR_SCHEME=''
# Default indentation level
INDENT=10
# NO_CPU_COUNT=0 # Wether or not the string "dual" or similar is found in cpuinfo output. If so, avoid dups.
# This is a variable that controls how many parameters inxi will parse in a /proc/<pid>/cmdline file before stopping.
PARAMETER_LIMIT=30
-SCHEME=0 # set default scheme
+SCHEME=0 # set default scheme - do not change this, it's set dynamically
# this is set in user prefs file, to override dynamic temp1/temp2 determination of sensors output in case
# cpu runs colder than mobo
SENSORS_CPU_NO=''
# Verbosity level defaults to 0, this can also be set with -v0, -v2, -v3, etc as a parameter.
VERBOSITY_LEVEL=0
# Supported number of verbosity levels, including 0
-VERBOSITY_LEVELS=5
+VERBOSITY_LEVELS=7
# Clear nullglob, because it creates unpredictable situations with IFS=$'\n' ARR=($VAR) IFS="$ORIGINAL_IFS"
# type constructs. Stuff like [rev a1] is now seen as a glob expansion pattern, and fails, and
ORIGINAL_IFS="$IFS"
# These two determine separators in single line output, to force irc clients not to break off sections
-SEP1='-'
-SEP2='~'
+SEP1='~'
+SEP2=' '
+# these will assign a separator to non irc states. Important! Using ':' can trigger stupid emoticon
+# behaviors in output on IRC, so do not use those.
+SEP3_IRC=''
+SEP3_CONSOLE=':'
+SEP3='' # do not set, will be set dynamically
### Script names/paths - must be non root writable
SCRIPT_DATA_DIR="$HOME/.inxi"
+ALTERNATE_FTP='' # for data uploads
LOG_FILE="$SCRIPT_DATA_DIR/inxi.log"
LOG_FILE_1="$SCRIPT_DATA_DIR/inxi.1.log"
LOG_FILE_2="$SCRIPT_DATA_DIR/inxi.2.log"
SCRIPT_NAME="inxi"
+SCRIPT_PATCH_NUMBER=''
SCRIPT_PATH="" #filled-in in Main
SCRIPT_VERSION_NUMBER="" #filled-in in Main
SCRIPT_DOWNLOAD='http://inxi.googlecode.com/svn/trunk/'
### Output Colors
# A more elegant way to have a scheme that doesn't print color codes (neither ANSI nor mIRC) at all. See below.
unset EMPTY
-# DGREY BLACK RED DRED GREEN DGREEN YELLOW DYELLOW
+# DGREY BLACK RED DRED GREEN DGREEN YELLOW DYELLOW
ANSI_COLORS="\e[1;30m \e[0;30m \e[1;31m \e[0;31m \e[1;32m \e[0;32m \e[1;33m \e[0;33m"
-IRC_COLORS=" \x0314 \x0301 \x0304 \x0305 \x0309 \x0303 \x0308 \x0307"
-# BLUE DBLUE MAGENTA DMAGENTA CYAN DCYAN WHITE GREY NORMAL
+IRC_COLORS=" \x0314 \x0301 \x0304 \x0305 \x0309 \x0303 \x0308 \x0307"
+# BLUE DBLUE MAGENTA DMAGENTA CYAN DCYAN WHITE GREY NORMAL
ANSI_COLORS="$ANSI_COLORS \e[1;34m \e[0;34m \e[1;35m \e[0;35m \e[1;36m \e[0;36m \e[1;37m \e[0;37m \e[0;37m"
-IRC_COLORS=" $IRC_COLORS \x0312 \x0302 \x0313 \x0306 \x0311 \x0310 \x0300 \x0315 \x03"
+IRC_COLORS=" $IRC_COLORS \x0312 \x0302 \x0313 \x0306 \x0311 \x0310 \x0300 \x0315 \x03"
#ANSI_COLORS=($ANSI_COLORS); IRC_COLORS=($IRC_COLORS)
A_COLORS_AVAILABLE=( DGREY BLACK RED DRED GREEN DGREEN YELLOW DYELLOW BLUE DBLUE MAGENTA DMAGENTA CYAN DCYAN WHITE GREY NORMAL )
+
# See above for notes on EMPTY
-A_COLOR_SCHEMES=( EMPTY,EMPTY,EMPTY NORMAL,NORMAL,NORMAL BLUE,NORMAL,NORMAL GREEN,YELLOW,NORMAL DYELLOW,NORMAL,NORMAL CYAN,BLUE,NORMAL RED,NORMAL,NORMAL GREEN,NORMAL,NORMAL YELLOW,NORMAL,NORMAL GREEN,DGREEN,NORMAL BLUE,RED,NORMAL BLUE,NORMAL,RED YELLOW,WHITE,GREEN BLUE,NORMAL,GREEN DCYAN,NORMAL,DMAGENTA )
+## note: group 1: 0, 1 are null/normal
+## Following: group 2: generic, light/dark or dark/light; group 3: dark on light; group 4 light on dark;
+# this is the count of the first two groups, starting at zero
+SAFE_COLOR_COUNT=12
+A_COLOR_SCHEMES=(
+EMPTY,EMPTY,EMPTY
+NORMAL,NORMAL,NORMAL
+
+BLUE,NORMAL,NORMAL
+BLUE,RED,NORMAL
+CYAN,BLUE,NORMAL
+DCYAN,NORMAL,NORMAL
+DCYAN,BLUE,NORMAL
+DGREEN,NORMAL,NORMAL
+DYELLOW,NORMAL,NORMAL
+GREEN,DGREEN,NORMAL
+GREEN,NORMAL,NORMAL
+MAGENTA,NORMAL,NORMAL
+RED,NORMAL,NORMAL
+
+BLACK,DGREY,NORMAL
+DBLUE,DGREY,NORMAL
+DBLUE,DMAGENTA,NORMAL
+DBLUE,DRED,NORMAL
+DBLUE,BLACK,NORMAL
+DGREEN,DYELLOW,NORMAL
+DYELLOW,BLACK,NORMAL
+DMAGENTA,BLACK,NORMAL
+DCYAN,DBLUE,NORMAL
+
+WHITE,GREY,NORMAL
+GREY,WHITE,NORMAL
+CYAN,GREY,NORMAL
+GREEN,WHITE,NORMAL
+GREEN,YELLOW,NORMAL
+YELLOW,WHITE,NORMAL
+MAGENTA,CYAN,NORMAL
+MAGENTA,YELLOW,NORMAL
+RED,CYAN,NORMAL
+RED,WHITE,NORMAL
+BLUE,WHITE,NORMAL
+)
+
## Actual color variables
C1=''
C2=''
### Distro Data
# In cases of derived distros where the version file of the base distro can also be found under /etc,
# the derived distro's version file should go first. (Such as with Sabayon / Gentoo)
-DISTROS_DERIVED="antix-version kanotix-version knoppix-version mandrake-release pardus-release sabayon-release sidux-version turbolinux-release zenwalk-version"
+DISTROS_DERIVED="antix-version aptosid-version kanotix-version knoppix-version mandrake-release pardus-release sabayon-release siduction-version sidux-version turbolinux-release zenwalk-version"
# debian_version excluded from DISTROS_PRIMARY so Debian can fall through to /etc/issue detection. Same goes for Ubuntu.
DISTROS_EXCLUDE_LIST="debian_version ubuntu_version"
DISTROS_PRIMARY="gentoo-release redhat-release slackware-version SuSE-release"
# Puppy Linux 4.1.2 (Bash 3.0: arrays won't work) --> works partially
### Bans Data
-# Precede a banword with $'\2' to prevent it from being subject to automated escaping by the make_ban_lists routine
-# $'\1' gets weird results :
-# user@host $ ARR=($'\x01'"one two" three four); echo ${ARR[0]} | hd -v
-# 00000000 01 01 6f 6e 65 20 74 77 6f 0a |..one two.|
-A_NORMAL_BANS=( corporation communications gmbh technologies technology group $'\2'"\<ltd\>" ltd. $'\2'"\<inc\>" inc. $'\2'\<co\> co. "(tm)" "(r)" "®" $'\2'"\(rev ..\)" )
-A_CPU_BANS=( @ cpu deca 'dual core' dual-core 'tri core' tri-core 'quad core' quad-core ennea genuine hepta hexa multi octa penta 'processor' processor single triple $'\2'"[0-9.]+ *[MmGg][Hh][Zz]" )
-# after processing, the ban arrays will be put into these:
-BAN_LIST_NORMAL=''
-BAN_LIST_CPU=''
+# Note that \<ltd\> bans only words, not parts of strings; in \<corp\> you can't use punctuation characters like . or ,
+# we're saving about 10+% of the total script exec time by hand building the ban lists here, using hard quotes.
+BAN_LIST_NORMAL='computing|computer|corporation|communications|electronics|electrical|electric|gmbh|group|industrial|international|revision|software|technologies|technology|ltd\.|\<ltd\>|inc\.|\<inc\>|intl\.|co\.|\<co\>|corp\.|\<corp\>|\(tm\)|\(r\)|®|\(rev ..\)'
+BAN_LIST_CPU='@|cpu deca|dual core|dual-core|tri core|tri-core|quad core|quad-core|ennea|genuine|hepta|hexa|multi|octa|penta|processor|single|triple|[0-9\.]+ *[MmGg][Hh][Zz]'
+
+SENSORS_GPU_SEARCH='intel|radeon|nouveau'
+
+### USB networking search string data, because some brands can have other products than
+### wifi/nic cards, they need further identifiers, with wildcards.
+### putting the most common and likely first, then the less common, then some specifics
+USB_NETWORK_SEARCH="Wi-Fi.*Adapter|Wireless.*Adapter|WLAN.*Adapter|Network.*Adapter|802\.11|Atheros|Atmel|D-Link.*Adapter|D-Link.*Wireless|Linksys|Netgea|Ralink|Realtek.*Network|Realtek.*Wireless|Realtek.*WLAN|Belkin.*Wireless|Belkin.*WLAN|Belkin.*Network"
+USB_NETWORK_SEARCH="$USB_NETWORK_SEARCH|Actiontec.*Wireless|Actiontec.*Network|AirLink.*Wireless|Asus.*Network|Asus.*Wireless|Buffalo.*Wireless|Davicom|DWA-.*RangeBooster|DWA-.*Wireless|ENUWI-.*Wireless|LG.*Wi-Fi|Rosewill.*Wireless|RNX-.*Wireless|Samsung.*LinkStick|Samsung.*Wireless|Sony.*Wireless|TEW-.*Wireless|TP-Link.*Wireless|WG[0-9][0-9][0-9].*Wireless|WNA[0-9][0-9][0-9]|WNDA[0-9][0-9][0-9]|Zonet.*ZEW.*Wireless|54 Mbps"
+# then a few known hard to ID ones added
+# belkin=050d; d-link=07d1; netgear=0846; ralink=148f; realtek=0bda;
+USB_NETWORK_SEARCH="$USB_NETWORK_SEARCH|050d:935b|0bda:8189|0bda:8197"
# WARNING: In the main part below (search for 'KONVI')
# there's a check for Konversation-specific config files.
{
eval $LOGFS
+ local color_scheme=''
+
# This function just initializes variables
initialize_script_data
# Check for dependencies BEFORE running ANYTHING else except above functions
- # Not all distro's have these depends installed by default
- check_script_depends
- check_script_suggested_apps
-
- # note: this needs to go AFTER depends check because these use gawk
- # Do this after sourcing of config overrides so user can customize banwords
- # Contrary to my previous belief, "${ARR[@]}" passes a quoted list, not one string
- BAN_LIST_NORMAL=$( make_ban_lists "${A_NORMAL_BANS[@]}" )
- BAN_LIST_CPU=$( make_ban_lists "${A_CPU_BANS[@]}" )
- ##echo "BAN_LIST_NORMAL='$BAN_LIST_NORMAL'"
+ # Not all distro's have these depends installed by default. Don't want to run
+ # this if the user is requesting to see this information in the first place
+ if [[ $1 != '--recommends' ]];then
+ check_script_depends
+ check_script_suggested_apps
+ fi
- # first init function must be set first for colors etc. Remember, no debugger
- # stuff works on this function unless you set the debugging flag manually.
- # Debugging flag -@ [number] will not work until get_parameters runs.
-
### Only continue if depends ok
SCRIPT_PATH=$( dirname $0 )
SCRIPT_VERSION_NUMBER=$( grep -im 1 'version:' $SCRIPT_PATH/$SCRIPT_NAME | gawk '{print $3}' )
+ SCRIPT_PATCH_NUMBER=$( grep -im 1 'Patch Number:' $SCRIPT_PATH/$SCRIPT_NAME | gawk '{print $4}' )
### Source global config overrides
if [[ -s /etc/$SCRIPT_NAME.conf ]];then
source /etc/$SCRIPT_NAME.conf
fi
- # Source user config overrides, ~/.inxi/inxi.conf
+ # Source user config variables override /etc/inxi.conf variables
if [[ -s $HOME/.$SCRIPT_NAME/$SCRIPT_NAME.conf ]];then
source $HOME/.$SCRIPT_NAME/$SCRIPT_NAME.conf
fi
## Konversation 1.2 apparently does not like the $PPID test in get_start_client
## So far there is no known way to detect if qt4_konvi is the parent process
## this method will infer qt4_konvi as parent
-
get_start_client
# note: this only works if it's run from inside konversation as a script builtin or something
# only do this if inxi has been started as a konversation script, otherwise bypass this
# KONVI=3 ## for testing puroses
- ##
if [[ $KONVI -eq 1 || $KONVI -eq 3 ]];then
-
if [[ $KONVI -eq 1 ]]; then ## dcop Konversation (ie 1.x < 1.2(qt3))
DCPORT="$1"
DCSERVER="$2"
# print_screen_output "DCPORT: $DCPORT"
# print_screen_output "DCSERVER: $DCSERVER"
# print_screen_output "DCTARGET: $DCTARGET"
-
+
+ # first init function must be set first for colors etc. Remember, no debugger
+ # stuff works on this function unless you set the debugging flag manually.
+ # Debugging flag -@ [number] will not work until get_parameters runs.
+
# "$@" passes every parameter separately quoted, "$*" passes all parameters as one quoted parameter.
# must be here to allow debugger and other flags to be set.
get_parameters "$@"
# If no colorscheme was set in the parameter handling routine, then set the default scheme
- if [[ $COLOR_SCHEME_SET != 'true' ]];then
- set_color_scheme "$DEFAULT_SCHEME"
+ if [[ $B_COLOR_SCHEME_SET != 'true' ]];then
+ # This let's user pick their color scheme. For IRC, only shows the color schemes, no interactive
+ # The override value only will be placed in user config files. /etc/inxi.conf can also override
+ if [[ $B_RUN_COLOR_SELECTOR == 'true' ]];then
+ select_default_color_scheme
+ else
+ # set the default, then override as required
+ color_scheme=$DEFAULT_COLOR_SCHEME
+ if [[ -n $GLOBAL_COLOR_SCHEME ]];then
+ color_scheme=$GLOBAL_COLOR_SCHEME
+ else
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ if [[ -n $CONSOLE_COLOR_SCHEME && -z $DISPLAY ]];then
+ color_scheme=$CONSOLE_COLOR_SCHEME
+ elif [[ -n $VIRT_TERM_COLOR_SCHEME ]];then
+ color_scheme=$VIRT_TERM_COLOR_SCHEME
+ fi
+ else
+ if [[ -n $IRC_X_TERM_COLOR_SCHEME && $B_CONSOLE_IRC == 'true' && -n $DISPLAY ]];then
+ color_scheme=$IRC_X_TERM_COLOR_SCHEME
+ elif [[ -n $IRC_CONS_COLOR_SCHEME && -z $DISPLAY ]];then
+ color_scheme=$IRC_CONS_COLOR_SCHEME
+ elif [[ -n $IRC_COLOR_SCHEME ]];then
+ color_scheme=$IRC_COLOR_SCHEME
+ fi
+ fi
+ fi
+ set_color_scheme $color_scheme
+ fi
+ fi
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ LINE_MAX=$LINE_MAX_CONSOLE
+ SEP3=$SEP3_CONSOLE
+ else
+ # too hard to read if no colors, so force that for users on irc
+ if [[ $SCHEME == 0 ]];then
+ SEP3=$SEP3_CONSOLE
+ else
+ SEP3=$SEP3_IRC
+ fi
+ LINE_MAX=$LINE_MAX_IRC
fi
# all the pre-start stuff is in place now
initialize_script_data()
{
eval $LOGFS
- local path='' sys_path='' added_path='' b_path_found=''
- # Extra path variable to make execute failures less likely, merged below
- local extra_paths="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin"
-
- # Fallback paths put into $extra_paths; This might, among others, help on gentoo.
- # Now, create a difference of $PATH and $extra_paths and add that to $PATH:
- IFS=":"
- for path in $extra_paths
- do
- b_path_found='false'
- for sys_path in $PATH
- do
- if [[ $path == $sys_path ]];then
- b_path_found='true'
- fi
- done
- if [[ $b_path_found == 'false' ]];then
- added_path="$added_path:$path"
- fi
- done
-
- IFS="$ORIGINAL_IFS"
- PATH="${PATH}${added_path}"
- ##echo "PATH='$PATH'"
- ##/bin/sh -c 'echo "PATH in subshell=\"$PATH\""'
-
+
# now set the script BOOLEANS for files required to run features
if [[ -d "/proc/" ]];then
B_PROC_DIR='true'
else
error_handler 6
fi
-
+
+ initialize_script_paths
+
+ # found a case of battery existing but having nothing in it on desktop mobo
+ # not all laptops show the first,
+ if [[ -n $( ls /proc/acpi/battery 2>/dev/null ) ]];then
+ B_PORTABLE='true'
+ fi
if [[ -e $FILE_CPUINFO ]]; then
B_CPUINFO_FILE='true'
fi
fi
if [[ -n $DISPLAY ]];then
- B_X_RUNNING='true'
+ B_SHOW_X_DATA='true'
+ B_RUNNING_IN_X='true'
fi
if [[ -e $FILE_MODULES ]];then
if [[ -e $FILE_PARTITIONS ]];then
B_PARTITIONS_FILE='true'
fi
+ # default to the normal location, then search for it
+ if [[ -e $FILE_XORG_LOG ]];then
+ B_XORG_LOG='true'
+ else
+ # Detect location of the Xorg log file
+ if [[ -n $( type -p xset ) ]]; then
+ FILE_XORG_LOG=$( xset q 2>/dev/null | grep -i 'Log file' | gawk '{print $3}')
+ if [[ -e $FILE_XORG_LOG ]];then
+ B_XORG_LOG='true'
+ fi
+ fi
+ fi
# gfx output will require this flag
if [[ $( whoami ) == 'root' ]];then
B_ROOT='true'
eval $LOGFE
}
+initialize_script_paths()
+{
+ local path='' added_path='' b_path_found='' sys_path=''
+ # Extra path variable to make execute failures less likely, merged below
+ local extra_paths="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin"
+
+ # Fallback paths put into $extra_paths; This might, among others, help on gentoo.
+ # Now, create a difference of $PATH and $extra_paths and add that to $PATH:
+ IFS=":"
+ for path in $extra_paths
+ do
+ b_path_found='false'
+ for sys_path in $PATH
+ do
+ if [[ $path == $sys_path ]];then
+ b_path_found='true'
+ fi
+ done
+ if [[ $b_path_found == 'false' ]];then
+ added_path="$added_path:$path"
+ fi
+ done
+
+ IFS="$ORIGINAL_IFS"
+ PATH="${PATH}${added_path}"
+ ##echo "PATH='$PATH'"
+ ##/bin/sh -c 'echo "PATH in subshell=\"$PATH\""'
+}
+
# No args taken.
check_script_suggested_apps()
{
eval $LOGFS
local app_name='' app_path=''
# bc removed from deps for now
- local depends="df free gawk grep hostname lspci ps readlink tr uname uptime wc"
- local x_apps="xrandr xdpyinfo glxinfo"
+ local depends="df free gawk grep lspci ps readlink tr uname uptime wc"
+ # no need to add xprop because it will just give N/A if not there, but if we expand use of xprop,
+ # should add that here as a test, then use the B_SHOW_X_DATA flag to trigger the tests in de function
+ local x_apps="xrandr xdpyinfo glxinfo"
- if [[ $B_X_RUNNING == 'true' ]];then
+ if [[ $B_RUNNING_IN_X == 'true' ]];then
for app_name in $x_apps
do
app_path=$( type -p $app_name )
if [[ -z $app_path ]];then
- script_debugger "Resuming in non X mode: $app_name not found in path"
- B_X_RUNNING='false'
+ script_debugger "Resuming in non X mode: $app_name not found. For package install advice run: $SCRIPT_NAME --recommends"
+ B_SHOW_X_DATA='false'
break
fi
done
eval $LOGFE
}
-# Filter boilerplate & buzzwords.
-# args: $1 - quoted: "$@" array of ban terms
-make_ban_lists()
-{
- eval $LOGFS
- local ban_list=''
- # Iterate over $@
- ## note: this is a weird, non-intuitive method, needs some documentation or rewriting
- ## if you declare ban_string it stops working, have to read up on this
- for ban_string
- do
- # echo "term=\"$ban_string\"" # >&2
- if [[ ${ban_string:0:1} = $'\2' ]];then
- ban_list="${ban_list}${ban_list+|}${ban_string:1:${#ban_string}-1}"
- else
- # Automatically escapes [ ] ( ) . and +
- ban_list="${ban_list}${ban_list+|}$( echo "$ban_string" | gawk '{
- gsub(/([\[\]+().])/,"\\\\&")
- print
- }' )"
- fi
- done
-
- echo "$ban_list"
- eval $LOGFS
-}
-# make_ban_lists "${A_CPU_BANS[@]}";exit
-
# Set the colorscheme
# args: $1 = <scheme number>|<"none">
set_color_scheme()
{
eval $LOGFS
- local i='' script_colors='' color_codes=''
+ local i='' a_script_colors='' a_color_codes=''
if [[ $1 -ge ${#A_COLOR_SCHEMES[@]} ]];then
set -- 1
# Set a global variable to allow checking for chosen scheme later
SCHEME="$1"
if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
- color_codes=( $ANSI_COLORS )
+ a_color_codes=( $ANSI_COLORS )
else
- color_codes=( $IRC_COLORS )
+ a_color_codes=( $IRC_COLORS )
fi
for (( i=0; i < ${#A_COLORS_AVAILABLE[@]}; i++ ))
do
- eval "${A_COLORS_AVAILABLE[i]}=\"${color_codes[i]}\""
+ eval "${A_COLORS_AVAILABLE[i]}=\"${a_color_codes[i]}\""
done
IFS=","
- script_colors=( ${A_COLOR_SCHEMES[$1]} )
+ a_script_colors=( ${A_COLOR_SCHEMES[$1]} )
IFS="$ORIGINAL_IFS"
# then assign the colors globally
- C1="${!script_colors[0]}"
- C2="${!script_colors[1]}"
- CN="${!script_colors[2]}"
+ C1="${!a_script_colors[0]}"
+ C2="${!a_script_colors[1]}"
+ CN="${!a_script_colors[2]}"
# ((COLOR_SCHEME++)) ## note: why is this? ##
eval $LOGFE
}
+select_default_color_scheme()
+{
+ eval $LOGFS
+ local spacer=' ' options='' user_selection='' config_variable=''
+ local config_file="$HOME/.$SCRIPT_NAME/$SCRIPT_NAME.conf"
+ local irc_clear="\e[0m"
+ local irc_gui='Unset' irc_console='Unset' irc_x_term='Unset'
+ local console='Unset' virt_term='Unset' global='Unset'
+
+ if [[ -n $IRC_COLOR_SCHEME ]];then
+ irc_gui="Set: $IRC_COLOR_SCHEME"
+ fi
+ if [[ -n $IRC_CONS_COLOR_SCHEME ]];then
+ irc_console="Set: $IRC_CONS_COLOR_SCHEME"
+ fi
+ if [[ -n $IRC_X_TERM_COLOR_SCHEME ]];then
+ irc_x_term="Set: $IRC_X_TERM_COLOR_SCHEME"
+ fi
+ if [[ -n $VIRT_TERM_COLOR_SCHEME ]];then
+ virt_term="Set: $VIRT_TERM_COLOR_SCHEME"
+ fi
+ if [[ -n $CONSOLE_COLOR_SCHEME ]];then
+ console="Set: $CONSOLE_COLOR_SCHEME"
+ fi
+ if [[ -n $GLOBAL_COLOR_SCHEME ]];then
+ global="Set: $GLOBAL_COLOR_SCHEME"
+ fi
+
+ # don't want these printing in irc since they show literally
+ if [[ $B_RUNNING_IN_SHELL != 'true' ]];then
+ irc_clear=''
+ fi
+ # first make output neutral so it's just plain default for console client
+ set_color_scheme "0"
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ print_screen_output "Welcome to $SCRIPT_NAME! Please select the default $COLOR_SELECTION color scheme."
+ # print_screen_output "You will see this message only one time per user account, unless you set preferences in: /etc/$SCRIPT_NAME.conf"
+ print_screen_output " "
+ fi
+ print_screen_output "Because there is no way to know your $COLOR_SELECTION foreground/background colors, you can"
+ print_screen_output "set your color preferences from color scheme option list below. 0 is no colors, 1 neutral."
+ print_screen_output "After these, there are 3 sets: 1-dark or light backgrounds; 2-light backgrounds; 3-dark backgrounds."
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ print_screen_output "Please note that this will set the $COLOR_SELECTION preferences only for user: $(whoami)"
+ fi
+ print_screen_output "------------------------------------------------------------------------------"
+ for (( i=0; i < ${#A_COLOR_SCHEMES[@]}; i++ ))
+ do
+ if [[ $i -gt 9 ]];then
+ spacer=' '
+ fi
+ # only offer the safe universal defaults
+ case $COLOR_SELECTION in
+ global|irc|irc-console|irc-virtual-terminal)
+ if [[ $i -gt $SAFE_COLOR_COUNT ]];then
+ break
+ fi
+ ;;
+ esac
+ set_color_scheme $i
+ print_screen_output "$irc_clear $i)$spacer${C1}Card:${C2} nVidia G86 [GeForce 8400 GS] ${C1}X.Org${C2} 1.7.7"
+ done
+ set_color_scheme 0
+
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ echo -n "\e[0m"
+ print_screen_output "$irc_clear $i)${spacer}Remove all color settings. Restore $SCRIPT_NAME default."
+ print_screen_output "$irc_clear $(($i+1)))${spacer}Continue, no changes or config file setting."
+ print_screen_output "$irc_clear $(($i+2)))${spacer}Exit, use another terminal, or set manually."
+ print_screen_output "------------------------------------------------------------------------------"
+ print_screen_output "Simply type the number for the color scheme that looks best to your eyes for your $COLOR_SELECTION settings"
+ print_screen_output "and hit ENTER. NOTE: You can bring this option list up by starting $SCRIPT_NAME with option: -c plus one of these numbers:"
+ print_screen_output "94 (console, no X - $console); 95 (terminal, X - $virt_term); 96 (irc, gui, X - $irc_gui);"
+ print_screen_output "97 (irc, X, in terminal - $irc_x_term); 98 (irc, no X - $irc_console); 99 (global - $global)"
+ print_screen_output "Your selection(s) will be stored here: $config_file"
+ print_screen_output "Global overrides all individual color schemes. Individual schemes remove the global setting."
+ print_screen_output "------------------------------------------------------------------------------"
+ read user_selection
+ if [[ -n $( grep -Es '^([0-9]+)$' <<< "$user_selection" ) && $user_selection -lt $i ]];then
+ case $COLOR_SELECTION in
+ irc)
+ config_variable='IRC_COLOR_SCHEME'
+ ;;
+ irc-console)
+ config_variable='IRC_CONS_COLOR_SCHEME'
+ ;;
+ irc-virtual-terminal)
+ config_variable='IRC_X_TERM_COLOR_SCHEME'
+ ;;
+ console)
+ config_variable='CONSOLE_COLOR_SCHEME'
+ ;;
+ virtual-terminal)
+ config_variable='VIRT_TERM_COLOR_SCHEME'
+ ;;
+ global)
+ config_variable='GLOBAL_COLOR_SCHEME'
+ ;;
+ esac
+ set_color_scheme $user_selection
+ # make file/directory first if missing
+ if [[ ! -f $config_file ]];then
+ if [[ ! -d $HOME/.$SCRIPT_NAME ]];then
+ mkdir $HOME/.$SCRIPT_NAME
+ fi
+ touch $config_file
+ fi
+ if [[ -z $( grep -s "$config_variable=" $config_file ) ]];then
+ print_screen_output "Creating and updating config file for $COLOR_SELECTION color scheme now..."
+ echo "$config_variable=$user_selection" >> $config_file
+ else
+ print_screen_output "Updating config file for $COLOR_SELECTION color scheme now..."
+ sed -i "s/$config_variable=.*/$config_variable=$user_selection/" $config_file
+ fi
+ # file exists now so we can go on to cleanup
+ case $COLOR_SELECTION in
+ irc|irc-console|irc-virtual-terminal|console|virtual-terminal)
+ sed -i '/GLOBAL_COLOR_SCHEME=/d' $config_file
+ ;;
+ global)
+ sed -i -e '/VIRT_TERM_COLOR_SCHEME=/d' -e '/CONSOLE_COLOR_SCHEME=/d' -e '/IRC_COLOR_SCHEME=/d' \
+ -e '/IRC_CONS_COLOR_SCHEME=/d' -e '/IRC_X_TERM_COLOR_SCHEME=/d' $config_file
+ ;;
+ esac
+ elif [[ $user_selection == $i ]];then
+ print_screen_output "Removing all color settings from config file now..."
+ sed -i -e '/VIRT_TERM_COLOR_SCHEME=/d' -e '/GLOBAL_COLOR_SCHEME=/d' -e '/CONSOLE_COLOR_SCHEME=/d' \
+ -e '/IRC_COLOR_SCHEME=/d' -e '/IRC_CONS_COLOR_SCHEME=/d' -e '/IRC_X_TERM_COLOR_SCHEME=/d' $config_file
+ set_color_scheme $DEFAULT_COLOR_SCHEME
+ elif [[ $user_selection == $(( $i+1 )) ]];then
+ print_screen_output "Ok, continuing $SCRIPT_NAME unchanged. You can set the colors anytime by starting with: -c 95 to 99"
+ if [[ -n $CONSOLE_COLOR_SCHEME && -z $DISPLAY ]];then
+ set_color_scheme $CONSOLE_COLOR_SCHEME
+ elif [[ -n $VIRT_TERM_COLOR_SCHEME ]];then
+ set_color_scheme $VIRT_TERM_COLOR_SCHEME
+ else
+ set_color_scheme $DEFAULT_COLOR_SCHEME
+ fi
+ elif [[ $user_selection == $(( $i+2 )) ]];then
+ set_color_scheme $DEFAULT_COLOR_SCHEME
+ print_screen_output "Ok, exiting $SCRIPT_NAME now. You can set the colors later."
+ exit 0
+ else
+ print_screen_output "Error - Invalid Selection. You entered this: $user_selection"
+ print_screen_output " "
+ select_default_color_scheme
+ fi
+ else
+ print_screen_output "------------------------------------------------------------------------------"
+ print_screen_output "After finding the scheme number you like, simply run this again in a terminal to set the configuration"
+ print_screen_output "data file for your irc client. You can set color schemes for the following: start inxi with -c plus:"
+ print_screen_output "94 (console, no X - $console); 95 (terminal, X - $virt_term); 96 (irc, gui, X - $irc_gui);"
+ print_screen_output "97 (irc, X, in terminal - $irc_x_term); 98 (irc, no X - $irc_console); 99 (global - $global)"
+ exit 0
+ fi
+
+ eval $LOGFE
+}
+
########################################################################
#### UTILITY FUNCTIONS
########################################################################
;;
4) error_message="unsupported verbosity level: $2"
;;
- 5) error_message="dependency not met: $2 not found in path"
+ 5) error_message="dependency not met: $2 not found in path.\nFor distribution installation package names and missing apps information, run: $SCRIPT_NAME --recommends"
;;
6) error_message="/proc not found! Quitting..."
;;
13)
error_message="The -t option requires the following extra arguments (no spaces between letters/numbers):\nc m cm [required], for example: -t cm8 OR -t cm OR -t c9\n(numbers: 1-20, > 5 throttled to 5 in irc clients) You entered: $2"
;;
+ 14)
+ error_message="failed to write correctly downloaded $SCRIPT_NAME to location $SCRIPT_PATH.\nThis usually means you don't have permission to write to that location, maybe you need to be root?\nThe operation failed with error: $2"
+ ;;
+ 15)
+ error_message="failed set execute permissions on $SCRIPT_NAME at location $SCRIPT_PATH.\nThis usually means you don't have permission to set permissions on files there, maybe you need to be root?\nThe operation failed with error: $2"
+ ;;
+ 16)
+ error_message="$SCRIPT_NAME downloaded but the file data is corrupted. Purged data and using current version."
+ ;;
+ 20)
+ error_message="The option you selected has been deprecated. $2\nSee the -h (help) menu for currently supported options."
+ ;;
*) error_message="error unknown: $@"
set -- 99
;;
script_self_updater()
{
eval $LOGFS
- local wget_error=0
+ local wget_error=0 file_contents=''
print_screen_output "Starting $SCRIPT_NAME self updater."
print_screen_output "Currently running $SCRIPT_NAME version number: $SCRIPT_VERSION_NUMBER"
+ print_screen_output "Current version patch number: $SCRIPT_PATCH_NUMBER"
print_screen_output "Updating $SCRIPT_NAME in $SCRIPT_PATH using $2 as download source..."
- # first test if path is good, need to make sure it's good because we're -O overwriting file
- wget -q --spider $1$SCRIPT_NAME || wget_error=$?
+
+ file_contents="$( wget -q -O - $1$SCRIPT_NAME )" || wget_error=$?
# then do the actual download
- if [[ $wget_error -eq 0 ]];then
- wget -q -O $SCRIPT_PATH/$SCRIPT_NAME $1$SCRIPT_NAME || wget_error=$?
- if [[ $wget_error -eq 0 ]];then
+ if [[ $wget_error -eq 0 ]];then
+ # make sure the whole file got downloaded and is in the variable
+ if [[ -n $( grep '###\*\*EOF\*\*###' <<< "$file_contents" ) ]];then
+ echo "$file_contents" > $SCRIPT_PATH/$SCRIPT_NAME || error_handler 14 "$?"
+ chmod +x $SCRIPT_PATH/$SCRIPT_NAME || error_handler 15 "$?"
SCRIPT_VERSION_NUMBER=$( grep -im 1 'version:' $SCRIPT_PATH/$SCRIPT_NAME | gawk '{print $3}' )
+ SCRIPT_PATCH_NUMBER=$( grep -im 1 'Patch Number:' $SCRIPT_PATH/$SCRIPT_NAME | gawk '{print $4}' )
print_screen_output "Successfully updated to $2 version: $SCRIPT_VERSION_NUMBER"
+ print_screen_output "New $2 version patch number: $SCRIPT_PATCH_NUMBER"
print_screen_output "To run the new version, just start $SCRIPT_NAME again."
exit 0
+ else
+ error_handler 16
fi
- fi
# now run the error handlers on any wget failure
- if [[ $wget_error -gt 0 ]];then
+ else
if [[ $2 == 'svn server' ]];then
error_handler 8 "$wget_error"
elif [[ $2 == 'alt server' ]];then
eval $LOGFS
}
+# args: $1 - debug data type: sys|xorg|disk
+debug_data_collector()
+{
+ local xiin_app='' xiin_data_file='' xiin_download='' error='' b_run_xiin='false'
+ local debug_data_dir="inxi-$(tr ' ' '-' <<< $HOSTNAME | tr '[A-Z]' '[a-z]' )-$1-$(date +%Y%m%d)"
+ local completed_gz_file='' xiin_file='xiin.py' ftp_upload='ftp.techpatterns.com/incoming'
+ local Line='-------------------------'
+
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
+ if [[ -n $ALTERNATE_FTP ]];then
+ ftp_upload=$ALTERNATE_FTP
+ fi
+ echo "Starting debugging data collection type: $1"
+ echo -n "Checking/creating required directories... "
+ if [[ ! -d $SCRIPT_DATA_DIR ]];then
+ mkdir $SCRIPT_DATA_DIR
+ fi
+ echo 'completed'
+ cd $SCRIPT_DATA_DIR
+ if [[ -d $debug_data_dir ]];then
+ echo 'Deleting previous xiin data directory...'
+ rm -rf $debug_data_dir
+ fi
+ mkdir $debug_data_dir
+ if [[ -f $debug_data_dir.tar.gz ]];then
+ echo 'Deleting previous tar.gz file...'
+ rm -f $debug_data_dir.tar.gz
+ fi
+
+ echo 'Collecting system info: sensors, lsusb, lspci, lspci -v data, plus /proc data'
+ lsusb &> $debug_data_dir/lsusb.txt
+ lspci &> $debug_data_dir/lspci.txt
+ lspci -v &> $debug_data_dir/lspci-v.txt
+ ps aux &> $debug_data_dir/ps-aux.txt
+ sensors &> $debug_data_dir/sensors.txt
+ ls /usr/bin/gcc* &> $debug_data_dir/gcc-sys-versions.txt
+ gcc --version &> $debug_data_dir/gcc-version.txt
+ cat $FILE_LSB_RELEASE &> $debug_data_dir/lsb-release.txt
+ cat $FILE_ASOUND_DEVICE &> $debug_data_dir/proc-asound-device.txt
+ cat $FILE_ASOUND_VERSION &> $debug_data_dir/proc-asound-version.txt
+ cat $FILE_CPUINFO &> $debug_data_dir/proc-cpu-info.txt
+ cat $FILE_MEMINFO &> $debug_data_dir/proc-meminfo.txt
+ cat $FILE_MODULES &> $debug_data_dir/proc-modules.txt
+ cat /proc/net/arp &> $debug_data_dir/proc-net-arp.txt
+ check_recommends &> $debug_data_dir/check-recommends.txt
+ # first download and verify xiin
+ if [[ $B_UPLOAD_DEBUG_DATA == 'true' || $1 == 'disk' || $1 == 'sys' || $1 == 'all' ]];then
+ touch $debug_data_dir/xiin-error.txt
+ echo "Downloading required tree traverse tool $xiin_file..."
+ if [[ -f xiin && ! -f $xiin_file ]];then
+ mv -f xiin $xiin_file
+ fi
+ # -Nc is creating really weird download anomolies, so using -O instead
+ xiin_download="$( wget -q -O - http://inxi.googlecode.com/svn/branches/xiin/$xiin_file )"
+ # if nothing got downloaded kick out error, otherwise we'll use an older version
+ if [[ $? -gt 0 && ! -f $xiin_file ]];then
+ echo -e "ERROR: Failed to download required file: $xiin_file\nMaybe the remote site is down or your networking is broken?"
+ echo "Continuing with incomplete data collection."
+ echo "$xiin_file download failed and no existing $xiin_file" >> $debug_data_dir/xiin-error.txt
+ elif [[ -n $( grep -s '# EOF' <<< "$xiin_download" ) || -f $xiin_file ]];then
+ if [[ -n $( grep -s '# EOF' <<< "$xiin_download" ) ]];then
+ echo "Updating $xiin_file from remote location"
+ echo "$xiin_download" > $xiin_file
+ else
+ echo "Using local $xiin_file due to download failure"
+ fi
+ b_run_xiin='true'
+ else
+ echo -e "ERROR: $xiin_file downloaded but the program file data is corrupted.\nContinuing with incomplete data collection."
+ echo "$xiin_file downloaded but the program file data is corrupted." >> $debug_data_dir/xiin-error.txt
+ fi
+ fi
+ # note, only bash 4> supports ;;& for case, so using if/then here
+ if [[ $1 == 'disk' || $1 == 'sys' || $1 == 'all' ]];then
+ xiin_data_file=$SCRIPT_DATA_DIR/$debug_data_dir/xiin-sys.txt
+ echo 'Collecting networking data...'
+ ifconfig &> $debug_data_dir/ifconfig.txt
+ ip addr &> $debug_data_dir/ip-addr.txt
+ if [[ $b_run_xiin == 'true' ]];then
+ echo $Line
+ echo "Running $xiin_file tool now on /sys..."
+ python ./$xiin_file -d /sys -f $xiin_data_file
+ if [[ $? -ne 0 ]];then
+ error=$?
+ echo -e "ERROR: $xiin_file exited with error $error - removing data file.\nContinuing with incomplete data collection."
+ echo "Continuing with incomplete data collection."
+ rm -f $xiin_data_file
+ echo "$xiin_file data generation failed with python error $error" >> $debug_data_dir/xiin-error.txt
+ fi
+ echo $Line
+ fi
+ fi
+ if [[ $1 == 'xorg' || $1 == 'all' ]];then
+ if [[ $B_RUNNING_IN_X != 'true' ]];then
+ echo 'Warning: only some of the data collection can occur if you are not in X'
+ touch $debug_data_dir/warning-user-not-in-x
+ fi
+ if [[ $B_ROOT == 'true' ]];then
+ echo 'Warning: only some of the data collection can occur if you are running as Root user'
+ touch $debug_data_dir/warning-root-user
+ fi
+ echo 'Collecting Xorg log and xorg.conf files'
+ if [[ -e $FILE_XORG_LOG ]];then
+ cat $FILE_XORG_LOG &> $debug_data_dir/xorg-log-file.txt
+ else
+ touch $debug_data_dir/no-xorg-log-file
+ fi
+ if [[ -e /etc/X11/xorg.conf ]];then
+ cp /etc/X11/xorg.conf $debug_data_dir
+ else
+ touch $debug_data_dir/no-xorg-conf-file
+ fi
+ if [[ -n $( ls /etc/X11/xorg.conf.d/ 2>/dev/null ) ]];then
+ ls /etc/X11/xorg.conf.d &> $debug_data_dir/ls-etc-x11-xorg-conf-d.txt
+ cp /etc/X11/xorg.conf.d $debug_data_dir
+ else
+ touch $debug_data_dir/no-xorg-conf-d-files
+ fi
+ echo 'Collecting X, xprop, glxinfo, xrandr, xdpyinfo data...'
+ xprop -root &> $debug_data_dir/xprop_root.txt
+ glxinfo &> $debug_data_dir/glxinfo.txt
+ xdpyinfo &> $debug_data_dir/xdpyinfo.txt
+ xrandr &> $debug_data_dir/xrandr.txt
+ X -version &> $debug_data_dir/x-version.txt
+ Xorg -version &> $debug_data_dir/xorg-version.txt
+ fi
+ if [[ $1 == 'disk' || $1 == 'all' ]];then
+ echo 'Collecting dev, label, disk, uuid data, df...'
+ ls -l /dev &> $debug_data_dir/dev-data.txt
+ ls -l /dev/disk &> $debug_data_dir/dev-disk-data.txt
+ ls -l /dev/disk/by-id &> $debug_data_dir/dev-disk-id-data.txt
+ ls -l /dev/disk/by-label &> $debug_data_dir/dev-disk-label-data.txt
+ ls -l /dev/disk/by-uuid &> $debug_data_dir/dev-disk-uuid-data.txt
+ ls -l /dev/disk/by-path &> $debug_data_dir/dev-disk-path-data.txt
+ readlink /dev/root &> $debug_data_dir/dev-root.txt
+ df -h -T -P --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 --exclude-type=devfs --exclude-type=linprocfs --exclude-type=sysfs --exclude-type=fdescfs &> $debug_data_dir/df-h-T-excludes.txt
+ swapon -s &> $debug_data_dir/swapon-s.txt
+ df -P --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 &> $debug_data_dir/df-excludes.txt
+ cat $FILE_PARTITIONS &> $debug_data_dir/proc-partitions.txt
+ cat $FILE_SCSI &> $debug_data_dir/proc-scsi.txt
+ cat $FILE_MOUNTS &> $debug_data_dir/proc-mounts.txt
+ cat /proc/sys/dev/cdrom/info &> $debug_data_dir/proc-cdrom-info.txt
+ ls /proc/ide/ &> $debug_data_dir/proc-ide.txt
+ cat /proc/ide/*/* &> $debug_data_dir/proc-ide-hdx-cat.txt
+ cat /etc/fstab &> $debug_data_dir/etc-fstab.txt
+ cat /etc/mtab &> $debug_data_dir/etc-mtab.txt
+ fi
+ echo 'Creating inxi output file now. This can take a few seconds...'
+ $SCRIPT_NAME -Fploudxx -c 0 -@ 8 > $debug_data_dir/inxi-Fploudxx.txt
+ cp $LOG_FILE $SCRIPT_DATA_DIR/$debug_data_dir
+ if [[ -f $debug_data_dir.tar.gz ]];then
+ echo "Found and removing previous tar.gz data file: $debug_data_dir.tar.gz"
+ rm -f $debug_data_dir.tar.gz
+ fi
+ echo 'Creating tar.gz compressed file of this material now. Contents:'
+ echo $Line
+ tar -cvzf $debug_data_dir.tar.gz $debug_data_dir
+ echo $Line
+ echo 'Cleaning up leftovers...'
+ rm -rf $debug_data_dir
+ echo 'Testing gzip file integrity...'
+ gzip -t $debug_data_dir.tar.gz
+ if [[ $? -gt 0 ]];then
+ echo 'Data in gz is corrupted, removing gzip file, try running data collector again.'
+ rm -f $debug_data_dir.tar.gz
+ echo "Data in gz is corrupted, removed gzip file" >> $debug_data_dir/gzip-error.txt
+ else
+ echo 'All done, you can find your data gzipped directory here:'
+ completed_gz_file=$SCRIPT_DATA_DIR/$debug_data_dir.tar.gz
+ echo $completed_gz_file
+ if [[ $B_UPLOAD_DEBUG_DATA == 'true' ]];then
+ echo $Line
+ if [[ $b_run_xiin == 'true' ]];then
+ echo "Running automatic upload of data to remote server $ftp_upload now..."
+ python ./$xiin_file --version
+ python ./$xiin_file -u $completed_gz_file $ftp_upload
+ if [[ $? -gt 0 ]];then
+ echo $Line
+ echo "Error: looks like the ftp upload failed. Error number: $?"
+ echo "The ftp upload failed. Error number: $?" >> $debug_data_dir/xiin-error.txt
+ fi
+ else
+ echo 'Unable to run the automoatic ftp upload because of an error with the xiin download.'
+ echo "Unable to run the automoatic ftp upload because of an error with the xiin download" >> $debug_data_dir/xiin-error.txt
+ fi
+ else
+ echo 'You can upload this here using most file managers: ftp.techpatterns.com/incoming'
+ echo 'then let a maintainer know it is uploaded.'
+ fi
+ fi
+ else
+ echo 'This feature only available in console or shell client! Exiting now.'
+ fi
+ exit 0
+}
+
+check_recommends()
+{
+ local Line='-----------------------------------------------------------------------------------------'
+ local gawk_version='N/A' sed_version='N/A' sudo_version='N/A' python_version='N/A'
+
+ if [[ $B_RUNNING_IN_SHELL != 'true' ]];then
+ print_screen_output "Sorry, you can't run this option in an IRC client."
+ exit 1
+ fi
+
+ initialize_script_paths
+
+ echo "$SCRIPT_NAME will now begin checking for the programs it needs to operate. First a check of"
+ echo "the main languages and tools $SCRIPT_NAME uses. Python is only for debugging data collection."
+ echo $Line
+ echo "Bash version: $( bash --version 2>&1 | awk 'BEGIN {IGNORECASE=1} /^GNU bash/ {print $4}' )"
+ if [[ -n $( type -p gawk ) ]];then
+ gawk_version=$( gawk --version 2>&1 | awk 'BEGIN {IGNORECASE=1} /^GNU Awk/ {print $3}' )
+ fi
+ if [[ -n $( type -p sed ) ]];then
+ sed_version=$( sed --version 2>&1 | awk 'BEGIN {IGNORECASE=1} /^GNU sed version/ {print $4}' )
+ fi
+ if [[ -n $( type -p sudo ) ]];then
+ sudo_version=$( sudo -V 2>&1 | awk 'BEGIN {IGNORECASE=1} /^Sudo version/ {print $3}' )
+ fi
+ if [[ -n $( type -p python ) ]];then
+ python_version=$( python --version 2>&1 | awk 'BEGIN {IGNORECASE=1} /^Python/ {print $2}' )
+ fi
+ echo "Gawk version: $gawk_version"
+ echo "Sed version: $sed_version"
+ echo "Sudo version: $sudo_version"
+ echo "Python version: $python_version"
+ echo $Line
+ echo "Test One: Required System Directories."
+ echo "If one of these system directories is missing, $SCRIPT_NAME cannot operate:"
+ echo
+ check_recommends_items 'required-dirs'
+ echo "Test Two: Required Core Applications."
+ echo "If one of these applications is missing, $SCRIPT_NAME cannot operate:"
+ echo
+ check_recommends_items 'required-apps'
+ echo 'Test Three: Script Recommends for Graphics Features. If you do not use X these do not matter.'
+ echo "If one of these applications is missing, $SCRIPT_NAME will have incomplete output:"
+ echo
+ check_recommends_items 'recommended-x-apps'
+ echo 'Test Four: Script Recommends for Remaining Features.'
+ echo "If one of these applications is missing, $SCRIPT_NAME will have incomplete output:"
+ echo
+ check_recommends_items 'recommended-apps'
+ echo 'Test Five: System Directories for Various Information.'
+ echo "If one of these directories is missing, $SCRIPT_NAME will have incomplete output:"
+ echo
+ check_recommends_items 'system-dirs'
+ echo 'All tests completed.'
+}
+# args: $1 - check item
+check_recommends_items()
+{
+ local item='' item_list='' item_string='' missing_items='' missing_string=''
+ local package='' application='' feature='' type='' starter='' finisher=''
+ local package_deb='' package_pacman='' package_rpm=''
+ local print_string='' separator=''
+ local required_dirs='/proc /sys'
+ # package-owner: 1 - debian/ubuntu; 2 - arch; 3 - yum/rpm
+ # pardus: pisi sf -q /usr/bin/package
+ local required_apps='
+ df:coreutils~coreutils~coreutils~:partition_data
+ free:procps~procps~procps~:system_memory
+ gawk:gawk~gawk~gawk~:core_tool
+ grep:grep~grep~grep~:string_search
+ lspci:pciutils~pciutils~pciutils~:hardware_data
+ ps:procps~procps~procps~:process_data
+ readlink:coreutils~coreutils~coreutils~:
+ sed:sed~sed~sed~:string_replace
+ tr:coreutils~coreutils~coreutils~:character_replace
+ uname:uname~coreutils~coreutils~:kernel_data
+ uptime:procps~procps~procps~:
+ wc:coreutils~coreutils~coreutils~:word_character_count
+ '
+ local x_recommends='
+ glxinfo:mesa-utils~mesa-demos~glx-utils~:-G_glx_info
+ xdpyinfo:X11-utils~xorg-xdpyinfo~xorg-x11-utils~:-G_multi_screen_resolution
+ xprop:X11-utils~xorg-xprop~x11-utils~:-S_desktop_data
+ xrandr:x11-xserver-utils~xrandr~x11-server-utils~:-G_single_screen_resolution
+ '
+ local recommended_apps='
+ file:file~file~file~:-o_unmounted_file_system
+ hddtemp:hddtemp~hddtemp~hddtemp~:-Dx_show_hdd_temp
+ ifconfig:net-tools~net-tools~net-tools~:-i_ip_lan-deprecated
+ ip:iproute~iproute2~iproute~:-i_ip_lan
+ sensors:lm-sensors~lm_sensors~lm-sensors~:-s_sensors_output
+ lsusb:usbutils~usbutils~usbutils~:-A_usb_audio;-N_usb_networking
+ modinfo:module-init-tools~module-init-tools~module-init-tools~:-Ax,-Nx_module_version
+ runlevel:sysvinit~sysvinit~systemd~:-I_runlevel
+ sudo:sudo~sudo~sudo~:-Dx_hddtemp-user;-o_file-user
+ '
+ local recommended_dirs='
+ /sys/class/dmi/id:-M_system,_motherboard,_bios
+ /dev:-l,-u,-o,-p,-P,-D_disk_partition_data
+ /dev/disk/by-label:-l,-o,-p,-P_partition_labels
+ /dev/disk/by-uuid:-u,-o,-p,-P_partition_uuid
+ '
+
+ case $1 in
+ required-dirs)
+ item_list=$required_dirs
+ item_string='Required file system'
+ missing_string='system directories'
+ type='directories'
+ ;;
+ required-apps)
+ item_list=$required_apps
+ item_string='Required application'
+ missing_string='applications, and their corresponding packages,'
+ type='applications'
+ ;;
+ recommended-x-apps)
+ item_list=$x_recommends
+ item_string='Recommended X application'
+ missing_string='applications, and their corresponding packages,'
+ type='applications'
+ ;;
+ recommended-apps)
+ item_list=$recommended_apps
+ item_string='Recommended application'
+ missing_string='applications, and their corresponding packages,'
+ type='applications'
+ ;;
+ system-dirs)
+ item_list=$recommended_dirs
+ item_string='System directory'
+ missing_string='system directories'
+ type='directories'
+ ;;
+ esac
+ # great trick from: http://ideatrash.net/2011/01/bash-string-padding-with-sed.html
+ # left pad: sed -e :a -e 's/^.\{1,80\}$/& /;ta'
+ # right pad: sed -e :a -e 's/^.\{1,80\}$/ &/;ta'
+ # center pad: sed -e :a -e 's/^.\{1,80\}$/ & /;ta'
+
+ for item in $item_list
+ do
+ if [[ $( awk -F ":" '{print NF-1}' <<< $item ) -eq 0 ]];then
+ application=$item
+ package=''
+ feature=''
+ location=''
+ elif [[ $( awk -F ":" '{print NF-1}' <<< $item ) -eq 1 ]];then
+ application=$( cut -d ':' -f 1 <<< $item )
+ package=''
+ feature=$( cut -d ':' -f 2 <<< $item )
+ location=''
+ else
+ application=$( cut -d ':' -f 1 <<< $item )
+ package=$( cut -d ':' -f 2 <<< $item )
+ location=$( type -p $application )
+ if [[ $( awk -F ":" '{print NF-1}' <<< $item ) -eq 2 ]];then
+ feature=$( cut -d ':' -f 3 <<< $item )
+ else
+ feature=''
+ fi
+ fi
+ if [[ -n $feature ]];then
+ print_string="$item_string: $application (info: $( sed 's/_/ /g' <<< $feature ))"
+ else
+ print_string="$item_string: $application"
+ fi
+ starter="$( sed -e :a -e 's/^.\{1,75\}$/&./;ta' <<< $print_string )"
+ if [[ -z $( grep '^/' <<< $application ) && -n $location ]] || [[ -d $application ]];then
+ if [[ -n $location ]];then
+ finisher=" $location"
+ else
+ finisher=" Present"
+ fi
+ else
+ finisher=" Missing"
+ missing_items="$missing_items$separator$application:$package"
+ separator=' '
+ fi
+
+ echo "$starter$finisher"
+ done
+ echo
+ if [[ -n $missing_items ]];then
+ echo "The following $type are missing from your system:"
+ for item in $missing_items
+ do
+ application=$( cut -d ':' -f 1 <<< $item )
+ if [[ $type == 'applications' ]];then
+ # echo '--------------------------------------------------------'
+ echo
+ package=$( cut -d ':' -f 2 <<< $item )
+ package_deb=$( cut -d '~' -f 1 <<< $package )
+ package_pacman=$( cut -d '~' -f 2 <<< $package )
+ package_rpm=$( cut -d '~' -f 3 <<< $package )
+ echo "Application: $application"
+ echo "To add to your system, install the proper distribution package for your system:"
+ echo "Debian/Ubuntu: $package_deb :: Arch Linux: $package_pacman :: Redhat/Fedora/Suse: $package_rpm"
+ else
+ echo "Directory: $application"
+ fi
+ done
+ if [[ $item_string == 'System directory' ]];then
+ echo "These directories are created by the kernel, so don't worry if they are not present."
+ fi
+ else
+ echo "All the $( cut -d ' ' -f 1 <<< $item_string | sed -e 's/Re/re/' -e 's/Sy/sy/' ) $type are present."
+ fi
+ echo $Line
+}
+
#### -------------------------------------------------------------------
#### print / output cleaners
#### -------------------------------------------------------------------
get_parameters()
{
eval $LOGFS
- local opt='' wget_test='' update_flags='U!:'
+ local opt='' wget_test='' update_flags='U!:' debug_data_type=''
local use_short='true' # this is needed to trigger short output, every v/d/F/line trigger sets this false
# If distro maintainers want to not allow updates, turn off that option for users
if [[ $B_ALLOW_UPDATE == 'false' ]];then
update_flags=''
fi
-
+ if [[ $1 == '--version' ]];then
+ print_version_info
+ exit 0
+ elif [[ $1 == '--help' ]];then
+ show_options
+ exit 0
+ elif [[ $1 == '--recommends' ]];then
+ check_recommends
+ exit 0
# the short form only runs if no args output args are used
# no need to run through these if there are no args
- if [[ -n $1 ]];then
- while getopts Ac:CdDfFGhHiIlNopPrsSt:uv:Vx%@:${update_flags} opt
+ # reserved for future use: -g for extra Graphics; -m for extra Machine; -d for extra Disk
+ elif [[ -n $1 ]];then
+ while getopts Abc:CdDfFGhHiIlMnNopPrsSt:uv:VxzZ%@:${update_flags} opt
do
case $opt in
A) B_SHOW_AUDIO='true'
use_short='false'
;;
+ b) use_short='false'
+ B_SHOW_BASIC_CPU='true'
+ B_SHOW_DISK_TOTAL='true'
+ B_SHOW_GRAPHICS='true'
+ B_SHOW_INFO='true'
+ B_SHOW_MACHINE='true'
+ B_SHOW_NETWORK='true'
+ B_SHOW_SYSTEM='true'
+ ;;
c) if [[ -n $( grep -E '^[0-9][0-9]?$' <<< $OPTARG ) ]];then
- COLOR_SCHEME_SET='true'
- ## note: not sure about this, you'd think user values should be overridden, but
- ## we'll leave this for now
- if [[ -z $COLOR_SCHEME ]];then
- set_color_scheme "$OPTARG"
- fi
+ case $OPTARG in
+ 99)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='global'
+ ;;
+ 98)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='irc-console'
+ ;;
+ 97)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='irc-virtual-terminal'
+ ;;
+ 96)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='irc'
+ ;;
+ 95)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='virtual-terminal'
+ ;;
+ 94)
+ B_RUN_COLOR_SELECTOR='true'
+ COLOR_SELECTION='console'
+ ;;
+ *)
+ B_COLOR_SCHEME_SET='true'
+ ## note: not sure about this, you'd think user values should be overridden, but
+ ## we'll leave this for now
+ if [[ -z $COLOR_SCHEME ]];then
+ set_color_scheme "$OPTARG"
+ fi
+ ;;
+ esac
else
error_handler 3 "$OPTARG"
fi
C) B_SHOW_CPU='true'
use_short='false'
;;
- d) VERBOSITY_LEVEL=1
+ d) B_SHOW_DISK='true'
+ B_SHOW_FULL_OPTICAL='true'
use_short='false'
+ # error_handler 20 "-d has been replaced by -b"
;;
D) B_SHOW_DISK='true'
use_short='false'
B_CPU_FLAGS_FULL='true'
use_short='false'
;;
- F) VERBOSITY_LEVEL=$VERBOSITY_LEVELS
- B_EXTRA_DATA='true'
+ F) # B_EXTRA_DATA='true'
+ B_SHOW_ADVANCED_NETWORK='true'
+ B_SHOW_AUDIO='true'
+ # B_SHOW_BASIC_OPTICAL='true'
+ B_SHOW_CPU='true'
B_SHOW_DISK='true'
+ B_SHOW_GRAPHICS='true'
+ B_SHOW_INFO='true'
+ B_SHOW_MACHINE='true'
+ B_SHOW_NETWORK='true'
B_SHOW_PARTITIONS='true'
- B_SHOW_AUDIO='true'
+ B_SHOW_SENSORS='true'
+ B_SHOW_SYSTEM='true'
use_short='false'
;;
G) B_SHOW_GRAPHICS='true'
;;
i) B_SHOW_IP='true'
B_SHOW_NETWORK='true'
+ B_SHOW_ADVANCED_NETWORK='true'
use_short='false'
;;
I) B_SHOW_INFO='true'
B_SHOW_PARTITIONS='true'
use_short='false'
;;
+ M) B_SHOW_MACHINE='true'
+ use_short='false'
+ ;;
+ n) B_SHOW_ADVANCED_NETWORK='true'
+ B_SHOW_NETWORK='true'
+ use_short='false'
+ ;;
N) B_SHOW_NETWORK='true'
use_short='false'
;;
- o) B_SHOW_UNMOUNTED_PARTITIONS='true'
+ o) B_SHOW_UNMOUNTED_PARTITIONS='true'
use_short='false'
;;
p) B_SHOW_PARTITIONS_FULL='true'
r) B_SHOW_REPOS='true'
use_short='false'
;;
-
s) B_SHOW_SENSORS='true'
use_short='false'
;;
use_short='false'
;;
v) if [[ -n $( grep -E "^[0-9][0-9]?$" <<< $OPTARG ) && $OPTARG -le $VERBOSITY_LEVELS ]];then
- VERBOSITY_LEVEL="$OPTARG"
- if [[ $OPTARG -gt 0 ]];then
+ if [[ $OPTARG -ge 1 ]];then
use_short='false'
+ B_SHOW_BASIC_CPU='true'
+ B_SHOW_DISK_TOTAL='true'
+ B_SHOW_GRAPHICS='true'
+ B_SHOW_INFO='true'
+ B_SHOW_SYSTEM='true'
+ fi
+ if [[ $OPTARG -ge 2 ]];then
+ B_SHOW_BASIC_DISK='true'
+ B_SHOW_MACHINE='true'
+ B_SHOW_NETWORK='true'
+ fi
+ if [[ $OPTARG -ge 3 ]];then
+ B_SHOW_ADVANCED_NETWORK='true'
+ B_SHOW_CPU='true'
+ B_EXTRA_DATA='true'
+ fi
+ if [[ $OPTARG -ge 4 ]];then
+ B_SHOW_DISK='true'
+ B_SHOW_PARTITIONS='true'
+ fi
+ if [[ $OPTARG -ge 5 ]];then
+ B_SHOW_AUDIO='true'
+ B_SHOW_BASIC_OPTICAL='true'
+ B_SHOW_SENSORS='true'
+ B_SHOW_LABELS='true'
+ B_SHOW_UUIDS='true'
+ fi
+ if [[ $OPTARG -ge 6 ]];then
+ B_SHOW_FULL_OPTICAL='true'
+ B_SHOW_PARTITIONS_FULL='true'
+ B_SHOW_UNMOUNTED_PARTITIONS='true'
+ fi
+ if [[ $OPTARG -ge 7 ]];then
+ B_EXTRA_EXTRA_DATA='true'
+ B_SHOW_IP='true'
fi
else
error_handler 4 "$OPTARG"
V) print_version_info
exit 0
;;
- x) B_EXTRA_DATA='true'
+ # this will trigger either with xx or with Fx but not with xF
+ x) if [[ $B_EXTRA_DATA == 'true' ]];then
+ B_EXTRA_EXTRA_DATA='true'
+ fi
+ B_EXTRA_DATA='true'
+ ;;
+ z) B_OUTPUT_FILTER='true'
+ ;;
+ Z) B_OVERRIDE_FILTER='true'
;;
h) show_options
exit 0
## debuggers and testing tools
%) B_HANDLE_CORRUPT_DATA='true'
;;
- @) if [[ -n $( grep -E "^([1-9]|10)$" <<< $OPTARG ) ]];then
+ @) if [[ -n $( grep -E "^([1-9]|1[0-4])$" <<< $OPTARG ) ]];then
DEBUG=$OPTARG
+ if [[ $B_EXTRA_EXTRA_DATA == 'true' ]];then
+ B_UPLOAD_DEBUG_DATA='true'
+ fi
exec 2>&1
# switch on logging only for -@ 8-10
- if [[ $OPTARG -ge 8 ]];then
- if [[ $OPTARG -eq 10 ]];then
- B_LOG_COLORS='true'
- elif [[ $OPTARG -eq 9 ]];then
- B_LOG_FULL_DATA='true'
- fi
- B_USE_LOGGING='true'
- # pack the logging data for evals function start/end
- LOGFS=$LOGFS_STRING
- LOGFE=$LOGFE_STRING
- create_rotate_logfiles # create/rotate logfiles before we do anything else
- fi
+ case $OPTARG in
+ 8|9|10)
+ if [[ $OPTARG -eq 10 ]];then
+ B_LOG_COLORS='true'
+ elif [[ $OPTARG -eq 9 ]];then
+ B_LOG_FULL_DATA='true'
+ fi
+ B_USE_LOGGING='true'
+ # pack the logging data for evals function start/end
+ LOGFS=$LOGFS_STRING
+ LOGFE=$LOGFE_STRING
+ create_rotate_logfiles # create/rotate logfiles before we do anything else
+ ;;
+ 11|12|13|14)
+ case $OPTARG in
+ 11)
+ debug_data_type='sys'
+ ;;
+ 12)
+ debug_data_type='xorg'
+ ;;
+ 13)
+ debug_data_type='disk'
+ ;;
+ 14)
+ debug_data_type='all'
+ ;;
+ esac
+ initialize_script_data
+ debug_data_collector $debug_data_type
+ ;;
+ esac
else
error_handler 9 "$OPTARG"
fi
14)
script_self_updater "$SCRIPT_DOWNLOAD_BRANCH_4" 'svn: branch four server'
;;
+ ftp*)
+ ALTERNATE_FTP="$OPTARG"
+ ;;
http*)
script_self_updater "$OPTARG" 'alt server'
;;
if [[ $use_short == 'true' ]];then
B_SHOW_SHORT_OUTPUT='true'
fi
+ # just in case someone insists on using -zZ
+ if [[ $B_OVERRIDE_FILTER == 'true' ]];then
+ B_OUTPUT_FILTER='false'
+ fi
eval $LOGFE
}
## print out help menu, not including Testing or Debugger stuff because it's not needed
show_options()
{
- local color_scheme_count=${#A_COLOR_SCHEMES[@]}
-
+ local color_scheme_count=$(( ${#A_COLOR_SCHEMES[@]} - 1 ))
+
+ if [[ $B_RUNNING_IN_SHELL != 'true' ]];then
+ print_screen_output "Sorry, you can't run the help option in an IRC client."
+ exit 1
+ fi
print_screen_output "$SCRIPT_NAME supports the following options. You can combine them, or list them"
- print_screen_output "one by one: Examples: $SCRIPT_NAME -v4 -c6 OR $SCRIPT_NAME -dDc 6"
- print_screen_output ""
+ print_screen_output "one by one: Examples: $SCRIPT_NAME -v4 -c6 OR $SCRIPT_NAME -bDc 6"
+ print_screen_output " "
print_screen_output "If you start $SCRIPT_NAME with no arguments, it will show the short form."
- print_screen_output "The following options if used without -d or -v will show just that complete line:"
- print_screen_output "A,C,D,G,I,N,P,S - you can use these together to show just the lines you want to see."
- print_screen_output "If you use them with a -v level (or -d), it will show the full output for that line "
+ print_screen_output "The following options if used without -F, -b, or -v will show just the complete line(s):"
+ print_screen_output "A,C,D,G,I,M,N,P,S,f,i,n,o,p,l,u,r,s,t - you can use these alone or together to show"
+ print_screen_output "just the line(s) you want to see."
+ print_screen_output "If you use them with -v [level], -b or -F, it will show the full output for that line "
print_screen_output "along with the output for the chosen verbosity level."
print_screen_output "- - - - - - - - - - - - - - - - - - - - - - - - - - - - -"
print_screen_output "Output Control Options:"
print_screen_output "-A Show Audio/sound card information."
- print_screen_output "-c Available color schemes. Scheme number is required."
- print_screen_output " Supported schemes: 0-$color_scheme_count Example: $SCRIPT_NAME -c 11"
+ print_screen_output "-b Shows basic output, short form (previously -d). Same as: $SCRIPT_NAME -v 2"
+ print_screen_output "-c Available color schemes. Scheme number is required. Color selectors run a color selector option"
+ print_screen_output " prior to $SCRIPT_NAME starting which lets you set the config file value for the selection."
+ print_screen_output " Supported color schemes: 0-$color_scheme_count Example: $SCRIPT_NAME -c 11"
+ print_screen_output " Color selectors for each type display (NOTE: irc and global only show safe color set):"
+ print_screen_output " 94 - Console, out of X"
+ print_screen_output " 95 - Terminal, running in X - like xTerm"
+ print_screen_output " 96 - Gui IRC, running in X - like Xchat, Quassel, Konversation etc."
+ print_screen_output " 97 - Console IRC running in X - like irssi in xTerm"
+ print_screen_output " 98 - Console IRC not in X"
+ print_screen_output " 99 - Global - Overrides/removes all settings. Setting specific removes global."
print_screen_output "-C Show full CPU output, including per CPU clockspeed."
- print_screen_output "-d Default output verbosity level, same as: $SCRIPT_NAME -v 1"
+ print_screen_output "-d Shows optical drive data. Same as -Dd. With -x, adds features line to output. -xx adds a few more features."
print_screen_output "-D Show full hard Disk info, not only model, ie: /dev/sda ST380817AS 80.0GB."
print_screen_output "-f Show all cpu flags used, not just the short list. Not shown with -F to avoid spamming."
- print_screen_output "-F Show Full output for $SCRIPT_NAME. Does not show extra verbose options like -f -u -l -o -p or -t"
+ print_screen_output "-F Show Full output for $SCRIPT_NAME. Includes all Upper Case line letters, plus -s and -n."
+ print_screen_output " Does not show extra verbose options like -x -d -f -u -l -o -p -t -r unless you use that argument."
print_screen_output "-G Show Graphic card information (card, x type, resolution, glx renderer, version)."
- print_screen_output "-i Show Wan IP address, and shows local interfaces (requires ifconfig network tool)."
+ print_screen_output "-i Show Wan IP address, and shows local interfaces (requires ifconfig network tool). Same as -Nni"
print_screen_output " Not shown with -F for user security reasons, you shouldn't paste your local/wan IP."
print_screen_output "-I Show Information: processes, uptime, memory, irc client, inxi version."
print_screen_output "-l Show partition labels. Default: short partition -P. For full -p output, use: -pl (or -plu)."
- print_screen_output "-N Show Network card information."
+ print_screen_output "-M Show machine data. Motherboard, Bios, and if present, System Builder (Like Lenovo)."
+ print_screen_output " Older systems/kernels without the required /sys data can use dmidecode instead, run as root."
+ print_screen_output "-n Show Advanced Network card information. Same as -Nn. Shows interface, speed, mac id, state, etc."
+ print_screen_output "-N Show Network card information. With -x, shows PCI BusID, Port number."
print_screen_output "-o Show unmounted partition information (includes UUID and LABEL if available)."
print_screen_output " Shows file system type if you have file installed, if you are root OR if you have"
print_screen_output " added to /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/bin/file (sample)"
print_screen_output "-r Show distro repository data. Currently supported repo types: APT; PACMAN; PISI; YUM."
print_screen_output "-s Show sensors output (if sensors installed/configured): mobo/cpu/gpu temp; detected fan speeds."
print_screen_output " Gpu temp only for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screens."
- print_screen_output "-S Show System information: host name, kernel, distro"
+ print_screen_output "-S Show System information: host name, kernel, desktop environment (if in X), distro"
print_screen_output "-t Show processes. Requires extra options: c (cpu) m (memory) cm (cpu+memory). If followed by numbers 1-20,"
print_screen_output " shows that number of processes for each type (default: $PS_COUNT; if in irc, max: 5): -t cm10"
print_screen_output " Make sure to have no space between letters and numbers (-t cm10 -right, -t cm 10 -wrong)."
print_screen_output "-u Show partition UUIDs. Default: short partition -P. For full -p output, use: -pu (or -plu)."
- print_screen_output "-v Script verbosity levels. Verbosity level number is required."
+ print_screen_output "-v Script verbosity levels. Verbosity level number is required. Should not be used with -b or -F"
print_screen_output " Supported levels: 0-${VERBOSITY_LEVELS} Example: $SCRIPT_NAME -v 4"
- print_screen_output " 0 - short output, same as: $SCRIPT_NAME"
- print_screen_output " 1 - basic verbose, same as: $SCRIPT_NAME -d"
- print_screen_output " 2 - Also show networking card data"
- print_screen_output " 3 - Also show hard disk names as detected."
- print_screen_output " 4 - Also show partition size/filled data for (if present):/, /home, /var/, /boot"
- print_screen_output " 5 - For multicore systems, also shows: per core clock speeds; audio card; full disk data."
- print_screen_output "-x Show extra data: bogomips on Cpu; driver version (if available) for Network/Audio;"
- print_screen_output " for network, audio cards, shows PCI Bus ID number also;"
- print_screen_output " direct rendering status for Graphics (in X). Only works with verbose or line output;"
- print_screen_output " shows (for single gpu, nvidia driver) screen number gpu is running on."
- print_screen_output " Shows hdd temp with disk data if you have hddtemp installed, if you are root OR if you have"
- print_screen_output " added to /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)"
- print_screen_output " For -t, adds memory use output to cpu (-tx c), and cpu use to memory (-tx m)."
- print_screen_output ""
+ print_screen_output " 0 - Short output, same as: $SCRIPT_NAME"
+ print_screen_output " 1 - Basic verbose, -S + basic CPU + -G + basic Disk + -I."
+ print_screen_output " 2 - Adds networking card (-N), Machine (-M) data, and shows basic hard disk data (names only)."
+ print_screen_output " Same as: $SCRIPT_NAME -b"
+ print_screen_output " 3 - Adds advanced CPU (-C), network (-n) data, and switches on -x advanced data option."
+ print_screen_output " 4 - Adds partition size/filled data (-P) for (if present):/, /home, /var/, /boot"
+ print_screen_output " Shows full disk data (-D)"
+ print_screen_output " 5 - Adds audio card (-A); sensors (-s), partion label (-l) and UUID (-u), short form of optical drives."
+ print_screen_output " 6 - Adds full partition data (-p), unmounted partition data (-o), optical drive data (-d)."
+ print_screen_output " 7 - Adds network IP data (-i); triggers -xx."
+ print_screen_output "-x Show extra data (only works with verbose or line output, not short form): "
+ print_screen_output " -C - bogomips on Cpu;"
+ print_screen_output " -d - Adds items to features line of optical drive; adds rev version to optical drive."
+ print_screen_output " -D - Hdd temp with disk data if you have hddtemp installed, if you are root OR if you have added to"
+ print_screen_output " /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)"
+ print_screen_output " -G - Direct rendering status for Graphics (in X)."
+ print_screen_output " -G - (for single gpu, nvidia driver) screen number gpu is running on."
+ print_screen_output " -i - Show IPv6 as well for LAN interface (IF) devices."
+ print_screen_output " -I - Show system GCC, default. With -xx, also show other installed GCC versions."
+ print_screen_output " -N -A - Adds version/port(s)/driver version (if available) for Network/Audio;"
+ print_screen_output " -N -A -G - Network, audio, graphics, shows PCI Bus ID/Usb ID number of card;"
+ print_screen_output " -S - Desktop toolkit if avaliable (GNOME/XFCE/KDE only); Kernel gcc version"
+ print_screen_output " -t - Adds memory use output to cpu (-xt c), and cpu use to memory (-xt m)."
+ print_screen_output "-xx Show extra, extra data (only works with verbose or line output, not short form): "
+ print_screen_output " -I - Adds other detected installed gcc versions to primary gcc output (if present)."
+ print_screen_output " -M - Adds chassis information, if any data for that is available."
+ print_screen_output " -xx -@ <11-14> - Automatically uploads debugger data tar.gz file to ftp.techpatterns.com."
+ print_screen_output "-z Adds security filters for IP addresses, Mac, and user home directory name. Default on for irc clients."
+ print_screen_output "-Z Absolute override for output filters. Useful for debugging networking issues in irc for example."
+ print_screen_output " "
print_screen_output "Additional Options:"
- print_screen_output "-h - this help menu."
+ print_screen_output "-h --help This help menu."
+ print_screen_output "-H This help menu, plus developer options. Do not use dev options in normal operation!"
+ print_screen_output "--recommends Checks $SCRIPT_NAME application dependencies + recommends, and directories, then shows"
+ print_screen_output " what package(s) you need to install to add support for that feature."
if [[ $B_ALLOW_UPDATE == 'true' ]];then
- print_screen_output "-U Auto-update script. Note: if you installed as root, you"
- print_screen_output " must be root to update, otherwise user is fine."
+ print_screen_output "-U Auto-update script. Note: if you installed as root, you"
+ print_screen_output " must be root to update, otherwise user is fine."
fi
- print_screen_output "-V $SCRIPT_NAME version information. Prints information then exits."
+ print_screen_output "-V --version $SCRIPT_NAME version information. Prints information then exits."
+ print_screen_output " "
+ print_screen_output "Debugging Options:"
print_screen_output "-% Overrides defective or corrupted data."
- print_screen_output "-@ Triggers debugger output. Requires debugging level 1-10 (8-10 - logging)."
- print_screen_output " 8 - basic logging; 9 - full file/sys info logging; 10 - color logging."
+ print_screen_output "-@ Triggers debugger output. Requires debugging level 1-14 (8-10 - logging of data)."
+ print_screen_output " Less than 8 just triggers $SCRIPT_NAME debugger output on screen."
+ print_screen_output " 1-7 - On screen debugger output"
+ print_screen_output " 8 - Basic logging"
+ print_screen_output " 9 - Full file/sys info logging"
+ print_screen_output " 10 - Color logging."
+ print_screen_output " The following create a tar.gz file of system data, plus collecting the inxi output to file:"
+ print_screen_output " To automatically upload debugger data tar.gz file to ftp.techpatterns.com: inxi -xx@ <11-14>"
+ print_screen_output " For alternate ftp upload locations: Example: inxi -! ftp.yourserver.com/incoming -xx@ 14"
+ print_screen_output " 11 - With data file of xiin read of /sys."
+ print_screen_output " 12 - With xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc."
+ print_screen_output " 13 - With data from dev, disks, partitions, etc., plus xiin data file."
+ print_screen_output " 14 - Everything, full data collection."
if [[ $1 == 'full' ]];then
- print_screen_output ""
+ print_screen_output " "
print_screen_output "Developer and Testing Options (Advanced):"
print_screen_output "-! 1 - Sets testing flag B_TESTING_1='true' to trigger testing condition 1."
print_screen_output "-! 2 - Sets testing flag B_TESTING_2='true' to trigger testing condition 2."
print_screen_output "-! 13 - Triggers an update from svn branch three - if present, of course."
print_screen_output "-! 14 - Triggers an update from svn branch four - if present, of course."
print_screen_output "-! <http://......> - Triggers an update from whatever server you list."
- print_screen_output ""
+ print_screen_output "-! <ftp.......> - Changes debugging data ftp upload location to whatever you enter here."
+ print_screen_output " Only used together with -xx@ 11-14, and must be used in front of that."
+ print_screen_output " Example: inxi -! ftp.yourserver.com/incoming -xx@ 14"
+ print_screen_output " "
fi
- print_screen_output ""
+ print_screen_output " "
}
## print out version information for -V/--version
{
local last_modified=$( grep -im 1 'date:' $SCRIPT_PATH/$SCRIPT_NAME | gawk '{print $3,$4,$5}' )
- print_screen_output "$SCRIPT_NAME - the universal, portable, system info script for irc."
- print_screen_output "Version: $SCRIPT_VERSION_NUMBER"
+ print_screen_output "$SCRIPT_NAME - the universal, portable, system info script for console and irc."
+ print_screen_output "Version: $SCRIPT_VERSION_NUMBER-$SCRIPT_PATCH_NUMBER"
print_screen_output "Script Last Modified: $last_modified"
print_screen_output "Script Location: $SCRIPT_PATH"
- print_screen_output ""
- print_screen_output "Tested with Irssi, Xchat, Konversation, BitchX, KSirc, ircII,"
- print_screen_output "Gaim/Pidgin, Weechat, KVIrc and Kopete."
- print_screen_output ""
+ print_screen_output " "
+ print_screen_output "Tested in Irssi, Xchat, Konversation, BitchX, KSirc, ircII,"
+ print_screen_output "Gaim/Pidgin, Weechat, KVIrc, Quassel, Kopete, and others."
+ print_screen_output " "
print_screen_output "This script is a fork of Infobash 3.02, which is:"
print_screen_output "Copyright (C) 2005-2007 Michiel de Boer a.k.a. locsmif"
print_screen_output "Subsequent changes and modifications (after Infobash 3.02) are:"
- print_screen_output "Copyright (C) 2008-10 Scott Rogers, Harald Hope, aka trash80 & h2"
- print_screen_output ""
+ print_screen_output "Copyright (C) 2008-$(date +%y) Scott Rogers, Harald Hope, aka trash80 & h2"
+ print_screen_output " "
print_screen_output "This program is free software; you can redistribute it and/or modify"
print_screen_output "it under the terms of the GNU General Public License as published by"
print_screen_output "the Free Software Foundation; either version 3 of the License, or"
local b_non_native_app='false' pppid='' app_working_name=''
local b_qt4_konvi='false'
- if tty >/dev/null;then
+ if [[ $B_RUNNING_IN_SHELL == 'true' ]];then
IRC_CLIENT='Shell'
unset IRC_CLIENT_VERSION
- B_RUNNING_IN_SHELL='true'
elif [[ -n $PPID && -f /proc/$PPID/exe ]];then
+ if [[ $B_OVERRIDE_FILTER != 'true' ]];then
+ B_OUTPUT_FILTER='true'
+ fi
irc_client_path=$( readlink /proc/$PPID/exe )
irc_client_path_lower=$( tr '[:upper:]' '[:lower:]' <<< $irc_client_path )
app_working_name=$( basename $irc_client_path_lower )
# from inside itself, as a script, the parent is konversation/xchat, not perl/bash etc
# note: perl can report as: perl5.10.0, so it needs wildcard handling
case $app_working_name in
- bash|dash|sh|perl*) # We want to know who wrapped it into the shell or perl.
+ bash|dash|sh|python*|perl*) # We want to know who wrapped it into the shell or perl.
pppid="$( ps -p $PPID -o ppid --no-headers | sed 's/ //g' )"
if [[ -n $pppid && -f /proc/$pppid/exe ]];then
irc_client_path="$( readlink /proc/$pppid/exe )"
print a
exit
}' )"
+ B_CONSOLE_IRC='true'
IRC_CLIENT="BitchX"
;;
finch)
IRC_CLIENT_VERSION=" $( $irc_client_path -v | gawk 'NR == 1 {
print $2
}' )"
+ B_CONSOLE_IRC='true'
IRC_CLIENT="Finch"
;;
gaim)
IRC_CLIENT_VERSION=" $( $irc_client_path -v | gawk 'NR == 1 {
print $3
}' )"
+ B_CONSOLE_IRC='true'
IRC_CLIENT="ircII"
;;
irssi-text|irssi)
IRC_CLIENT_VERSION=" $( $irc_client_path -v | gawk 'NR == 1 {
print $2
}' )"
+ B_CONSOLE_IRC='true'
IRC_CLIENT="Irssi"
;;
konversation) ## konvi < 1.2 (qt4)
;;
weechat-curses)
IRC_CLIENT_VERSION=" $( $irc_client_path -v ) "
+ B_CONSOLE_IRC='true'
IRC_CLIENT="Weechat"
;;
xchat-gnome)
;;
esac
done
- if [[ -z $IRC_CLIENT_VERSION ]];then
- IRC_CLIENT="Unknown Perl client"
- fi
+ B_CONSOLE_IRC='true'
+ set_perl_python_konvi "$app_working_name"
+ ;;
+ python*)
+ # B_CONSOLE_IRC='true' # are there even any python type console irc clients? check.
+ set_perl_python_konvi "$app_working_name"
;;
# then unset, set unknown data
*)
else
## lets look to see if qt4_konvi is the parent. There is no direct way to tell, so lets infer it.
## because $PPID does not work with qt4_konvi, the above case does not work
+ if [[ $B_OVERRIDE_FILTER != 'true' ]];then
+ B_OUTPUT_FILTER='true'
+ fi
b_qt4_konvi=$( is_this_qt4_konvi )
if [[ $b_qt4_konvi == 'true' ]];then
KONVI=3
unset IRC_CLIENT_VERSION
fi
fi
+
log_function_data "IRC_CLIENT: $IRC_CLIENT :: IRC_CLIENT_VERSION: $IRC_CLIENT_VERSION :: PPID: $PPID"
eval $LOGFE
}
+# args: $1 - app_working_name
+set_perl_python_konvi()
+{
+ if [[ -z $IRC_CLIENT_VERSION ]];then
+ # this is a hack to try to show konversation if inxi is running but started via /cmd
+ if [[ -n $( ps aux | grep -i 'konversation' | grep -v 'grep' ) && $B_RUNNING_IN_X == 'true' ]];then
+ IRC_CLIENT='Konversation'
+ IRC_CLIENT_VERSION=" $( konversation --version 2>/dev/null | gawk '/^Konversation/ {print $2}' )"
+ B_CONSOLE_IRC='false'
+ else
+ IRC_CLIENT="Unknown $1 client"
+ fi
+ fi
+}
## try to infer the use of Konversation >= 1.2, which shows $PPID improperly
## no known method of finding Kovni >= 1.2 as parent process, so we look to see if it is running,
if [[ ${konvi[2]} == 'konversation' ]];then
konvi_qt4_ver=$( konversation -v | grep -i 'konversation' )
- konvi_qt4_client=$( echo "$konvi_qt4_ver" | gawk '{ print $2 }' )
+ # note: we need to change this back to a single dot number, like 1.3, not 1.3.2
+ konvi_qt4_client=$( echo "$konvi_qt4_ver" | gawk '{ print $2 }' | cut -d '.' -f 1,2 )
if [[ $konvi_qt4_client > 1.1 ]]; then
b_is_qt4='true'
konvi_qt4="qt3"
b_is_qt4='false'
fi
-
+ log_function_data "b_is_qt4: $b_is_qt4"
echo $b_is_qt4
## for testing this module
#qdbus org.kde.konversation /irc say $1 $2 "getpid_dir: $konvi_qt4 qt4_konvi: $konvi_qt4_ver verNum: $konvi_qt4_ver_num pid: $konvi_pid ppid: $PPID konvi_home_dir: ${konvi[2]}"
get_audio_data()
{
eval $LOGFS
- local i='' alsa_data='' alsa_driver='' device_count='' lsusb_path=''
- local usb_proc_file='' array_count='' usb_id='' usb_data=''
+ local i='' alsa_data='' alsa_driver='' device_count='' temp_array=''
IFS=$'\n'
# this first step handles the drivers for cases where the second step fails to find one
- device_count=$( echo "$Lspci_Data" | egrep -ic '(multimedia audio controller|audio device)' )
+ device_count=$( echo "$Lspci_Data" | grep -iEc '(multimedia audio controller|audio device)' )
if [[ $device_count -eq 1 ]] && [[ $B_ASOUND_DEVICE_FILE == 'true' ]];then
alsa_driver=$( gawk -F ']: ' '
BEGIN {
}
# filtering out modems and usb devices like webcams, this might get a
# usb audio card as well, this will take some trial and error
- $0 !~ /modem/ || $0 !~ /usb/ {
+ $0 !~ /modem|usb|webcam/ {
driver=gensub( /^(.+)( - )(.+)$/, "\\1", 1, $2 )
gsub(/^ +| +$/,"",driver)
if ( driver != "" ){
print driver
}
- }' $FILE_ASOUND_DEVICE )
+ }' $FILE_ASOUND_DEVICE )
log_function_data 'cat' "$FILE_ASOUND_DEVICE"
fi
IGNORECASE=1
}
/multimedia audio controller|audio device/ {
- audioCard=gensub(/^[0-9a-f:.]+ [^:]+: (.+)$/,"\\1","g",$0)
+ audioCard=gensub(/^[0-9a-f:\.]+ [^:]+: (.+)$/,"\\1","g",$0)
# The doublequotes are necessary because of the pipes in the variable.
gsub(/'"$BAN_LIST_NORMAL"'/, "", audioCard)
gsub(/,/, " ", audioCard)
if ( card != "" ){
print card","driver
}
- }' $FILE_ASOUND_DEVICE ) )
+ }' $FILE_ASOUND_DEVICE ) )
fi
-
- # alsa usb detection by damentz
- # for every sound card symlink in /proc/asound - display information about it
- lsusb_path=$( type -p lsusb )
- for usb_proc_file in /proc/asound/*
- do
- # if lsusb exists, the file is a symlink, and contains an important usb exclusive file: continue
- if [[ -n $lsusb_path && -L $usb_proc_file && -e $usb_proc_file/usbid ]]; then
- # send error messages of lsusb to /dev/null as it will display a bunch if not a super user
- # also, find the contents of usbid in lsusb and print everything after the 7th word on the
- # corresponding line. Finally, strip out commas as they will change the driver :)
- usb_id=$( cat $usb_proc_file/usbid )
- usb_data=$( $lsusb_path -v 2>/dev/null | grep "$usb_id" )
- log_function_data 'raw' "usb_data:\n$usb_data"
- usb_data=$( gawk '{
- gsub( /,/, " ", $0 )
- for( i=7; i <= NF; i++ ) {
- printf( $i " " )
- }
- }' <<< "$usb_data" )
- # this method is interesting, it shouldn't work but it does
- #A_AUDIO_DATA=( "${A_AUDIO_DATA[@]}" "$usb_data,snd-usb-audio,," )
- # but until we learn why the above worked, I'm using this one, which is safer
- if [[ -n $usb_data ]];then
- array_count=${#A_AUDIO_DATA[@]}
- A_AUDIO_DATA[$array_count]="$usb_data,snd-usb-audio,,"
- fi
- fi
- done
IFS="$ORIGINAL_IFS"
-
+ get_audio_usb_data
# handle cases where card detection fails, like in PS3, where lspci gives no output, or headless boxes..
if [[ ${#A_AUDIO_DATA[@]} -eq 0 ]];then
A_AUDIO_DATA[0]='Failed to Detect Sound Card!'
fi
- log_function_data "A_AUDIO_DATA: ${A_AUDIO_DATA[@]}"
+ temp_array=${A_AUDIO_DATA[@]}
+ log_function_data "A_AUDIO_DATA: $temp_array"
+
+ eval $LOGFE
+}
+# alsa usb detection by damentz
+
+get_audio_usb_data()
+{
+ eval $LOGFS
+ local usb_proc_file='' array_count='' usb_data='' usb_id='' lsusb_path='' lsusb_data=''
+ local temp_array=''
+
+ IFS=$'\n'
+ lsusb_path=$( type -p lsusb )
+ if [[ -n $lsusb_path ]];then
+ lsusb_data=$( $lsusb_path 2>/dev/null )
+ fi
+ log_function_data 'raw' "usb_data:\n$lsusb_data"
+ if [[ -n $lsusb_data ]];then
+ # for every sound card symlink in /proc/asound - display information about it
+ for usb_proc_file in /proc/asound/*
+ do
+ # If the file is a symlink, and contains an important usb exclusive file: continue
+ if [[ -L $usb_proc_file && -e $usb_proc_file/usbid ]]; then
+ # find the contents of usbid in lsusb and print everything after the 7th word on the
+ # corresponding line. Finally, strip out commas as they will change the driver :)
+ usb_id=$( cat $usb_proc_file/usbid )
+ usb_data=$( grep "$usb_id" <<< "$lsusb_data" )
+ if [[ -n $usb_data && -n $usb_id ]];then
+ usb_data=$( gawk '
+ BEGIN {
+ IGNORECASE=1
+ string=""
+ separator=""
+ }
+ {
+ gsub( /,/, " ", $0 )
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $0)
+ gsub(/ [ \t]+/, " ", $0)
+ for ( i=7; i<= NF; i++ ) {
+ string = string separator $i
+ separator = " "
+ }
+ if ( $6 != "" ){
+ print string ",USB Audio,,," $6
+ }
+ }' <<< "$usb_data" )
+ fi
+ # this method is interesting, it shouldn't work but it does
+ #A_AUDIO_DATA=( "${A_AUDIO_DATA[@]}" "$usb_data,USB Audio,," )
+ # but until we learn why the above worked, I'm using this one, which is safer
+ if [[ -n $usb_data ]];then
+ array_count=${#A_AUDIO_DATA[@]}
+ A_AUDIO_DATA[$array_count]="$usb_data"
+ fi
+ fi
+ done
+ fi
+ IFS="$ORIGINAL_IFS"
+ temp_array=${A_AUDIO_DATA[@]}
+ log_function_data "A_AUDIO_DATA: $temp_array"
+
eval $LOGFE
}
get_audio_alsa_data()
{
eval $LOGFS
- local alsa_data=''
+ local alsa_data='' temp_array=''
# now we'll get the alsa data if the file exists
if [[ $B_ASOUND_VERSION_FILE == 'true' ]];then
- alsa_data=$( gawk '
+ IFS=","
+ A_ALSA_DATA=( $(
+ gawk '
BEGIN {
IGNORECASE=1
+ alsa=""
+ version=""
}
# some alsa strings have the build date in (...)
# remove trailing . and remove possible second line if compiled by user
$0 !~ /compile/ {
- gsub( "Driver | [(].*[)]|\.$","",$0 )
+ gsub( /Driver | [(].*[)]|\.$/,"",$0 )
gsub(/,/, " ", $0)
gsub(/^ +| +$/, "", $0)
gsub(/ [ \t]+/, " ", $0)
- if ( $0 != "" ){
- print $0
+ sub(/Advanced Linux Sound Architecture/, "ALSA", $0)
+ if ( $1 == "ALSA" ){
+ alsa=$1
}
- }' $FILE_ASOUND_VERSION )
+ version=$NF
+ print alsa "," version
+ }' $FILE_ASOUND_VERSION
+ ) )
+ IFS="$ORIGINAL_IFS"
log_function_data 'cat' "$FILE_ASOUND_VERSION"
fi
- echo "$alsa_data"
- log_function_data "alsa_data: $alsa_data"
+ temp_array=${A_ALSA_DATA[@]}
+ log_function_data "A_ALSA_DATA: $temp_array"
+ eval $LOGFE
+}
+
+get_console_irc_tty()
+{
+ eval $LOGFS
+ local tty_number=''
+ if [[ -n ${IRC_CLIENT} ]];then
+ tty_number=$( ps aux | gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ /'${IRC_CLIENT}'/ {
+ gsub(/[^0-9]/, "", $7)
+ print $7
+ }' )
+ fi
+ log_function_data "tty_number: $tty_number"
+ echo $tty_number
eval $LOGFE
}
# A_CPU_CORE_DATA=( "$cpu_core_count" "$cpu_alpha_count Core$cpu_type" )
A_CPU_CORE_DATA=( "$cpu_physical_count" "$cpu_alpha_count" "$cpu_type" "$cpu_core_count" )
fi
- log_function_data "A_CPU_CORE_DATA: ${A_CPU_CORE_DATA[@]}"
+ temp_array=${A_CPU_CORE_DATA[@]}
+ log_function_data "A_CPU_CORE_DATA: $temp_array"
eval $LOGFE
}
get_cpu_data()
{
eval $LOGFS
- local i='' j='' cpu_array_nu='' a_cpu_working='' multi_cpu='' bits=''
+ local i='' j='' cpu_array_nu='' a_cpu_working='' multi_cpu='' bits='' temp_array=''
if [[ $B_CPUINFO_FILE == 'true' ]];then
# stop script for a bit to let cpu slow down before parsing cpu /proc file
}' $FILE_CPUINFO ) )
log_function_data 'cat' "$FILE_CPUINFO"
fi
-
IFS="$ORIGINAL_IFS"
- log_function_data "A_CPU_DATA: ${A_CPU_DATA[@]}"
+ temp_array=${A_CPU_DATA[@]}
+ log_function_data "A_CPU_DATA: $temp_array"
+
eval $LOGFE
# echo getMainCpu: ${[@]}
}
{
eval $LOGFS
# in /proc/cpuinfo
-
+ local temp_array=''
if [[ $B_CPUINFO_FILE == 'true' ]]; then
A_CPU_TYPE_PCNT_CCNT=( $(
num_of_cores = 0
num_of_processors = 0
num_of_cpus = 0
+ cpu_core_count = 0
core_id[0]
processor_id[0]
cpu_id[0]
core_id[iter] = $NF
iter++
}
+ # this will be used to fix an intel glitch if needed, cause, intel
+ # sometimes reports core id as the same number for each core, 0
+ # so if cpu cores shows greater value than number of cores, use this
+ /^cpu cores/ {
+ cpu_core_count = $NF
+ }
END {
## Look thru the array and filter same numbers.
## only unique numbers required
i = 0
## count unique processors ##
+ # note, this fails for intel cpus at times
for ( i in processor_id ) {
procHolder[processor_id[i]] = 1
}
- for ( i in procHolder ) {
+ for ( i in procHolder ) {
num_of_processors++
}
for ( i in coreHolder ) {
num_of_cores++
}
+ # final check, override the num of cores value if it clearly is wrong
+ # and use the raw core count and synthesize the total instead of real count
+ if ( ( num_of_cores == 1 ) && ( cpu_core_count * num_of_cpus > 1 ) ) {
+ num_of_cores = cpu_core_count * num_of_cpus
+ }
####################################################################
# algorithm
' $FILE_CPUINFO
) )
fi
- log_function_data "A_CPU_TYPE_PCNT_CCNT: ${A_CPU_TYPE_PCNT_CCNT[@]}"
+ temp_array=${A_CPU_TYPE_PCNT_CCNT[@]}
+ log_function_data "A_CPU_TYPE_PCNT_CCNT: $temp_array"
+ eval $LOGFE
+}
+
+# Detect desktop environment in use, initial rough logic from: compiz-check
+# http://forlong.blogage.de/entries/pages/Compiz-Check
+get_desktop_environment()
+{
+ eval $LOGFS
+
+ # set the default, this function only runs in X, if null, don't print data out
+ local desktop_environment='' xprop_root='' ps_aux=''
+ local version='' version_data='' toolkit=''
+
+ # note, GNOME_DESKTOP_SESSION_ID is deprecated so we'll see how that works out
+ # https://bugzilla.gnome.org/show_bug.cgi?id=542880
+ if [[ -n $GNOME_DESKTOP_SESSION_ID ]]; then
+ version=$( get_de_app_version 'gnome-about' 'gnome' '3' )
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ # this is a hack, and has to be changed with every toolkit version change
+ toolkit=$( pkg-config --modversion gtk+-3.0 2>/dev/null )
+ if [[ -z $toolkit ]];then
+ toolkit=$( pkg-config --modversion gtk+-2.0 2>/dev/null )
+ fi
+ if [[ -n $toolkit ]];then
+ version="$version (Gtk $toolkit)"
+ fi
+ fi
+ desktop_environment="Gnome"
+ # assume 5 will id the same, why not, no need to update in future
+ elif [[ $KDE_SESSION_VERSION == '5' ]]; then
+ version_data=$( kded5 --version 2>/dev/null )
+ version=$( grep -si '^KDE Development Platform:' <<< "$version_data" | gawk '{print $4}' )
+ if [[ -z $version ]];then
+ version='5'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ toolkit=$( grep -si '^Qt:' <<< "$version_data" | gawk '{print $2}' )
+ if [[ -n $toolkit ]];then
+ version="$version (Qt $toolkit)"
+ fi
+ fi
+ desktop_environment="KDE"
+ elif [[ $KDE_SESSION_VERSION == '4' ]]; then
+ version_data=$( kded4 --version 2>/dev/null )
+ version=$( grep -si '^KDE Development Platform:' <<< "$version_data" | gawk '{print $4}' )
+ if [[ -z $version ]];then
+ version='4'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ toolkit=$( grep -si '^Qt:' <<< "$version_data" | gawk '{print $2}' )
+ if [[ -n $toolkit ]];then
+ version="$version (Qt $toolkit)"
+ fi
+ fi
+ desktop_environment="KDE"
+ # KDE_FULL_SESSION property is only available since KDE 3.5.5.
+ # src: http://humanreadable.nfshost.com/files/startkde
+ elif [[ $KDE_FULL_SESSION == 'true' ]]; then
+ version_data=$( kded --version 2>/dev/null )
+ version=$( grep -si '^KDE:' <<< "$version_data" | gawk '{print $2}' )
+ # version=$( get_de_app_version 'kded' '^KDE:' '2' )
+ if [[ -z $version ]];then
+ version='3.5'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ toolkit=$( grep -si '^Qt:' <<< "$version_data" | gawk '{print $2}' )
+ if [[ -n $toolkit ]];then
+ version="$version (Qt $toolkit)"
+ fi
+ fi
+ desktop_environment="KDE"
+ # now that the primary ones have been handled, next is to find the ones with unique
+ # xprop detections possible
+ else
+ ps_aux="$( ps aux )"
+ if [[ -n $( type -p xprop ) ]];then
+ xprop_root="$( xprop -root 2>/dev/null )"
+ # String: "This is xfdesktop version 4.2.12"
+ if [[ -n $( grep -Eis '\"xfce4\"' <<< "$xprop_root" ) ]];then
+ version=$( get_de_app_version 'xfdesktop' 'xfdesktop[[:space:]]version' '5' )
+ if [[ -z $version ]];then
+ version='4'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ toolkit=$( get_de_app_version 'xfdesktop' 'Built[[:space:]]with[[:space:]]GTK' '4' )
+ if [[ -n $toolkit ]];then
+ version="$version (Gtk $toolkit)"
+ fi
+ fi
+ desktop_environment="Xfce"
+ # when 5 is released, the string may need updating
+ elif [[ -n $( grep -is '\"xfce5\"' <<< "$xprop_root" ) ]];then
+ version=$( get_de_app_version 'xfdesktop' 'xfdesktop[[:space:]]version' '5' )
+ if [[ -z $version ]];then
+ version='5'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ toolkit=$( get_de_app_version 'xfdesktop' 'Built[[:space:]]with[[:space:]]GTK' '4' )
+ if [[ -n $toolkit ]];then
+ version="$version (Gtk $toolkit)"
+ fi
+ fi
+ desktop_environment="Xfce"
+ elif [[ -n $( grep -is 'BLACKBOX_PID' <<< "$xprop_root" ) ]];then
+ if [[ -n $( grep -is 'fluxbox' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'fluxbox' '^fluxbox' '2' )
+ desktop_environment='Fluxbox'
+ else
+ desktop_environment='Blackbox'
+ fi
+ elif [[ -n $( grep -is 'OPENBOX_PID' <<< "$xprop_root" ) ]];then
+ version=$( get_de_app_version 'openbox' '^openbox' '2' )
+ if [[ -n $( grep -is 'lxde' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ if [[ -n $version ]];then
+ version="(Openbox $version)"
+ fi
+ desktop_environment='LXDE'
+ else
+ desktop_environment='Openbox'
+ fi
+ elif [[ -n $( grep -is 'ICEWM' <<< "$xprop_root" ) ]];then
+ version=$( get_de_app_version 'icewm' '^icewm' '2' )
+ desktop_environment='IceWM'
+ elif [[ -n $( grep -is 'ENLIGHTENMENT' <<< "$xprop_root" ) ]];then
+ # no -v or --version but version is in xprop -root
+ # ENLIGHTENMENT_VERSION(STRING) = "Enlightenment 0.16.999.49898"
+ version=$( grep -is 'ENLIGHTENMENT_VERSION' <<< "$xprop_root" | cut -d '"' -f 2 | gawk '{print $2}' )
+ desktop_environment='Enlightenment'
+ fi
+ fi
+ # a few manual hacks for things that don't id with xprop, these are just good guesses
+ # note that gawk is going to exit after first occurance of search string, so no need for extra
+ if [[ -z $desktop_environment ]];then
+ if [[ -n $( grep -is 'fvwm-crystal' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'fvwm' '^fvwm' '2' )
+ desktop_environment='FVWM-Crystal'
+ elif [[ -n $( grep -is 'fvwm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'fvwm' '^fvwm' '2' )
+ desktop_environment='FVWM'
+ elif [[ -n $( grep -is 'pekwm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'pekwm' '^pekwm' '3' )
+ desktop_environment='pekwm'
+ elif [[ -n $( grep -is 'awesome' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'awesome' '^awesome' '2' )
+ desktop_environment='Awesome'
+ elif [[ -n $( grep -is 'scrotwm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'scrotwm' '^welcome.*scrotwm' '4' )
+ desktop_environment='Scrotwm' # no --version for this one
+ elif [[ -n $( grep -Eis '([[:space:]]|/)twm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ desktop_environment='Twm' # no --version for this one
+ elif [[ -n $( grep -Eis '([[:space:]]|/)dwm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'dwm' '^dwm' '1' )
+ desktop_environment='dwm'
+ elif [[ -n $( grep -is 'wmii' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'wmii' '^wmii' '1' )
+ desktop_environment='wmii'
+ elif [[ -n $( grep -Eis '([[:space:]]|/)jwm' <<< "$ps_aux" | grep -v 'grep' ) ]];then
+ version=$( get_de_app_version 'jwm' '^jwm' '2' )
+ desktop_environment='JWM'
+ fi
+ fi
+ fi
+ if [[ -n $version ]];then
+ version=" $version"
+ fi
+ echo "$desktop_environment${version}"
eval $LOGFE
}
+# note: gawk doesn't support white spaces in search string, gave errors, so use [[:space:]] instead
+# args: $1 - desktop command for --version; $2 - search string; $3 - gawk print number
+get_de_app_version()
+{
+ local version_data='' version='' get_version='--version'
+
+ case $1 in
+ dwm|jwm|wmii)
+ get_version='-v'
+ ;;
+ esac
+ # note, some wm send version info to stderr instead of stdout
+ case $1 in
+ dwm|scrotwm)
+ version_data="$( $1 $get_version 2>&1 )"
+ ;;
+ *)
+ version_data="$( $1 $get_version 2>/dev/null )"
+ ;;
+ esac
+
+ if [[ -n $version_data ]];then
+ version=$( gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ /'$2'/ {
+ # sample: dwm-5.8.2, ©.. etc, why no space? who knows. Also get rid of v in number string
+ # xfce, and other, output has , in it, so dump all commas
+ gsub(/(,|dwm-|wmii-|v|V)/, "",$'$3')
+ print $'$3'
+ exit # quit after first match prints
+ }' <<< "$version_data" )
+ fi
+ echo $version
+}
+
# for more on distro id, please reference this python thread: http://bugs.python.org/issue1322
## return distro name/id if found
get_distro_data()
log_function_data "distro_file: $distro_file"
# first test for the legacy antiX distro id file
if [[ -e /etc/antiX ]];then
- distro="$( egrep -oi 'antix.*\.iso' <<< $( remove_erroneous_chars '/etc/antiX' ) | sed 's/\.iso//' )"
+ distro="$( grep -Eoi 'antix.*\.iso' <<< $( remove_erroneous_chars '/etc/antiX' ) | sed 's/\.iso//' )"
# this handles case where only one release/version file was found, and it's lsb-release. This would
# never apply for ubuntu or debian, which will filter down to the following conditions. In general
# if there's a specific distro release file available, that's to be preferred, but this is a good backup.
if [[ -z $distro ]] && [[ $B_LSB_FILE == 'true' ]];then
distro=$( get_distro_lsb_data )
fi
- ## finally, if all else has failed, give up
+ # now some final null tries
if [[ -z $distro ]];then
- distro='Unknown distro o_O'
+ # if the file was null but present, which can happen in some cases, then use the file name itself to
+ # set the distro value. Why say unknown if we have a pretty good idea, after all?
+ if [[ -n $distro_file ]] && [[ " $DISTROS_DERIVED $DISTROS_PRIMARY " == *" $distro_file "* ]];then
+ distro=$( sed -E -e 's/[-_]//' -e 's/(release|version)//' <<< $distro_file | sed -E 's/^([a-z])/\u\1/' )
+ fi
+ ## finally, if all else has failed, give up
+ if [[ -z $distro ]];then
+ distro='unknown'
+ fi
fi
# this handles an arch bug where /etc/arch-release is empty and /etc/issue is corrupted
distroCodename = $NF " "
}
}
+ # sometimes some distros cannot do their lsb-release files correctly, so here is
+ # one last chance to get it right.
+ /^DISTRIB_DESCRIPTION/ {
+ gsub(/^ +| +$/, "", $0)
+ if ( $NF != "n/a" ) {
+ # slice out the part inside "", like: DISTRIB_DESCRIPTION="Arch Linux"
+ gsub(/DISTRIB_DESCRIPTION=|"/,"",$0)
+ distroDescription = $0
+ }
+ }
END {
- print distroId distroRelease distroCodename
- }' $FILE_LSB_RELEASE )
+ fullString=""
+ if ( distroId == "" && distroRelease == "" && distroCodename == "" && distroDescription != "" ){
+ fullString = distroDescription
+ }
+ else {
+ fullString = distroId distroRelease distroCodename
+ }
+ print fullString
+ }
+ ' $FILE_LSB_RELEASE )
log_function_data 'cat' "$FILE_LSB_RELEASE"
fi
# this is HORRIBLY slow, but I don't know why, it runs fast in shell
eval $LOGFE
}
+get_gcc_kernel_version()
+{
+ # note that we use gawk to get the last part because beta, alpha, git versions can be non-numeric
+ local gccVersion=$( grep -Eio 'gcc[[:space:]]*version[[:space:]]*([^ \t]*)' /proc/version 2>/dev/null | gawk '{print $3}' )
+ echo $gccVersion
+}
+
+get_gcc_system_version()
+{
+ eval $LOGFS
+ local separator='' gcc_installed='' gcc_list='' gcc_others='' temp_array=''
+ local gcc_version=$(
+ gcc --version 2>/dev/null | sed -E 's/\([^\)]*\)//g' | gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ /^gcc/ {
+ print $2
+ exit
+ }'
+ )
+
+ # can't use xargs -l basename because not all systems support thats
+ if [[ $B_EXTRA_EXTRA_DATA == 'true' ]];then
+ gcc_others=$( ls /usr/bin/gcc-* 2>/dev/null )
+ if [[ -n $gcc_others ]];then
+ for item in $gcc_others
+ do
+ gcc_installed=$( basename $item | gawk -F '-' '
+ $2 ~ /^[0-9\.]+$/ {
+ print $2
+ }' )
+ if [[ -n $gcc_installed && -z $( grep "^$gcc_installed" <<< $gcc_version ) ]];then
+ gcc_list=$gcc_list$separator$gcc_installed
+ separator=','
+ fi
+ done
+ fi
+ fi
+ if [[ -n $gcc_version ]];then
+ A_GCC_VERSIONS=( "$gcc_version" $gcc_list )
+ fi
+ temp_array=${A_GCC_VERSIONS[@]}
+ log_function_data "A_GCC_VERSIONS: $temp_array"
+ eval $LOGFE
+}
get_gpu_temp_data()
{
local gpu_temp='' gpu_fan='' screens='' screen_nu='' gpu_temp_looper=''
print gpuTemp
}'
)
+ # this handles some newer cases of free driver temp readouts, will require modifications as
+ # more user data appears.
+ elif [[ -n $Sensors_Data ]];then
+ gpu_temp=$(
+ gawk '
+ BEGIN {
+ IGNORECASE=1
+ gpuTemp=""
+ separator=""
+ }
+ /^('"$SENSORS_GPU_SEARCH"')-pci/ {
+ while ( getline && !/^$/ ) {
+ if ( /^temp/ ) {
+ sub(/^[[:alnum:]]*.*:/, "", $0 ) # clear out everything to the :
+ gsub(/[\+ \t°]/, "", $1) # ° is a special case, like a space for gawk
+ gpuTemp=gpuTemp separator $1
+ separator=","
+ }
+ }
+ }
+ END {
+ print gpuTemp
+ }' <<< "$Sensors_Data"
+ )
fi
if [[ -n $gpu_temp ]];then
fi
}
+## for possible future data, not currently used
+get_graphics_agp_data()
+{
+ eval $LOGFS
+ local agp_module=''
+
+ if [[ $B_MODULES_FILE == 'true' ]];then
+ ## not used currently
+ agp_module=$( gawk '
+ /agp/ && !/agpgart/ && $3 > 0 {
+ print(gensub(/(.*)_agp.*/,"\\1","g",$1))
+ }' $FILE_MODULES )
+ log_function_data 'cat' "$FILE_MODULES"
+ fi
+ log_function_data "agp_module: $agp_module"
+ eval $LOGFE
+}
+
## create array of gfx cards installed on system
get_graphics_card_data()
{
eval $LOGFS
- local i=''
+ local i='' temp_array=''
IFS=$'\n'
- A_GFX_CARD_DATA=( $( echo "$Lspci_Data" | gawk -F': ' '
+ A_GFX_CARD_DATA=( $( gawk -F': ' '
BEGIN {
IGNORECASE=1
+ busId=""
}
/vga compatible controller/ {
gsub(/'"$BAN_LIST_NORMAL"'/, "", $NF)
gsub(/,/, " ", $NF)
gsub(/^ +| +$/, "", $NF)
gsub(/ [ \t]+/, " ", $NF)
- print $NF
- }' ) )
+ busId=gensub(/^([0-9a-f:\.]+) (.+)$/,"\\1","",$1)
+ print $NF "," busId
+ }' <<< "$Lspci_Data" ) )
IFS="$ORIGINAL_IFS"
# for (( i=0; i < ${#A_GFX_CARD_DATA[@]}; i++ ))
# do
# A_GFX_CARD_DATA[i]=$( sanitize_characters BAN_LIST_NORMAL "${A_GFX_CARD_DATA[i]}" )
# done
- # handle cases where card detection fails, like in PS3, where lspci gives no output, or headless boxes..
- if [[ ${#A_GFX_CARD_DATA[@]} -eq 0 ]];then
- A_GFX_CARD_DATA[0]='Failed to Detect Video Card!'
+
+ # GFXMEM is UNUSED at the moment, because it shows AGP aperture size, which is not necessarily equal to GFX memory..
+ # GFXMEM="size=[$(echo "$Lspci_Data" | gawk '/VGA/{while (!/^$/) {getline;if (/size=[0-9][0-9]*M/) {size2=gensub(/.*\[size=([0-9]+)M\].*/,"\\1","g",$0);if (size<size2){size=size2}}}}END{print size2}')M]"
+ temp_array=${A_GFX_CARD_DATA[@]}
+ log_function_data "A_GFX_CARD_DATA: $temp_array"
+ eval $LOGFE
+}
+
+get_graphics_driver()
+{
+ eval $LOGFS
+
+ # list is from sgfxi plus non-free drivers
+ local driver_list='apm|ark|ati|chips|cirrus|cyrix|fbdev|fglrx|glint|i128|i740|intel|i810|imstt|mach64|mga|neomagic|nsc|nv|nvidia|openchrome|nouveau|radeon|radeonhd|rendition|s3|s3virge|savage|siliconmotion|sis|sisusb|tdfx|tga|trident|tseng|unichrome|vboxvideo|vesa|vga|via|voodoo|vmware|v4l'
+ local driver='' driver_string='' xorg_log_data='' status='' temp_array=''
+
+ if [[ $B_XORG_LOG == 'true' ]];then
+ A_GRAPHIC_DRIVERS=( $(
+ gawk '
+ BEGIN {
+ driver=""
+ }
+ /[[:space:]]Loading.*('"$driver_list"')_drv.so$/ {
+ driver=gensub(/.*[[:space:]]Loading.*('"$driver_list"')_drv.so/, "\\1", 1, $0 )
+ # we get all the actually loaded drivers first, we will use this to compare the
+ # failed/unloaded, which have not always actually been truly loaded
+ aDrivers[driver]="loaded"
+ }
+ /Unloading[[:space:]].*('"$driver_list"')(|_drv.so)$/ {
+ driver=gensub(/(.*)Unloading[[:space:]].*('"$driver_list"')(|_drv.so)$/, "\\2", 1, $0 )
+ # we need to make sure that the driver has already been truly loaded, not just discussed
+ if ( driver in aDrivers ) {
+ aDrivers[driver]="unloaded"
+ }
+ }
+ /Failed.*('"$driver_list"')_drv.so|Failed.*\"('"$driver_list"')\"/ {
+ driver=gensub(/(.*)Failed.*('"$driver_list"')_drv.so/, "\\2", 1, $0 )
+ if ( driver == $0 ) {
+ driver=gensub(/(.*)Failed.*\"('"$driver_list"')\".*|fred/, "\\2", 1, $0 )
+ }
+ # we need to make sure that the driver has already been truly loaded, not just discussed
+ if ( driver != $0 && driver in aDrivers ) {
+ aDrivers[driver]="failed"
+ }
+ }
+ END {
+ for ( driver in aDrivers ) {
+ print driver "," aDrivers[driver]
+ }
+ }' < $FILE_XORG_LOG
+ ) )
fi
-
- # GFXMEM is UNUSED at the moment, because it shows AGP aperture size, which is not necessarily equal to GFX memory..
- # GFXMEM="size=[$(echo "$Lspci_Data" | gawk '/VGA/{while (!/^$/) {getline;if (/size=[0-9][0-9]*M/) {size2=gensub(/.*\[size=([0-9]+)M\].*/,"\\1","g",$0);if (size<size2){size=size2}}}}END{print size2}')M]"
- log_function_data "A_GFX_CARD_DATA: ${A_GFX_CARD_DATA[@]}"
+ temp_array=${A_GRAPHIC_DRIVERS[@]}
+ log_function_data "A_GRAPHIC_DRIVERS: $temp_array"
+
eval $LOGFE
}
get_graphics_glx_data()
{
eval $LOGFS
- if [[ $B_X_RUNNING == 'true' && $B_ROOT != 'true' ]];then
+ local temp_array=''
+ if [[ $B_SHOW_X_DATA == 'true' && $B_ROOT != 'true' ]];then
IFS=$'\n'
A_GLX_DATA=( $( glxinfo | gawk -F ': ' '
# note: function declarations go before BEGIN? It appears so, confirm.
IGNORECASE=1
}
/opengl renderer/ {
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $2)
+ gsub(/ [ \t]+/, " ", $2) # get rid of the created white spaces
+ gsub(/^ +| +$/, "", $2)
if ( $2 ~ /mesa/ ) {
# Allow all mesas
# if ( $2 ~ / r[3-9][0-9][0-9] / ) {
- gsub(/'"$BAN_LIST_NORMAL"'/, "", $2)
a[$2]
# this counter failed in one case, a bug, and is not needed now
# f++
# }
next
}
+
$2 && a[$2]
}
# dropping all conditions from this test to just show full mesa information
# there is a user case where not f and mesa apply, atom mobo
# /opengl version/ && ( f || $2 !~ /mesa/ ) {
/opengl version/ {
+ # fglrx started appearing with this extra string, does not appear to communicate anything of value
+ sub(/Compatibility Profile Context/, "- CPC", $2 )
+ gsub(/ [ \t]+/, " ", $2) # get rid of the created white spaces
+ gsub(/^ +| +$/, "", $2)
$2 && b[$2]
}
/direct rendering/ {
# GLXR=$(glxinfo | gawk -F ': ' 'BEGIN {IGNORECASE=1} /opengl renderer/ && $2 !~ /mesa/ {seen[$2]++} END {for (i in seen) {printf("%s ",i)}}')
# GLXV=$(glxinfo | gawk -F ': ' 'BEGIN {IGNORECASE=1} /opengl version/ && $2 !~ /mesa/ {seen[$2]++} END {for (i in seen) {printf("%s ",i)}}')
fi
- log_function_data "A_GLX_DATA: ${A_GLX_DATA[@]}"
+ temp_array=${A_GLX_DATA[@]}
+ log_function_data "A_GLX_DATA: $temp_array"
eval $LOGFE
}
get_graphics_res_data()
{
eval $LOGFS
- local screen_resolution=''
+ local screen_resolution='' xdpy_data='' screens_count=0
- if [[ $B_X_RUNNING == 'true' && $B_ROOT != 'true' ]];then
+ if [[ $B_SHOW_X_DATA == 'true' && $B_ROOT != 'true' ]];then
# Added the two ?'s , because the resolution is now reported without spaces around the 'x', as in
# 1400x1050 instead of 1400 x 1050. Change as of X.org version 1.3.0
- screen_resolution=$( xrandr | gawk '
- /\*/ {
- res[++m] = gensub(/^.* ([0-9]+) ?x ?([0-9]+)[_ ].* ([0-9\.]+)\*.*$/,"\\1x\\2@\\3hz","g",$0)
- }
- END {
- for (n in res) {
- if (res[n] ~ /^[[:digit:]]+x[[:digit:]]+/) {
- line = line ? line ", " res[n] : res[n]
- }
+ xdpy_data="$( xdpyinfo )"
+ xdpy_count=$( grep -c 'dimensions' <<< "$xdpy_data" )
+ # we get a bit more info from xrandr than xdpyinfo, but xrandr fails to handle
+ # multiple screens from different video cards
+ if [[ $xdpy_count -eq 1 ]];then
+ screen_resolution=$( xrandr | gawk '
+ /\*/ {
+ res[++m] = gensub(/^.* ([0-9]+) ?x ?([0-9]+)[_ ].* ([0-9\.]+)\*.*$/,"\\1x\\2@\\3hz","g",$0)
}
- if (line) {
- print(line)
+ END {
+ for (n in res) {
+ if (res[n] ~ /^[[:digit:]]+x[[:digit:]]+/) {
+ line = line ? line ", " res[n] : res[n]
+ }
+ }
+ if (line) {
+ print(line)
+ }
+ }' )
+ fi
+ if [[ -z $screen_resolution || $xdpy_count -gt 1 ]];then
+ screen_resolution=$( gawk '
+ BEGIN {
+ IGNORECASE=1
+ screens = ""
+ separator = ""
}
- }' )
- if [[ -z $screen_resolution ]];then
- screen_resolution=$( xdpyinfo | gawk '
/dimensions/ {
- print $2
- }' )
+ screens = screens separator # first time, this is null, next, has comma last
+ screens = screens $2 # then tack on the new value for nice comma list
+ separator = ", "
+ }
+ END {
+ print screens
+ }' <<< "$xdpy_data" )
fi
else
screen_resolution=$( stty -F $( readlink /proc/$PPID/fd/0 ) size | gawk '{
eval $LOGFE
}
-## for possible future data, not currently used
-get_graphics_agp_data()
-{
- eval $LOGFS
- local agp_module=''
-
- if [[ $B_MODULES_FILE == 'true' ]];then
- ## not used currently
- agp_module=$( gawk '
- /agp/ && !/agpgart/ && $3 > 0 {
- print(gensub(/(.*)_agp.*/,"\\1","g",$1))
- }' $FILE_MODULES )
- log_function_data 'cat' "$FILE_MODULES"
- fi
- log_function_data "agp_module: $agp_module"
- eval $LOGFE
-}
-
## create array of x vendor/version data
get_graphics_x_data()
{
eval $LOGFS
- local x_vendor='' x_version=''
+ local x_vendor='' x_version='' temp_array='' xdpy_info='' a_x_working=''
- if [[ $B_X_RUNNING == 'true' && $B_ROOT != 'true' ]];then
+ if [[ $B_SHOW_X_DATA == 'true' && $B_ROOT != 'true' ]];then
# X vendor and version detection.
- x_vendor=$( xdpyinfo | gawk -F': +' '
+ # new method added since radeon and X.org and the disappearance of <X server name> version : ...etc
+ # Later on, the normal textual version string returned, e.g. like: X.Org version: 6.8.2
+ # A failover mechanism is in place. (if $x_version is empty, the release number is parsed instead)
+ # xdpy_info="$( xdpyinfo )"
+ IFS=","
+ a_x_working=( $( xdpyinfo | gawk -F': +' '
BEGIN {
IGNORECASE=1
+ vendorString=""
+ version=""
+ vendorRelease=""
}
/vendor string/ {
gsub(/the|inc|foundation|project|corporation/, "", $2)
gsub(/,/, " ", $2)
gsub(/^ +| +$/, "", $2)
gsub(/ [ \t]+/, " ", $2)
- print $2
- }' )
-
- # new method added since radeon and X.org and the disappearance of <X server name> version : ...etc
- # Later on, the normal textual version string returned, e.g. like: X.Org version: 6.8.2
- # A failover mechanism is in place. (if $x_version is empty, the release number is parsed instead)
- x_version=$( xdpyinfo | gawk '
+ vendorString = $2
+ }
/version:/ {
- print $NF
- }' )
+ version = $NF
+ }
+ /vendor release number/ {
+ gsub(/0+$/, "", $2)
+ gsub(/0+/, ".", $2)
+ vendorRelease = $2
+ }
+ END {
+ print vendorString "," version "," vendorRelease
+ }' ) )
+ x_vendor=${a_x_working[0]}
+ x_version=${a_x_working[1]}
+
# this gives better output than the failure last case, which would only show:
# for example: X.org: 1.9 instead of: X.org: 1.9.0
if [[ -z $x_version ]];then
- x_version=$( get_x_version )
+ x_version=$( get_graphics_x_version )
fi
if [[ -z $x_version ]];then
- x_version=$( xdpyinfo | gawk -F': +' '
- BEGIN {
- IGNORECASE=1
- }
- /vendor release number/ {
- gsub(/0+$/, "", $2)
- gsub(/0+/, ".", $2)
- print $2
- }' )
+ x_version=${a_x_working[2]}
fi
# some distros, like fedora, report themselves as the xorg vendor, so quick check
if [[ -z $( grep -E '(X|xorg|x\.org)' <<< $x_vendor ) ]];then
x_vendor="$x_vendor X.org"
fi
-
+ IFS="$ORIGINAL_IFS"
A_X_DATA[0]="$x_vendor"
A_X_DATA[1]="$x_version"
else
- x_version=$( get_x_version )
+ x_version=$( get_graphics_x_version )
if [[ -n $x_version ]];then
x_vendor='X.org'
A_X_DATA[0]="$x_vendor"
A_X_DATA[1]="$x_version"
fi
fi
- log_function_data "A_X_DATA: ${A_X_DATA[@]}"
+ temp_array=${A_X_DATA[@]}
+ log_function_data "A_X_DATA: $temp_array"
eval $LOGFE
}
+
# if other tests fail, try this one, this works for root, out of X also
-get_x_version()
+get_graphics_x_version()
{
eval $LOGFS
- local x_exists=$( type -p X )
- local x_version=''
-
- if [[ -n $x_exists ]];then
+ local x_version='' x_data=''
+ # note that some users can have /usr/bin/Xorg but not /usr/bin/X
+ if [[ -n $( type -p X ) ]];then
# note: MUST be this syntax: X -version 2>&1
# otherwise X -version overrides everything and this comes out null.
- # two knowns id strings: X.Org X Server 1.7.5 AND Window System Version 1.7.5
+ # two knowns id strings: X.Org X Server 1.7.5 AND X Window System Version 1.7.5
#X -version 2>&1 | gawk '/^X Window System Version/ { print $5 }'
- x_version=$( X -version 2>&1 | gawk '
+ x_data="$( X -version 2>&1 )"
+ elif [[ -n $( type -p Xorg ) ]];then
+ x_data="$( Xorg -version 2>&1)"
+ fi
+ if [[ -n $x_data ]];then
+ x_version=$(
+ gawk '
BEGIN {
IGNORECASE=1
}
- /x.org x server|X Window System Version/ {
- print $NF
- }' )
+ /^x.org x server/ {
+ print $4
+ exit
+ }
+ /^X Window System Version/ {
+ print $5
+ exit
+ }' <<< "$x_data"
+ )
fi
echo $x_version
log_function_data " x_version: $x_version"
get_hdd_data_basic()
{
eval $LOGFS
- local hdd_used=''
- local hdd_data="$( df --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 )"
+ local hdd_used='' temp_array=''
+ local hdd_data="$( df -P --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 )"
log_function_data 'raw' "hdd_data:\n$hdd_data"
hdd_used=$( echo "$hdd_data" | gawk '
# also handles odd dm-1 type, from lvm
- /^\/dev\/(mapper\/|[hs]d[a-z][0-9]+|dm[-]?[0-9]+)/ {
+ /^\/dev\/(mapper\/|[hsv]d[a-z][0-9]+|dm[-]?[0-9]+)/ {
# this handles the case where the first item is too long
# and makes df wrap output to next line, so here we advance
- # it to the next line for that single case
- if ( NF < 5 && $0 !~ /.*\%/ ) {
+ # it to the next line for that single case. Using df -P should
+ # make this unneeded but leave it in just in case
+ if ( NF < 5 && $0 !~ /.*%/ ) {
getline
}
# if the first item caused a wrap, use one less than standard
# testing for the field with % in it, ie: 34%, then go down from there
# this also protects against cases where the mount point has a space in the
# file name, thus breaking going down from $NF directly.
- if ( $4 ~ /.*\%/ ) {
+ if ( $4 ~ /.*%/ ) {
used += $2
}
# otherwise use standard
- else if ( $5 ~ /.*\%/ ) {
+ else if ( $5 ~ /.*%/ ) {
used += $3
}
# and if this is not detected, give up, we need user data to debug
if [[ $B_PARTITIONS_FILE == 'true' ]];then
A_HDD_DATA=( $(
gawk -v hddused="$hdd_used" '
- /[hs]d[a-z]$/ {
+ /[hsv]d[a-z]$/ {
driveSize = $(NF - 1)*1024/1000**3
gsub(/,/, " ", driveSize)
gsub(/^ +| +$/, "", driveSize)
# size += $3
# }
# special case from this data: 8 0 156290904 sda
- $1 ~ /^(3|22|33|8)$/ && $NF ~ /[hs]d[a-z]$/ && ( $2 % 16 == 0 || $2 % 16 == 8 ) {
+ $1 ~ /^(3|22|33|8)$/ && $NF ~ /[hsv]d[a-z]$/ && ( $2 % 16 == 0 || $2 % 16 == 8 ) {
size += $3
}
log_function_data 'cat' "$FILE_PARTITIONS"
fi
IFS="$ORIGINAL_IFS"
- log_function_data "A_HDD_DATA: ${A_HDD_DATA[@]}"
+ temp_array=${A_HDD_DATA[@]}
+ log_function_data "A_HDD_DATA: $temp_array"
eval $LOGFE
}
{
eval $LOGFS
local a_temp_working='' a_temp_scsi='' temp_holder='' temp_name='' i='' j=''
- local sd_ls_by_id='' ls_disk_by_id='' usb_exists=''
+ local sd_ls_by_id='' ls_disk_by_id='' usb_exists='' temp_array=''
## check for all ide type drives, non libata, only do it if hdx is in array
## this is now being updated for new /sys type paths, this may handle that ok too
- if [[ -n $( egrep 'hd[a-z]' <<< ${A_HDD_DATA[@]} ) ]];then
+ if [[ -n $( grep -E 'hd[a-z]' <<< ${A_HDD_DATA[@]} ) ]];then
# remember, we're using the last array item to store the total size of disks
for (( i=0; i < ${#A_HDD_DATA[@]} - 1; i++ ))
do
IFS=","
a_temp_working=( ${A_HDD_DATA[i]} )
IFS="$ORIGINAL_IFS"
- if [[ -n $( egrep '^hd[a-z]' <<< ${a_temp_working[0]} ) ]];then
+ if [[ -n $( grep -E '^hd[a-z]' <<< ${a_temp_working[0]} ) ]];then
if [[ -e /proc/ide/${a_temp_working[0]}/model ]];then
a_temp_working[2]="$( remove_erroneous_chars /proc/ide/${a_temp_working[0]}/model )"
else
IFS="$ORIGINAL_IFS"
## then we'll loop through that array looking for matches.
- if [[ -n $( egrep 'sd[a-z]' <<< ${A_HDD_DATA[@]} ) ]];then
+ if [[ -n $( grep -E 'sd[a-z]' <<< ${A_HDD_DATA[@]} ) ]];then
# first pack the main ls variable so we don't have to keep using ls /dev...
ls_disk_by_id="$( ls -l /dev/disk/by-id )"
for (( i=0; i < ${#A_HDD_DATA[@]} - 1; i++ ))
do
- if [[ -n $( egrep '^sd[a-z]' <<< ${A_HDD_DATA[$i]} ) ]];then
+ if [[ -n $( grep -E '^sd[a-z]' <<< ${A_HDD_DATA[$i]} ) ]];then
IFS=","
a_temp_working=( ${A_HDD_DATA[$i]} )
IFS="$ORIGINAL_IFS"
# discovered disk name AND ends with the correct identifier, sdx
# get rid of whitespace for some drive names and ids, and extra data after - in name
temp_name=$( tr ' ' '_' <<< ${a_temp_scsi[$j]} | cut -d '-' -f 1 )
- sd_ls_by_id=$( egrep -m1 ".*$temp_name.*${a_temp_working[0]}$" <<< "$ls_disk_by_id" )
+ sd_ls_by_id=$( grep -Em1 ".*$temp_name.*${a_temp_working[0]}$" <<< "$ls_disk_by_id" )
if [[ -n $sd_ls_by_id ]];then
temp_name=${a_temp_scsi[$j]}
if [[ -z $temp_name ]];then
temp_name="Name n/a"
else
- usb_exists=$( egrep -m1 "usb-.*$temp_name.*${a_temp_working[0]}$" <<< "$ls_disk_by_id" )
+ usb_exists=$( grep -Em1 "usb-.*$temp_name.*${a_temp_working[0]}$" <<< "$ls_disk_by_id" )
if [[ -n $usb_exists ]];then
a_temp_working[3]='USB'
fi
done
unset ls_disk_by_id # and then let's dump the data we don't need
fi
- log_function_data "A_HDD_DATA: ${A_HDD_DATA[@]}"
+ temp_array=${A_HDD_DATA[@]}
+ log_function_data "A_HDD_DATA: $temp_array"
eval $LOGFE
}
fi
# this will fail if regular user and no sudo present, but that's fine, it will just return null
hdd_temp=$( eval $sudo_command $HDDTEMP_PATH -nq -u C $1 )
- if [[ -n $hdd_temp && -n $( grep -E '^([0-9]+)$' <<< $hdd_temp ) ]];then
+ if [[ -n $hdd_temp && -n $( grep -E '^([0-9\.]+)$' <<< $hdd_temp ) ]];then
echo $hdd_temp
fi
fi
eval $LOGFS
local lspci_data="$( lspci -v | gawk '{
gsub(/\(prog-if[^)]*\)/,"")
+ sub(/^0000:/, "", $0) # seen case where the 0000: is prepended, rare, but happens
print
}' )"
eval $LOGFE
}
+get_machine_data()
+{
+ eval $LOGFS
+ local temp_array='' separator='' id_file='' file_data='' array_string=''
+ local id_dir='/sys/class/dmi/id/' dmi_name='' dmi_data=''
+ local machine_files="
+ sys_vendor product_name product_version product_serial product_uuid
+ board_vendor board_name board_version board_serial
+ bios_vendor bios_version bios_date
+ "
+ local dmi_names="
+ system-manufacturer system-product-name system-version system-serial-number system-uuid
+ baseboard-manufacturer baseboard-product-name baseboard-version baseboard-serial-number
+ bios-vendor bios-version bios-release-date
+ "
+ if [[ $B_EXTRA_EXTRA_DATA == 'true' ]];then
+ machine_files="$machine_files
+ chassis_vendor chassis_type chassis_version chassis_serial
+ "
+ dmi_names="$dmi_names
+ chassis-manufacturer chassis-type chassis-version chassis-serial-number
+ "
+ fi
+ if [[ -d $id_dir ]];then
+ for id_file in $machine_files
+ do
+ file_data=''
+ if [[ -r $id_dir$id_file ]];then
+ file_data=$( gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ {
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $0)
+ gsub(/,/, " ", $0)
+ # yes, there is a typo in a user data set, unknow
+ # Base Board Version|Base Board Serial Number
+ # Chassis Manufacturer|Chassis Version|Chassis Serial Number
+ # System manufacturer|System Product Name|System Version
+ # To Be Filled By O.E.M.
+ sub(/^Base Board .*|^Chassis .*|.*O\.E\.M\..*|.*OEM.*|^Not .*|^System .*|.*unknow.*|.*N\/A.*|none|^To be filled.*/, "", $0)
+ gsub(/bios|acpi/, "", $0)
+ sub(/http:\/\/www.abit.com.tw\//, "Abit", $0)
+ gsub(/^ +| +$/, "", $0)
+ gsub(/ [ \t]+/, " ", $0)
+ print $0
+ }' < $id_dir$id_file
+ )
+ fi
+ array_string="$array_string$separator$file_data"
+ separator=','
+ done
+ else
+ if [[ -n $( type -p dmidecode 2>/dev/null ) && -n $( dmidecode 2>/dev/null ) ]];then
+ if [[ $B_ROOT == 'true' ]];then
+ # this handles very old systems, like Lenny 2.6.26, with dmidecode, but no data
+ if [[ -z $( dmidecode 2>/dev/null | grep -i 'no smbios or dmi' ) ]];then
+ array_string='dmidecode-no-smbios-dmi-data'
+ else
+ for dmi_name in $dmi_names
+ do
+ # echo "$dmi_name" >&2
+ dmi_data=''
+ dmi_data=$( dmidecode -s $dmi_name | gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ {
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $0)
+ gsub(/,/, " ", $0)
+ # yes, there is a typo in a user data set, unknow
+ # Base Board Version|Base Board Serial Number
+ # Chassis Manufacturer|Chassis Version|Chassis Serial Number
+ # System manufacturer|System Product Name|System Version
+ # To Be Filled By O.E.M.
+ sub(/^Base Board .*|^Chassis .*|.*O\.E\.M\..*|.*OEM.*|^Not .*|^System .*|.*unknow.*|.*N\/A.*|none|^To be filled.*/, "", $0)
+ gsub(/bios|acpi/, "", $0)
+ sub(/http:\/\/www.abit.com.tw\//, "Abit", $0)
+ gsub(/^ +| +$/, "", $0)
+ gsub(/ [ \t]+/, " ", $0)
+ print $0
+ }' )
+ array_string="$array_string$separator$dmi_data"
+ separator=','
+ done
+ fi
+ else
+ array_string='dmidecode-non-root-user'
+ fi
+ fi
+ fi
+ IFS=','
+ A_MACHINE_DATA=( $array_string )
+ IFS="$ORIGINAL_IFS"
+ temp_array=${A_MACHINE_DATA[@]}
+ log_function_data "A_MACHINE_DATA: $temp_array"
+ eval $LOGFE
+}
+
## return memory used/installed
get_memory_data()
{
{
eval $LOGFS
+ local B_USB_NETWORKING='false' temp_array=''
+
IFS=$'\n'
- A_NETWORK_DATA=( $( echo "$Lspci_Data" | gawk '
+ A_NETWORK_DATA=( $(
+ echo "$Lspci_Data" | gawk '
BEGIN {
IGNORECASE=1
counter=0 # required to handle cases of > 1 instance of the same chipset
}
- /^[0-9a-f:.]+ (ethernet|network) (controller|bridge)/ || /^[0-9a-f:.]+ [^:]+: .*(ethernet|network).*$/ {
+ /^[0-9a-f:\.]+ (ethernet|network) (controller|bridge)/ || /^[0-9a-f:\.]+ [^:]+: .*(ethernet|network).*$/ {
nic=gensub(/^[0-9a-f:\.]+ [^:]+: (.+)$/,"\\1","g",$0)
gsub(/realtek semiconductor/, "Realtek", nic)
gsub(/davicom semiconductor/, "Davicom", nic)
print a[j] "," useDrivers "," usePorts "," useModules, "," usePciBusId
j++
}
- }') )
+ }'
+ ) )
IFS="$ORIGINAL_IFS"
- log_function_data "A_NETWORK_DATA: ${A_NETWORK_DATA[@]}"
+ get_networking_usb_data
+ if [[ $B_SHOW_ADVANCED_NETWORK == 'true' || $B_USB_NETWORKING == 'true' ]];then
+ get_network_advanced_data
+ fi
+ temp_array=${A_NETWORK_DATA[@]}
+ log_function_data "A_NETWORK_DATA: $temp_array"
+
+ eval $LOGFE
+}
+
+get_network_advanced_data()
+{
+ eval $LOGFS
+ local a_network_adv_working='' if_path='' working_path='' working_uevent_path='' dir_path=''
+ local if_id='' speed='' duplex='' mac_id='' oper_state=''
+ local usb_data='' usb_vendor='' usb_product='' product_path='' driver_test=''
+
+ for (( i=0; i < ${#A_NETWORK_DATA[@]}; i++ ))
+ do
+ IFS=","
+ a_network_adv_working=( ${A_NETWORK_DATA[i]} )
+ # reset these every go round
+ driver_test=''
+ if_id=''
+ speed=''
+ duplex=''
+ mac_id=''
+ oper_state=''
+ usb_data=''
+ if [[ -z $( grep '^usb-' <<< ${a_network_adv_working[4]} ) ]];then
+ # note although this may exist technically don't use it, it's a virtual path
+ # and causes weird cat errors when there's a missing file as well as a virtual path
+ # /sys/bus/pci/devices/0000:02:02.0/net/eth1
+ # real paths are: /sys/devices/pci0000:00/0000:00:1e/0/0000:02:02.0/net/eth1/uevent
+ # and on older debian kernels: /sys/devices/pci0000:00/0000:02:02.0/net:eth1/uevent
+ # but broadcom shows this sometimes:
+ # /sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/uevent:['DRIVER=b43', 'MODALIAS=ssb:v4243id0812rev0D']:
+ working_path="/sys/bus/pci/devices/0000:${a_network_adv_working[4]}"
+ # now we want the real one, that xiin also displays, without symbolic links.
+ if [[ -e $working_path ]];then
+ working_path=$( readlink -f $working_path 2>/dev/null )
+ # sometimes there is another directory between the path and /net
+ if [[ ! -e $working_path/net ]];then
+ # using find here, probably will need to also use it in usb part since the grep
+ # method seems to not be working now. Slice off the rest, which leaves the basic path
+ working_path=$( find $working_path/*/net/*/uevent 2>/dev/null | \
+ sed 's|/net.*||' )
+ fi
+ fi
+ # working_path=$( ls /sys/devices/pci*/*/0000:${a_network_adv_working[4]}/net/*/uevent )
+ else
+ # slice off the usb- part
+ usb_data=$( cut -d '-' -f 2-4 <<< ${a_network_adv_working[4]} )
+ usb_vendor=$( cut -d ':' -f 1 <<< $usb_data )
+ usb_product=$( cut -d ':' -f 2 <<< $usb_data )
+ # this grep returns the path plus the contents of the file, with a colon separator, so slice that off
+ # /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/idVendor
+ working_path=$( grep -s "$usb_vendor" /sys/devices/pci*/*/usb*/*/*/idVendor | \
+ sed -e "s/idVendor:$usb_vendor//" -e '/driver/d' )
+ # try an alternate path if first one doesn't work
+ # /sys/devices/pci0000:00/0000:00:0b.1/usb1/1-1/idVendor
+ if [[ -z $working_path ]];then
+ working_path=$( grep -s "$usb_vendor" /sys/devices/pci*/*/usb*/*/idVendor | \
+ sed -e "s/idVendor:$usb_vendor//" -e '/driver/d' )
+ product_path=$( grep -s "$usb_product" /sys/devices/pci*/*/usb*/*/idProduct | \
+ sed -e "s/idProduct:$usb_product//" -e '/driver/d' )
+ else
+ product_path=$( grep -s "$usb_product" /sys/devices/pci*/*/usb*/*/*/idProduct | \
+ sed -e "s/idProduct:$usb_product//" -e '/driver/d' )
+ fi
+
+ # make sure it's the right product/vendor match here, it will almost always be but let's be sure
+ if [[ -n $working_path && -n $product_path ]] && [[ $working_path == $product_path ]];then
+ #if [[ -n $working_path ]];then
+ # now ls that directory and get the numeric starting sub directory and that should be the full path
+ # to the /net directory part
+ dir_path=$( ls ${working_path} 2>/dev/null | grep -sE '^[0-9]' )
+ working_uevent_path="${working_path}${dir_path}"
+ fi
+ fi
+ # /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/uevent grep for DRIVER=
+ # /sys/devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1:1.0/uevent
+ if [[ -n $usb_data ]];then
+ driver_test=$( grep -si 'DRIVER=' $working_uevent_path/uevent | cut -d '=' -f 2 )
+ if [[ -n $driver_test ]];then
+ a_network_adv_working[1]=$driver_test
+ fi
+ fi
+ log_function_data "PRE: working_path: $working_path\nworking_uevent_path: $working_uevent_path"
+
+ # this applies in two different cases, one, default, standard, two, for usb, this is actually
+ # the short path, minus the last longer numeric directory name, ie:
+ # from debian squeeze 2.6.32-5-686:
+ # /sys/devices/pci0000:00/0000:00:0b.1/usb1/1-1/net/wlan0/address
+ if [[ -e $working_path/net ]];then
+ if_path=$( ls $working_path/net 2>/dev/null )
+ if_id=$if_path
+ working_path=$working_path/net/$if_path
+ # this is the normal usb detection if the first one didn't work
+ elif [[ -n $usb_data && -e $working_uevent_path/net ]];then
+ if_path=$( ls $working_uevent_path/net 2>/dev/null )
+ if_id=$if_path
+ working_path=$working_uevent_path/net/$if_path
+ # 2.6.32 debian lenny kernel shows not: /net/eth0 but /net:eth0
+ else
+ if_path=$( ls $working_path 2>/dev/null | grep 'net:' )
+ if_id=$( cut -d ':' -f 2 <<< "$if_path" )
+ working_path=$working_path/$if_path
+ fi
+ log_function_data "POST: working_path: $working_path\nif_path: $if_path - if_id: $if_id"
+
+ if [[ -n $if_path ]];then
+ if [[ -r $working_path/speed ]];then
+ speed=$( cat $working_path/speed 2>/dev/null )
+ fi
+ if [[ -r $working_path/duplex ]];then
+ duplex=$( cat $working_path/duplex 2>/dev/null )
+ fi
+ if [[ -r $working_path/address ]];then
+ mac_id=$( cat $working_path/address 2>/dev/null )
+ fi
+ if [[ -r $working_path/operstate ]];then
+ oper_state=$( cat $working_path/operstate 2>/dev/null )
+ fi
+ fi
+
+ A_NETWORK_DATA[i]=${a_network_adv_working[0]}","${a_network_adv_working[1]}","${a_network_adv_working[2]}","${a_network_adv_working[3]}","${a_network_adv_working[4]}","$if_id","$oper_state","$speed","$duplex","$mac_id
+ IFS="$ORIGINAL_IFS"
+ done
+
+ eval $LOGFE
+}
+
+get_networking_usb_data()
+{
+ eval $LOGFS
+ local lsusb_path='' lsusb_data='' a_usb='' array_count=''
+
+ # now we'll check for usb wifi, a work in progress
+ # USB_NETWORK_SEARCH
+ # alsa usb detection by damentz
+ # for every sound card symlink in /proc/asound - display information about it
+ lsusb_path=$( type -p lsusb )
+ # if lsusb exists, the file is a symlink, and contains an important usb exclusive file: continue
+ if [[ -n $lsusb_path ]]; then
+ # send error messages of lsusb to /dev/null as it will display a bunch if not a super user
+ lsusb_data="$( $lsusb_path 2>/dev/null )"
+ # also, find the contents of usbid in lsusb and print everything after the 7th word on the
+ # corresponding line. Finally, strip out commas as they will change the driver :)
+ if [[ -n $lsusb_data ]];then
+ IFS=$'\n'
+ a_usb=( $(
+ gawk '
+ BEGIN {
+ IGNORECASE=1
+ string=""
+ separator=""
+ }
+ /'"$USB_NETWORK_SEARCH"'/ && !/bluetooth| hub|keyboard|mouse|printer| ps2|reader|scan|storage/ {
+ string=""
+ gsub( /,/, " ", $0 )
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $0)
+ gsub(/ [ \t]+/, " ", $0)
+ sub(/realtek semiconductor/, "Realtek", $0)
+ sub(/davicom semiconductor/, "Davicom", $0)
+ sub(/Belkin Components/, "Belkin", $0)
+ for ( i=7; i<= NF; i++ ) {
+ string = string separator $i
+ separator = " "
+ }
+ if ( $6 != "" ){
+ print string ",,,,usb-" $6
+ }
+ }' <<< "$lsusb_data"
+ ) )
+ IFS="$ORIGINAL_IFS"
+ if [[ ${#a_usb[@]} -gt 0 ]];then
+ array_count=${#A_NETWORK_DATA[@]}
+ for (( i=0; i < ${#a_usb[@]}; i++ ))
+ do
+ A_NETWORK_DATA[$array_count]=${a_usb[i]}
+ ((array_count++))
+ done
+ # need this to get the driver data for -N regular output, but no need
+ # to run the advanced stuff unless required
+ B_USB_NETWORKING='true'
+ fi
+ fi
+ fi
+# echo $B_USB_NETWORKING
eval $LOGFE
}
{
eval $LOGFS
- local ifconfig_path=$( type -p ifconfig )
-
- # lack of ifconfig will throw an error only upon it's usage
- if [[ -n $ifconfig_path ]];then
- IFS=$'\n'
- A_INTERFACES_DATA=( $( $ifconfig_path | gawk '
+ local ip_tool_command=$( type -p ip )
+ local temp_array='' ip_tool='ip' ip_tool_data=''
+ # the chances for all new systems to have ip by default are far higher than
+ # the deprecated ifconfig. Only try for ifconfig if ip is not present in system
+ if [[ -z $ip_tool_command ]];then
+ ip_tool_command=$( type -p ifconfig )
+ ip_tool='ifconfig'
+ else
+ ip_tool_command="$ip_tool_command addr"
+ fi
+ if [[ -n "$ip_tool_command" ]];then
+ if [[ $ip_tool == 'ifconfig' ]];then
+ ip_tool_data="$( $ip_tool_command )"
+ # note, ip addr does not have proper record separation, so creating new lines explicitly here at start
+ # of each IF record item. Also getting rid of the unneeded numeric line starters, now it can be parsed
+ # like ifconfig more or less
+ elif [[ $ip_tool == 'ip' ]];then
+ ip_tool_data="$( eval ${ip_tool_command} | sed 's/^[0-9]\+:[[:space:]]\+/\n/' )"
+ fi
+ fi
+ if [[ -z $ip_tool_command ]];then
+ A_INTERFACES_DATA=( "Interfaces program 'ip' missing. Please check: $SCRIPT_NAME --recommends" )
+ elif [[ -n "$ip_tool_data" ]];then
+ IFS=$'\n' # $ip_tool_command
+ A_INTERFACES_DATA=( $(
+ gawk -v ipTool=$ip_tool '
BEGIN {
IGNORECASE=1
+ interface=""
+ ifIp=""
+ ifIpV6=""
+ ifMask=""
+ }
+ # skip past the lo item
+ /^lo/ {
+ while (getline && !/^$/ ) {
+ # do nothing, just get past this entry item
+ }
}
- $0 !~ /^lo/ {
+ /^[a-zA-Z]+[0-9]/ {
# not clear on why inet is coming through, but this gets rid of it
# as first line item.
+ gsub(/,/, " ", $0)
+ gsub(/^ +| +$/, "", $0)
+ gsub(/ [ \t]+/, " ", $0)
interface = $1
- gsub(/,/, " ", interface)
- gsub(/^ +| +$/, "", interface)
- gsub(/ [ \t]+/, " ", interface)
-
+ # prep this this for ip addr: eth0:
+ sub(/:/, "", interface)
+ ifIp=""
+ ifIpV6=""
+ ifMask=""
aInterfaces[interface]++
- while (getline && !/^$/) {
- if (/inet addr:/) {
- ipAddresses[interface] = gensub( /addr:([0-9\.]+)/, "\\1", "g", $2 )
+
+ while (getline && !/^$/ ) {
+ if ( ipTool == "ifconfig" ) {
+ if (/inet addr:/) {
+ ifIp = gensub( /addr:([0-9\.]+)/, "\\1", "g", $2 )
+ if (/mask:/) {
+ ifMask = gensub( /mask:([0-9\.]+)/, "\\1", "g", $NF )
+ }
+ }
+ if (/inet6 addr:/) {
+ ifIpV6 = $3
+ }
+ }
+ else if ( ipTool == "ip" ) {
+ if ( $1 == "inet" ) {
+ ifIp = $2
+ }
+ if ( $1 == "inet6" ) {
+ ifIpV6 = $2
+ }
}
}
+ # slice off the digits that are sometimes tacked to the end of the address,
+ # like: /64 or /24
+ sub(/\/[0-9]+/, "", ifIp)
+ sub(/\/[0-9]+/, "", ifIpV6)
+ ipAddresses[interface] = ifIp "," ifMask "," ifIpV6
}
-
END {
j=0
for (i in aInterfaces) {
- useInterfaceIp = ""
+ ifData = ""
a[j] = i
if (ipAddresses[i] != "") {
- useInterfaceIp = ipAddresses[i]
+ ifData = ipAddresses[i]
}
# create array primary item for master array
# tested needed to avoid bad data from above, if null it is garbage
# this is the easiest way to handle junk I found, improve if you want
- if ( useInterfaceIp != "" ) {
- print a[j] "," useInterfaceIp
+ if ( ifData != "" ) {
+ print a[j] "," ifData
}
j++
}
- }') )
+ }' <<< "$ip_tool_data"
+ ) )
IFS="$ORIGINAL_IFS"
else
- A_INTERFACES_DATA=( "Interfaces tool requires missing app: ifconfig" )
+ A_INTERFACES_DATA=( "Interfaces program $ip_tool present but created no data. " )
+ fi
+ temp_array=${A_INTERFACES_DATA[@]}
+ log_function_data "A_INTERFACES_DATA: $temp_array"
+ eval $LOGFE
+}
+# get_networking_local_ip_data;exit
+
+# get_networking_local_ip_data;exit
+get_optical_drive_data()
+{
+ eval $LOGFS
+
+ local temp_array='' sys_uevent_path='' proc_cdrom='' link_list=''
+ local separator='' linked='' disk='' item_string='' proc_info_string=''
+ local dev_disks_links="$( ls /dev/dvd* /dev/cd* /dev/scd* 2>/dev/null )"
+ # get the actual disk dev location, first try default which is easier to run, need to preserve line breaks
+ local dev_disks_real="$( echo "$dev_disks_links" | xargs -l readlink 2>/dev/null | sort -u )"
+ # Some systems don't support xargs -l so we need to do it manually
+ if [[ -z $dev_disks_real ]];then
+ for linked in $dev_disks_links
+ do
+ disk=$( readlink $linked 2>/dev/null )
+ if [[ -n $disk ]];then
+ disk=$( basename $disk ) # puppy shows this as /dev/sr0, not sr0
+ if [[ -z $dev_disks_real || -z $( grep $disk <<< $dev_disks_real ) ]];then
+ # need line break IFS for below, no white space
+ dev_disks_real="$dev_disks_real$separator$disk"
+ separator=$'\n'
+ fi
+ fi
+ done
+ dev_disks_real="$( sort -u <<< "$dev_disks_real" )"
+ linked=''
+ disk=''
+ separator=''
+ fi
+
+ # A_OPTICAL_DRIVE_DATA indexes: not going to use all these, but it's just as easy to build the full
+ # data array and use what we need from it as to update it later to add features or items
+ # 0 - true dev path, ie, sr0, hdc
+ # 1 - dev links to true path
+ # 2 - device vendor - for hdx drives, vendor model are one string from proc
+ # 3 - device model
+ # 4 - device rev version
+ # 5 - speed
+ # 6 - multisession support
+ # 7 - MCN support
+ # 8 - audio read
+ # 9 - cdr
+ # 10 - cdrw
+ # 11 - dvd read
+ # 12 - dvdr
+ # 13 - dvdram
+ # 14 - state
+
+ if [[ -n $dev_disks_real ]];then
+ if [[ $B_SHOW_FULL_OPTICAL == 'true' ]];then
+ proc_cdrom="$( cat /proc/sys/dev/cdrom/info 2>/dev/null )"
+ fi
+ IFS=$'\n'
+ A_OPTICAL_DRIVE_DATA=( $(
+ for disk in $dev_disks_real
+ do
+ for linked in $dev_disks_links
+ do
+ if [[ -n $( readlink $linked | grep $disk ) ]];then
+ linked=$( basename $linked )
+ link_list="$link_list$separator$linked"
+ separator='~'
+ fi
+ done
+ item_string="$disk,$link_list"
+ link_list=''
+ linked=''
+ separator=''
+ vendor=''
+ model=''
+ proc_info_string=''
+ rev_number=''
+ state=""
+ sys_path=''
+ # this is only for new sd type paths in /sys, otherwise we'll use /proc/ide
+ if [[ -z $( grep '^hd' <<< $disk ) ]];then
+ sys_path=$( ls /sys/devices/pci*/*/host*/target*/*/block/$disk/uevent 2>/dev/null | sed "s|/block/$disk/uevent||" )
+ # no need to test for errors yet, probably other user systems will require some alternate paths though
+ if [[ -n $sys_path ]];then
+ vendor=$( cat $sys_path/vendor 2>/dev/null )
+ model=$( cat $sys_path/model 2>/dev/null | sed 's/^[[:space:]]*//;s/[[:space:]]*$//;s/,//g' )
+ state=$( cat $sys_path/state 2>/dev/null | sed 's/^[[:space:]]*//;s/[[:space:]]*$//;s/,//g' )
+ rev_number=$( cat $sys_path/rev 2>/dev/null | sed 's/^[[:space:]]*//;s/[[:space:]]*$//;s/,//g' )
+ fi
+ elif [[ -e /proc/ide/$disk/model ]];then
+ vendor=$( cat /proc/ide/$disk/model 2>/dev/null )
+ fi
+ if [[ -n $vendor ]];then
+ vendor=$( gawk '
+ BEGIN {
+ IGNORECASE=1
+ }
+ {
+ gsub(/'"$BAN_LIST_NORMAL"'/, "", $0)
+ sub(/TSSTcorp/, "TSST ", $0) # seen more than one of these weird ones
+ gsub(/,/, " ", $0)
+ gsub(/^[[:space:]]*|[[:space:]]*$/, "", $0)
+ gsub(/ [[:space:]]+/, " ", $0)
+ print $0
+ }' <<< $vendor
+ )
+ fi
+ # this needs to run no matter if there's proc data or not to create the array comma list
+ if [[ $B_SHOW_FULL_OPTICAL == 'true' ]];then
+ proc_info_string=$( gawk -v diskId=$disk '
+ BEGIN {
+ IGNORECASE=1
+ position=""
+ speed=""
+ multisession=""
+ mcn=""
+ audio=""
+ cdr=""
+ cdrw=""
+ dvd=""
+ dvdr=""
+ dvdram=""
+ }
+ # first get the position of the device name from top field
+ # we will use this to get all the other data for that column
+ /drive name:/ {
+ for ( position=3; position <= NF; position++ ) {
+ if ( $position == diskId ) {
+ break
+ }
+ }
+ }
+ /drive speed:/ {
+ speed = $position
+ }
+ /Can read multisession:/ {
+ multisession=$( position + 1 )
+ }
+ /Can read MCN:/ {
+ mcn=$( position + 1 )
+ }
+ /Can play audio:/ {
+ audio=$( position + 1 )
+ }
+ /Can write CD-R:/ {
+ cdr=$( position + 1 )
+ }
+ /Can write CD-RW:/ {
+ cdrw=$( position + 1 )
+ }
+ /Can read DVD:/ {
+ dvd=$( position + 1 )
+ }
+ /Can write DVD-R:/ {
+ dvdr=$( position + 1 )
+ }
+ /Can write DVD-RAM:/ {
+ dvdram=$( position + 1 )
+ }
+ END {
+ print speed "," multisession "," mcn "," audio "," cdr "," cdrw "," dvd "," dvdr "," dvdram
+ }
+ ' <<< "$proc_cdrom"
+ )
+ fi
+ item_string="$item_string,$vendor,$model,$rev_number,$proc_info_string,$state"
+ echo $item_string
+ done
+ ) )
+ IFS="$ORIGINAL_IFS"
fi
- log_function_data "A_INTERFACES_DATA: ${A_INTERFACES_DATA[@]}"
+ temp_array=${A_OPTICAL_DRIVE_DATA[@]}
+ log_function_data "A_OPTICAL_DRIVE_DATA: $temp_array"
eval $LOGFE
}
{
eval $LOGFS
- local a_partition_working='' dev_item=''
+ local a_partition_working='' dev_item='' temp_array=''
#local excluded_file_types='--exclude-type=aufs --exclude-type=tmpfs --exclude-type=iso9660'
# df doesn't seem to work in script with variables like at the command line
- local main_partition_data="$( df -h -T --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 )"
+ # added devfs linprocfs sysfs fdescfs which show on debian kfreebsd kernel output
+ local main_partition_data="$( df -h -T -P --exclude-type=aufs --exclude-type=squashfs --exclude-type=unionfs --exclude-type=devtmpfs --exclude-type=tmpfs --exclude-type=iso9660 --exclude-type=devfs --exclude-type=linprocfs --exclude-type=sysfs --exclude-type=fdescfs )"
local swap_data="$( swapon -s )"
# set dev disk label/uuid data globals
get_partition_uuid_label_data 'label'
log_function_data 'raw' "main_partition_data:\n$main_partition_data\n\nswap_data:\n$swap_data"
+ # new kernels/df have rootfs and / repeated, creating two entries for the same partition
+ # so check for two string endings of / then slice out the rootfs one, I could check for it
+ # before slicing it out, but doing that would require the same action twice re code execution
+ if [[ $( grep -cs '[[:space:]]/$' <<< "$main_partition_data" ) -gt 1 ]];then
+ main_partition_data="$( grep -vs '^rootfs' <<< "$main_partition_data" )"
+ fi
+ log_function_data 'raw' "main_partition_data_post_rootfs:\n$main_partition_data\n\nswap_data:\n$swap_data"
IFS=$'\n'
# sample line: /dev/sda2 ext3 15G 8.9G 4.9G 65% /home
# $NF = partition name; $(NF - 4) = partition size; $(NF - 3) = used, in gB; $(NF - 1) = percent used
# this is required because below we are subtracting from NF, so it has to be > 5
# the real issue is long file system names that force the wrap of df output: //fileserver/main
# but we still need to handle more dynamically long space containing file names, but later.
- ( NF < 6 ) && ( $0 !~ /[0-9]+\%/ ) {
+ # Using df -P should fix this, ie, no wrapping of line lines, but leaving this for now
+ ( NF < 6 ) && ( $0 !~ /[0-9]+%/ ) {
# set the dev location here for cases of wrapped output
if ( NF == 1 ){
devBase=gensub( /^(\/dev\/)(.+)$/, "\\2", 1, $1 )
# this is to avoid file systems with spaces in their names, that will make
# the test show the wrong data in each of the fields, if no x%, then do not use
# using 3 cases, first default, standard, 2nd, 3rd, handles one and two spaces in name
- if ( $(NF - 1) ~ /[0-9]+\%/ ) {
+ if ( $(NF - 1) ~ /[0-9]+%/ ) {
print $NF "," $(NF - 4) "," $(NF - 3) "," $(NF - 1) ",secondary," $(NF - 5) "," devBase
}
# these two cases construct the space containing name
- else if ( $(NF - 2) ~ /[0-9]+\%/ ) {
+ else if ( $(NF - 2) ~ /[0-9]+%/ ) {
print $(NF - 1) " " $NF "," $(NF - 5) "," $(NF - 4) "," $(NF - 2) ",secondary," $(NF - 6) "," devBase
}
- else if ( $(NF - 3) ~ /[0-9]+\%/ ) {
+ else if ( $(NF - 3) ~ /[0-9]+%/ ) {
print $(NF - 2) " " $(NF - 1) " " $NF "," $(NF - 6) "," $(NF - 5) "," $(NF - 3) ",secondary," $(NF - 7) "," devBase
}
}
devBase = gensub( /^(\/dev\/)(.+)$/, "\\2", 1, $1 )
used = sprintf( "%.2f", $4*1024/1000**3 )
percentUsed = sprintf( "%.0f", ( $4/$3 )*100 )
- print "swap-" swapCounter "," size "GB," used "GB," percentUsed "\%,main," "swap," devBase
+ print "swap-" swapCounter "," size "GB," used "GB," percentUsed "%,main," "swap," devBase
swapCounter = ++swapCounter
}' ) )
IFS="$ORIGINAL_IFS"
+ temp_array=${A_PARTITION_DATA[@]}
+ log_function_data "1: A_PARTITION_DATA:\n$temp_array"
+
# now we'll handle some fringe cases where irregular df -hT output shows /dev/disk/.. instead of
# /dev/h|sdxy type data for column 1, . A_PARTITION_DATA[6]
+ # Here we just search for the uuid/label and then grab the end of the line to get the right dev item.
for (( i=0; i < ${#A_PARTITION_DATA[@]}; i++ ))
do
IFS=","
fi
fi
done
-
+ temp_array=${A_PARTITION_DATA[@]}
+ log_function_data "2: A_PARTITION_DATA:\n$temp_array"
if [[ $B_SHOW_LABELS == 'true' || $B_SHOW_UUIDS == 'true' ]];then
get_partition_data_advanced
fi
- log_function_data "A_PARTITION_DATA: ${A_PARTITION_DATA[@]}"
eval $LOGFE
}
{
eval $LOGFS
local a_partition_working='' dev_partition_data=''
- local dev_item='' dev_label='' dev_uuid=''
+ local dev_item='' dev_label='' dev_uuid='' temp_array=''
local mount_point=''
# set dev disk label/uuid data globals
get_partition_uuid_label_data 'label'
# if this works, great, otherwise, just set this to null values
partTemp="'$( readlink /dev/root 2>/dev/null )'"
if ( partTemp != "" ) {
- if ( partTemp ~ /[hs]d[a-z][0-9]/ ) {
+ if ( partTemp ~ /[hsv]d[a-z][0-9]{1,2}/ ) {
partition=gensub( /^(\/dev\/)(.+)$/, "\\2", 1, partTemp )
}
else if ( partTemp ~ /by-uuid/ ) {
# it's more likely we'll get a uuid than a label. But this should get the
# dev item set no matter what, so then we can get the rest of any missing data
# first we'll get the dev_item if it's missing
- if [[ -n $DEV_DISK_UUID ]] && [[ -z $dev_item && -n $dev_uuid ]];then
- dev_item=$( echo "$DEV_DISK_UUID" | gawk '
- /'$dev_uuid'/ {
- item=gensub( /..\/..\/(.+)/, "\\1", 1, $NF )
- print item
+ if [[ -z $dev_item ]];then
+ if [[ -n $DEV_DISK_UUID && -n $dev_uuid ]];then
+ dev_item=$( echo "$DEV_DISK_UUID" | gawk '
+ /'$dev_uuid'/ {
+ item=gensub( /..\/..\/(.+)/, "\\1", 1, $NF )
+ print item
+ }' )
+ elif [[ -n $DEV_DISK_LABEL && -n $dev_label ]];then
+ dev_item=$( echo "$DEV_DISK_LABEL" | gawk '
+ # first we need to change space x20 in by-label back to a real space
+ #gsub( /x20/, " ", $0 )
+ # then we can see if the string is there
+ /'$dev_label'/ {
+ item=gensub( /..\/..\/(.+)/, "\\1", 1, $NF )
+ print item
+ }' )
+ fi
+ fi
+ # this can trigger all kinds of weird errors if it is a non /dev path, like: remote:/machine/name
+ if [[ -n $dev_item && -z $( grep -E '(^//|:/)' <<< $dev_item ) ]];then
+ if [[ -n $DEV_DISK_UUID && -z $dev_uuid ]];then
+ dev_uuid=$( echo "$DEV_DISK_UUID" | gawk '
+ /'$dev_item'$/ {
+ print $(NF - 2)
}' )
- elif [[ -n $DEV_DISK_LABEL ]] && [[ -z $dev_item && -n $dev_label ]];then
- dev_item=$( echo "$DEV_DISK_LABEL" | gawk '
- # first we need to change space x20 in by-label back to a real space
- #gsub( /x20/, " ", $0 )
- # then we can see if the string is there
- /'$dev_label'/ {
- item=gensub( /..\/..\/(.+)/, "\\1", 1, $NF )
- print item
+ fi
+ if [[ -n $DEV_DISK_LABEL && -z $dev_label ]];then
+ dev_label=$( echo "$DEV_DISK_LABEL" | gawk '
+ /'$dev_item'$/ {
+ print $(NF - 2)
}' )
- fi
- if [[ -n $DEV_DISK_UUID ]] && [[ -n $dev_item && -z $dev_uuid ]];then
- dev_uuid=$( echo "$DEV_DISK_UUID" | gawk '
- /'$dev_item'$/ {
- print $(NF - 2)
- }' )
- fi
- if [[ -n $DEV_DISK_LABEL ]] && [[ -n $dev_item && -z $dev_label ]];then
- dev_label=$( echo "$DEV_DISK_LABEL" | gawk '
- /'$dev_item'/ {
- print $(NF - 2)
- }' )
+ fi
fi
# assemble everything we could get for dev/h/dx, label, and uuid
done
log_function_data 'cat' "$FILE_MOUNTS"
fi
- log_function_data "A_PARTITION_DATA: ${A_PARTITION_DATA[@]}"
+ temp_array=${A_PARTITION_DATA[@]}
+ log_function_data "3-advanced: A_PARTITION_DATA:\n$temp_array"
eval $LOGFE
}
-
# args: $1 - uuid/label
get_partition_uuid_label_data()
{
eval $LOGFE
}
+get_patch_version_string()
+{
+ local script_patch_number=$( sed 's/^[0]\+//' <<< $SCRIPT_PATCH_NUMBER )
+ if [[ -n $script_patch_number ]];then
+ script_patch_number="-$script_patch_number"
+ fi
+ echo $script_patch_number
+}
+
# args: $1 - type cpu/mem
get_ps_data()
{
{
eval $LOGFS
- local sensors_path=$( type -p sensors )
+
+ local temp_array=''
IFS=$'\n'
- if [[ -n $sensors_path ]];then
+ if [[ -n $Sensors_Data ]];then
# note: non-configured sensors gives error message, which we need to redirect to stdout
# also, -F ':' no space, since some cases have the data starting right after,like - :1287
A_SENSORS_DATA=( $(
- $sensors_path | gawk -F ':' -v userCpuNo="$SENSORS_CPU_NO" '
+ gawk -F ':' -v userCpuNo="$SENSORS_CPU_NO" '
BEGIN {
IGNORECASE=1
core0Temp="" # only if all else fails...
tempWorking=""
tempWorkingUnit=""
}
+ # new data arriving: gpu temp in sensors, have to skip that
+ /^('"$SENSORS_GPU_SEARCH"')-pci/ {
+ while ( getline && !/^$/ ) {
+ # do nothing, just skip it
+ }
+ }
# dumping the extra + signs after testing for them, nobody has negative temps.
# also, note gawk treats ° as a space, so we have to get the C/F data
# there are some guesses here, but with more sensors samples it will get closer.
print fanMainString
print fanDefaultString
}
- }
- '
+ }' <<< "$Sensors_Data"
) )
# the error case needs to go here because we are setting special array delimiter ','
else
fi
IFS="$ORIGINAL_IFS"
- log_function_data "A_SENSORS_DATA: ${A_SENSORS_DATA[@]}"
+ temp_array=${A_SENSORS_DATA[@]}
+ log_function_data "A_SENSORS_DATA: $temp_array"
# echo "A_SENSORS_DATA: ${A_SENSORS_DATA[@]}"
eval $LOGFE
}
+get_sensors_output()
+{
+ local sensors_path=$( type -p sensors ) sensors_data=''
+
+ if [[ -n $sensors_path ]];then
+ sensors_data="$( $sensors_path 2>/dev/null )"
+ if [[ -n "$sensors_data" ]];then
+ # make sure the file ends in newlines then characters, the newlines are lost in the echo unless
+ # the data ends in some characters
+ sensors_data="$sensors_data\n\n###"
+ fi
+ fi
+ echo -e "$sensors_data"
+}
+
get_unmounted_partition_data()
{
eval $LOGFS
fi
done
- A_UNMOUNTED_PARTITION_DATA=( $( grep -Ev '('$mounted_partitions')' $FILE_PARTITIONS | gawk '
+ A_UNMOUNTED_PARTITION_DATA=( $( grep -Ev '('$mounted_partitions')$' $FILE_PARTITIONS | gawk '
BEGIN {
IGNORECASE=1
}
fi
# this will fail if regular user and no sudo present, but that's fine, it will just return null
# note the hack that simply slices out the first line if > 1 items found in string
+ # also, if grub/lilo is on partition boot sector, no file system data is available
partition_filesystem=$( eval $sudo_command $FILE_PATH -s $1 | grep -Eio '(ext2|ext3|ext4|ext5|ext[[:space:]]|ntfs|fat32|fat16|fat[[:space:]]\(.*\)|vfat|fatx|tfat|swap|btrfs|ffs[[:space:]]|hfs\+|hfs[[:space:]]plus|hfs[[:space:]]extended[[:space:]]version[[:space:]][1-9]|hfsj|hfs[[:space:]]|jfs[[:space:]]|nss[[:space:]]|reiserfs|reiser4|ufs2|ufs[[:space:]]|xfs[[:space:]]|zfs[[:space:]])' | grep -Em 1 '.*' )
if [[ -n $partition_filesystem ]];then
echo $partition_filesystem
#### special data handling for specific options and conditions
#### -------------------------------------------------------------------
+# args: $1 - string to strip color code characters out of
+# returns count of string length minus colors
+calculate_line_length()
+{
+ local string="$1"
+ # ansi: \e[1;34m irc: \x0312
+ string=$( sed -e "s/\x1b\[[0-9]\{1,2\}\(;[0-9]\{1,2\}\)\{0,2\}m//g" -e "s/\\\x0[0-9]\{1,3\}//g" <<< $string )
+ count=$( wc -c <<< $string )
+ echo $count
+}
+
## multiply the core count by the data to be calculated, bmips, cache
# args: $1 - string to handle; $2 - cpu count
calculate_multicore_data()
eval $LOGFS
local string_number=$1 string_data=''
- if [[ -n $( egrep -i '( mb| kb)' <<< $1 ) ]];then
+ if [[ -n $( grep -Ei '( mb| kb)' <<< $1 ) ]];then
string_data=" $( gawk '{print $2}' <<< $1 )" # add a space for output
string_number=$( gawk '{print $1}' <<< $1 )
fi
# handle weird error cases where it's not a number
- if [[ -n $( egrep '^[0-9\.,]+$' <<< $string_number ) ]];then
+ if [[ -n $( grep -E '^[0-9\.,]+$' <<< $string_number ) ]];then
string_number=$( echo $string_number $2 | gawk '{
total = $1*$2
print total
print_short_data
else
Lspci_Data="$( get_lspci_data )"
- if [[ $VERBOSITY_LEVEL -ge 1 || $B_SHOW_SYSTEM == 'true' ]];then
+ if [[ $B_SHOW_SYSTEM == 'true' ]];then
print_system_data
fi
- if [[ $VERBOSITY_LEVEL -ge 1 || $B_SHOW_CPU == 'true' ]];then
+ if [[ $B_SHOW_MACHINE == 'true' ]];then
+ print_machine_data
+ fi
+ if [[ $B_SHOW_BASIC_CPU == 'true' || $B_SHOW_CPU == 'true' ]];then
print_cpu_data
fi
- if [[ $VERBOSITY_LEVEL -ge 1 || $B_SHOW_GRAPHICS == 'true' ]];then
+ if [[ $B_SHOW_GRAPHICS == 'true' ]];then
print_gfx_data
fi
- if [[ $VERBOSITY_LEVEL -ge 5 || $B_SHOW_AUDIO == 'true' ]];then
+ if [[ $B_SHOW_AUDIO == 'true' ]];then
print_audio_data
fi
- if [[ $VERBOSITY_LEVEL -ge 2 || $B_SHOW_NETWORK == 'true' ]];then
+ if [[ $B_SHOW_NETWORK == 'true' ]];then
print_networking_data
fi
- if [[ $VERBOSITY_LEVEL -ge 1 || $B_SHOW_DISK == 'true' ]];then
+ if [[ $B_SHOW_DISK_TOTAL == 'true' || $B_SHOW_BASIC_DISK == 'true' || $B_SHOW_DISK == 'true' ]];then
print_hard_disk_data
fi
- if [[ $VERBOSITY_LEVEL -ge 4 || $B_SHOW_PARTITIONS == 'true' ]];then
+ if [[ $B_SHOW_PARTITIONS == 'true' ]];then
print_partition_data
fi
if [[ $B_SHOW_UNMOUNTED_PARTITIONS == 'true' ]];then
print_unmounted_partition_data
fi
- if [[ $VERBOSITY_LEVEL -ge 5 || $B_SHOW_SENSORS == 'true' ]];then
+ if [[ $B_SHOW_SENSORS == 'true' ]];then
print_sensors_data
fi
if [[ $B_SHOW_REPOS == 'true' ]];then
if [[ $B_SHOW_PS_CPU_DATA == 'true' || $B_SHOW_PS_MEM_DATA == 'true' ]];then
print_ps_data
fi
- if [[ $VERBOSITY_LEVEL -ge 1 || $B_SHOW_INFO == 'true' ]];then
+ if [[ $B_SHOW_INFO == 'true' ]];then
print_info_data
fi
fi
# this gets that weird min/max final array item
local min_max_clock_nu=$(( ${#A_CPU_DATA[@]} - 1 ))
local min_max_clock=${A_CPU_DATA[$min_max_clock_nu]}
+ local script_patch_number=$( get_patch_version_string )
#set_color_scheme 12
if [[ $B_RUNNING_IN_SHELL == 'false' ]];then
#C1="${C1},1"; C2="${C2},1"; CN="${CN},1"
fi
fi
- short_data="${C1}CPU$cpc_plural${CN}[${C2}${SEP1}${cpu_data_string} ${cpu_model}$model_plural (${cpu_type}) clocked at ${min_max_clock}${SEP1}${CN}] ${C1}Kernel${CN}[${C2}${SEP1}${current_kernel}${SEP1}${CN}] ${C1}Up${CN}[${C2}${SEP1}${up_time}${SEP1}${CN}] ${C1}Mem${CN}[${C2}${SEP1}${memory}${SEP1}${CN}] ${C1}HDD${CN}[${C2}${SEP1}${hdd_capacity}($hdd_used)${SEP1}${CN}] ${C1}Procs${CN}[${C2}${SEP1}${processes}${SEP1}${CN}]"
+ short_data="${C1}CPU$cpc_plural${C2}${SEP1}${cpu_data_string} ${cpu_model}$model_plural (${cpu_type}) clocked at ${min_max_clock}${SEP2}${C1}Kernel${C2}${SEP1}${current_kernel}${SEP2}${C1}Up${C2}${SEP1}${up_time}${SEP2}${C1}Mem${C2}${SEP1}${memory}${SEP2}${C1}HDD${C2}${SEP1}${hdd_capacity}($hdd_used)${SEP2}${C1}Procs${C2}${SEP1}${processes}${SEP2}"
if [[ $SHOW_IRC -gt 0 ]];then
- short_data="${short_data} ${C1}Client${CN}[${C2}${SEP1}${IRC_CLIENT}${IRC_CLIENT_VERSION}${SEP1}${CN}]"
+ short_data="${short_data}${C1}Client${C2}${SEP1}${IRC_CLIENT}${IRC_CLIENT_VERSION}${SEP2}"
fi
- short_data="${short_data} ${C1}$SCRIPT_NAME${C2}${CN}[${C2}${SEP1}$SCRIPT_VERSION_NUMBER${SEP1}${CN}]"
+ short_data="${short_data}${C1}$SCRIPT_NAME${C2}${SEP1}$SCRIPT_VERSION_NUMBER$script_patch_number${SEP2}${CN}"
if [[ $SCHEME -gt 0 ]];then
short_data="${short_data} $NORMAL"
fi
print_audio_data()
{
eval $LOGFS
- local i='' card_one='Card-1' audio_data='' a_audio_data='' port_data='' pci_bus_id=''
+ local i='' card_id='' audio_data='' a_audio_data='' port_data='' pci_bus_id=''
local a_audio_working='' alsa_driver='' alsa_data='' port_plural='' module_version=''
+ local bus_usb_text='' bus_usb_id='' line_starter='Audio:' alsa='' alsa_version=''
# set A_AUDIO_DATA and get alsa data
get_audio_data
- alsa_data=$( get_audio_alsa_data )
- IFS=","
- a_audio_working=(${A_AUDIO_DATA[0]})
- IFS="$ORIGINAL_IFS"
-
- if [[ -n ${A_AUDIO_DATA[@]} ]];then
- # slightly complicated because 2nd array item could be the alsa data
- if [[ ${#A_AUDIO_DATA[@]} -le 1 ]];then
- card_one='Card'
- fi
-
-# if [[ -n ${a_audio_working[2]} ]];then
-# port_data=" ${C1}at port${C2} ${a_audio_working[2]}"
-# fi
- # this should only trigger if the $FILE_ASOUND_DEVICE data is used, not lspci -nn
- if [[ -n ${a_audio_working[3]} && $B_EXTRA_DATA == 'true' ]];then
- # note that for some reason, the module name is not the same as the module
- # loaded to kernel name for audio drivers, and you'll need to change the -
- module_version=$( print_module_version "${a_audio_working[3]}" 'audio' )
- elif [[ -n ${a_audio_working[1]} && $B_EXTRA_DATA == 'true' ]];then
- module_version=$( print_module_version "${a_audio_working[1]}" 'audio' )
- fi
- if [[ -n ${a_audio_working[1]} ]];then
- alsa_driver=" ${C1}driver${C2} ${a_audio_working[1]}$module_version"
- fi
- if [[ -n ${a_audio_working[2]} && $B_EXTRA_DATA == 'true' ]];then
- if [[ $( wc -w <<< ${a_audio_working[2]} ) -gt 1 ]];then
- port_plural='s'
- fi
- port_data=" ${C1}at port$port_plural${C2} ${a_audio_working[2]}"
+ get_audio_alsa_data
+ # alsa driver data now prints out no matter what
+ if [[ -n $A_ALSA_DATA ]];then
+ IFS=","
+ if [[ -n ${A_ALSA_DATA[0]} ]];then
+ alsa=${A_ALSA_DATA[0]}
+ else
+ alsa='N/A'
fi
- if [[ -n ${a_audio_working[4]} && $B_EXTRA_DATA == 'true' ]];then
- pci_bus_id=" ${C1}BusID:${C2} ${a_audio_working[4]}"
+ if [[ -n ${A_ALSA_DATA[1]} ]];then
+ alsa_version=${A_ALSA_DATA[1]}
+ else
+ alsa_version='N/A'
fi
- audio_data="${C1}$card_one${C2} ${a_audio_working[0]}$alsa_driver$port_data$pci_bus_id"
- audio_data=$( create_print_line "Audio:" "$audio_data" )
- print_screen_output "$audio_data"
- i=0 ## loop starts with 1 by auto-increment so it only shows cards > 1
- while [[ -n ${A_AUDIO_DATA[++i]} ]]
+ alsa_data="${C1}Sound:${C2} $alsa ${C1}ver$SEP3${C2} $alsa_version"
+ IFS="$ORIGINAL_IFS"
+ fi
+ # note, error handling is done in the get function, so this will never be null, but
+ # leaving the test just in case it's changed.
+ if [[ -n ${A_AUDIO_DATA[@]} ]];then
+ for (( i=0; i< ${#A_AUDIO_DATA[@]}; i++ ))
do
IFS=","
a_audio_working=( ${A_AUDIO_DATA[i]} )
IFS="$ORIGINAL_IFS"
port_data=''
alsa_driver=''
+ audio_data=''
port_plural=''
module_version=''
pci_bus_id=''
+ bus_usb_text=''
+ bus_usb_id=''
+ if [[ ${#A_AUDIO_DATA[@]} -gt 1 ]];then
+ card_id="-$(( $i + 1 ))"
+ fi
if [[ -n ${a_audio_working[3]} && $B_EXTRA_DATA == 'true' ]];then
module_version=$( print_module_version "${a_audio_working[3]}" 'audio' )
elif [[ -n ${a_audio_working[1]} && $B_EXTRA_DATA == 'true' ]];then
fi
# we're testing for the presence of the 2nd array item here, which is the driver name
if [[ -n ${a_audio_working[1]} ]];then
- alsa_driver="${C1}driver${C2} ${a_audio_working[1]}"
+ alsa_driver=" ${C1}driver$SEP3${C2} ${a_audio_working[1]}"
fi
if [[ -n ${a_audio_working[2]} && $B_EXTRA_DATA == 'true' ]];then
if [[ $( wc -w <<< ${a_audio_working[2]} ) -gt 1 ]];then
port_plural='s'
fi
- port_data=" ${C1}at port$port_plural${C2} ${a_audio_working[2]}"
+ port_data=" ${C1}port$port_plural$SEP3${C2} ${a_audio_working[2]}"
fi
if [[ -n ${a_audio_working[4]} && $B_EXTRA_DATA == 'true' ]];then
- pci_bus_id=" ${C1}BusID:${C2} ${a_audio_working[4]}"
+ if [[ ${a_audio_working[1]} != 'USB Audio' ]];then
+ bus_usb_text='bus-ID'
+ else
+ bus_usb_text='usb-ID'
+ fi
+ bus_usb_id=${a_audio_working[4]}
+ pci_bus_id=" ${C1}$bus_usb_text$SEP3${C2} $bus_usb_id"
fi
if [[ -n ${a_audio_working[0]} ]];then
- audio_data="${C1}Card-$(( $i + 1 ))${C2} ${a_audio_working[0]}$alsa_driver$port_data$pci_bus_id"
+ audio_data="${C1}Card$card_id:${C2} ${a_audio_working[0]}$alsa_driver$port_data$pci_bus_id"
+ fi
+ # only print alsa on last line if short enough, otherwise print on its own line
+ if [[ $i -eq 0 ]];then
+ if [[ -n $alsa_data && $( calculate_line_length "${audio_data}$alsa_data" ) -lt $LINE_MAX ]];then
+ audio_data="$audio_data $alsa_data"
+ alsa_data=''
+ fi
fi
if [[ -n $audio_data ]];then
- audio_data=$( create_print_line " " "$audio_data" )
+ audio_data=$( create_print_line "$line_starter" "$audio_data" )
print_screen_output "$audio_data"
+ line_starter=' '
fi
done
- # alsa driver data only prints out if sound card data is found
- if [[ -n $alsa_data ]];then
- audio_data="${C1}Sound:${C2} $alsa_data"
- audio_data=$( create_print_line " " "$audio_data" )
- print_screen_output "$audio_data"
- fi
+ fi
+ if [[ -n $alsa_data ]];then
+ alsa_data=$( sed 's/ALSA/Advanced Linux Sound Architecture/' <<< $alsa_data )
+ alsa_data=$( create_print_line "$line_starter" "$alsa_data" )
+ print_screen_output "$alsa_data"
fi
eval $LOGFE
}
fi
cpu_data=$( create_print_line "CPU$cpc_plural:" "${C1}${cpu_data_string}${C2} ${a_cpu_working[0]}$model_plural (${cpu_type})" )
- if [[ $VERBOSITY_LEVEL -ge 3 || $B_SHOW_CPU == 'true' ]];then
+ if [[ $B_SHOW_CPU == 'true' ]];then
# update for multicore, bogomips x core count.
if [[ $B_EXTRA_DATA == 'true' ]];then
# if [[ $cpu_vendor != 'intel' ]];then
# else
# bmip_data="${a_cpu_working[4]}"
# fi
- bmip_data=" ${C1}bmips${C2} $bmip_data"
+ bmip_data=" ${C1}bmips$SEP3${C2} $bmip_data"
fi
## note: this handles how intel reports L2, total instead of per core like AMD does
# note that we need to multiply by number of actual cpus here to get true cache size
# only print shortened list
if [[ $B_CPU_FLAGS_FULL != 'true' ]];then
cpu_flags=$( process_cpu_flags "${a_cpu_working[3]}" )
- cpu_flags=" ${C1}flags${C2} ($cpu_flags)"
+ cpu_flags=" ${C1}flags$SEP3${C2} ($cpu_flags)"
fi
- cpu_data="$cpu_data${C2} ${C1}cache${C2} $cpu_cache$cpu_flags$bmip_data${CN}"
+ cpu_data="$cpu_data${C2} ${C1}cache$SEP3${C2} $cpu_cache$cpu_flags$bmip_data${CN}"
fi
# we don't this printing out extra line unless > 1 cpu core
- if [[ ${#A_CPU_DATA[@]} -gt 2 ]] && [[ $B_SHOW_CPU == 'true' || $VERBOSITY_LEVEL -ge 5 ]];then
+ if [[ ${#A_CPU_DATA[@]} -gt 2 && $B_SHOW_CPU == 'true' ]];then
cpu_clock_speed='' # null < verbosity level 5
else
cpu_data="$cpu_data ${C1}clocked at${C2} ${a_cpu_working[1]} MHz${CN}"
print_screen_output "$cpu_data"
# we don't this printing out extra line unless > 1 cpu core
- if [[ ${#A_CPU_DATA[@]} -gt 2 ]] && [[ $B_SHOW_CPU == 'true' || $VERBOSITY_LEVEL -ge 5 ]];then
+ if [[ ${#A_CPU_DATA[@]} -gt 2 && $B_SHOW_CPU == 'true' ]];then
for (( i=0; i < ${#A_CPU_DATA[@]}-1; i++ ))
do
IFS=","
a_cpu_working=(${A_CPU_DATA[i]})
IFS="$ORIGINAL_IFS"
# note: the first iteration will create a first space, for color code separation below
- cpu_multi_clock_data="$cpu_multi_clock_data ${C1}($(( i + 1 )))${C2} ${a_cpu_working[1]} MHz${CN}"
- if [[ $i -gt 10 ]];then
- break
- fi
+ cpu_multi_clock_data="$cpu_multi_clock_data ${C1}$(( i + 1 )):${C2} ${a_cpu_working[1]} MHz${CN}"
+ # someone actually appeared with a 16 core system, so going to stop the cpu core throttle
+ # if this had some other purpose which we can't remember we'll add it back in
+ #if [[ $i -gt 10 ]];then
+ # break
+ #fi
done
if [[ -n $cpu_multi_clock_data ]];then
cpu_multi_clock_data=$( create_print_line " " "${C1}Clock Speeds:${C2}$cpu_multi_clock_data" )
for (( i=0; i < ${#a_cpu_flags[@]};i++ ))
do
if [[ $i -eq 0 ]];then
- line_starter="${C1}CPU Flags${C2} "
+ line_starter="${C1}CPU Flags$SEP3${C2} "
else
line_starter=''
fi
print_gfx_data()
{
eval $LOGFS
- local gfx_data='' i='' card_one='Card' root_alert='' root_x_string=''
+ local gfx_data='' i='' card_id='' root_alert='' root_x_string='' a_gfx_working=''
+ local b_is_mesa='false' display_full_string='' gfx_bus_id='' gfx_card_data=''
+ local res_tty='Resolution' xorg_data='' x_vendor_string=''
+ local spacer='' x_driver='' x_driver_string='' x_driver_plural='' direct_render_string=''
+ local separator_loaded='' separator_unloaded='' separator_failed=''
+ local loaded='' unloaded='' failed=''
+ local line_starter='Graphics:'
local screen_resolution="$( get_graphics_res_data )"
- local b_is_mesa='false' display_full_string=''
# set A_GFX_CARD_DATA
get_graphics_card_data
# set A_X_DATA
local glx_version="${A_GLX_DATA[1]}"
# this can contain a long No case debugging message, so it's being sliced off
# note: using grep -ioE '(No|Yes)' <<< ${A_GLX_DATA[2]} did not work in Arch, no idea why
- local glx_direct_render=$( gawk '{
- print $1
- }' <<< "${A_GLX_DATA[2]}" )
+ local glx_direct_render=$( gawk '{print $1}' <<< "${A_GLX_DATA[2]}" )
+
+ # set A_GRAPHIC_DRIVERS
+ get_graphics_driver
+
+ if [[ ${#A_GRAPHIC_DRIVERS[@]} -eq 0 ]];then
+ x_driver=' N/A'
+ else
+ for (( i=0; i < ${#A_GRAPHIC_DRIVERS[@]}; i++ ))
+ do
+ IFS=","
+ a_gfx_working=( ${A_GRAPHIC_DRIVERS[i]} )
+ IFS="$ORIGINAL_IFS"
+ case ${a_gfx_working[1]} in
+ loaded)
+ loaded="$loaded$separator_loaded${a_gfx_working[0]}"
+ separator_loaded=','
+ ;;
+ unloaded)
+ unloaded="$unloaded$separator_unloaded${a_gfx_working[0]}"
+ separator_unloaded=','
+ ;;
+ failed)
+ failed="$failed$separator_failed${a_gfx_working[0]}"
+ separator_failed=','
+ ;;
+ esac
+ done
+ fi
+ if [[ -n $loaded ]];then
+ x_driver="${x_driver} $loaded"
+ fi
+ if [[ -n $unloaded ]];then
+ x_driver="${x_driver} (unloaded: $unloaded)"
+ fi
+ if [[ -n $failed ]];then
+ x_driver="${x_driver} ${RED}FAILED:${C2} $failed"
+ fi
+
+ if [[ ${#A_GRAPHIC_DRIVERS[@]} -gt 1 ]];then
+ x_driver_plural='s'
+ fi
+ x_driver_string="${C1}driver$x_driver_plural$SEP3${C2}$x_driver "
+
# some basic error handling:
if [[ -z $screen_resolution ]];then
screen_resolution='N/A'
fi
-
- if [[ $B_X_RUNNING == 'true' && $B_ROOT != 'true' ]];then
- if [[ -z $x_vendor || -z $x_version ]];then
- x_vendor='X-Vendor: N/A'
- fi
- display_full_string="${C1}$x_vendor${C2} $x_version ${C1}Res:${C2} ${screen_resolution} "
+ if [[ -z $x_vendor || -z $x_version ]];then
+ x_vendor_string="${C1}X-Vendor:${C2} N/A "
else
- root_x_string=''
- if [[ $B_ROOT == 'true' ]];then
- root_x_string='for root '
- fi
- if [[ $B_X_RUNNING != 'true' ]];then
- root_x_string="${root_x_string}out of X"
- fi
- if [[ -n $x_vendor && -n $x_version ]];then
- display_full_string="${C1}$x_vendor${C2} $x_version ${C1}Res:${C2} ${screen_resolution} ${C1}Gfx Data:${C2} N/A $root_x_string"
- elif [[ $B_X_RUNNING == 'true' && $B_ROOT == 'true' ]];then
- root_alert="${C1}Gfx Data:${C2} N/A for root user"
- display_full_string="${C1}tty res:${C2} ${screen_resolution} $root_alert"
+ x_vendor_string="${C1}$x_vendor$SEP3${C2} $x_version "
+ fi
+
+ if [[ $B_ROOT == 'true' ]];then
+ root_x_string='for root '
+ if [[ $B_RUNNING_IN_SHELL == 'true' || $B_CONSOLE_IRC == 'true' ]];then
+ res_tty='tty size'
fi
fi
+ if [[ $B_RUNNING_IN_X != 'true' ]];then
+ root_x_string="${root_x_string}out of X"
+ res_tty='tty size'
+ fi
+
+ if [[ -n $root_x_string ]];then
+ root_x_string="${C1}Advanced Data:${C2} N/A $root_x_string"
+ fi
- if [[ ${#A_GFX_CARD_DATA[@]} -gt 1 ]];then
- i=1
- while [[ -n ${A_GFX_CARD_DATA[i]} && $i -le 3 ]]
+ display_full_string="$x_vendor_string$x_driver_string${C1}${res_tty}$SEP3${C2} ${screen_resolution} $root_x_string"
+
+ if [[ ${#A_GFX_CARD_DATA[@]} -gt 0 ]];then
+ for (( i=0; i < ${#A_GFX_CARD_DATA[@]}; i++ ))
do
- gfx_data=" ${C1}Card-$(($i+1))${C2} ${A_GFX_CARD_DATA[i]}"
- ((i++))
+ IFS=","
+ a_gfx_working=( ${A_GFX_CARD_DATA[i]} )
+ IFS="$ORIGINAL_IFS"
+ gfx_bus_id=''
+ gfx_card_data=${a_gfx_working[0]}
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ if [[ -n ${a_gfx_working[1]} ]];then
+ gfx_bus_id=" ${C1}bus-ID$SEP3${C2} ${a_gfx_working[1]}"
+ else
+ gfx_bus_id=" ${C1}bus-ID$SEP3${C2} N/A"
+ fi
+ fi
+ if [[ ${#A_GFX_CARD_DATA[@]} -gt 1 ]];then
+ card_id="Card-$(($i+1)):"
+ else
+ card_id='Card:'
+ fi
+ gfx_data="${C1}$card_id${C2} $gfx_card_data$gfx_bus_id "
+ if [[ ${#A_GFX_CARD_DATA[@]} -gt 1 ]];then
+ gfx_data=$( create_print_line "$line_starter" "${gfx_data}" )
+ print_screen_output "$gfx_data"
+ line_starter=' '
+ gfx_data=''
+ fi
done
- card_one='Card-1'
+ # handle cases where card detection fails, like in PS3, where lspci gives no output, or headless boxes..
+ else
+ gfx_data="${C1}Card:${C2} Failed to Detect Video Card! "
+ fi
+ if [[ -n $gfx_data && $( calculate_line_length "${gfx_data}$display_full_string" ) -lt $LINE_MAX ]];then
+ gfx_data=$( create_print_line "$line_starter" "${gfx_data}$display_full_string" )
+ else
+ if [[ -n $gfx_data ]];then
+ gfx_data=$( create_print_line "$line_starter" "$gfx_data" )
+ print_screen_output "$gfx_data"
+ line_starter=' '
+ fi
+ gfx_data=$( create_print_line "$line_starter" "$display_full_string" )
fi
- gfx_data=$( create_print_line "Graphics:" "${C1}$card_one${C2} ${A_GFX_CARD_DATA[0]}${gfx_data} $display_full_string" )
print_screen_output "$gfx_data"
-
# if [[ -z $glx_renderer || -z $glx_version ]];then
# b_is_mesa='true'
# fi
## note: if glx render or version have no content, then mesa is true
- # if [[ $B_X_RUNNING == 'true' ]] && [[ $b_is_mesa != 'true' ]];then
- if [[ $B_X_RUNNING == 'true' && $B_ROOT != 'true' ]];then
+ # if [[ $B_SHOW_X_DATA == 'true' ]] && [[ $b_is_mesa != 'true' ]];then
+ if [[ $B_SHOW_X_DATA == 'true' && $B_ROOT != 'true' ]];then
if [[ -z $glx_renderer ]];then
glx_renderer='N/A'
fi
if [[ -z $glx_direct_render ]];then
glx_direct_render='N/A'
fi
- gfx_data=$( create_print_line " " "${C1}GLX Renderer${C2} ${glx_renderer} ${C1}GLX Version${C2} ${glx_version}${CN}" )
if [[ $B_HANDLE_CORRUPT_DATA == 'true' || $B_EXTRA_DATA == 'true' ]];then
- gfx_data="$gfx_data ${C1}Direct Rendering${C2} ${glx_direct_render}${CN}"
+ direct_render_string=" ${C1}Direct Rendering$SEP3${C2} ${glx_direct_render}${CN}"
fi
+ gfx_data="${C1}GLX Renderer$SEP3${C2} ${glx_renderer} ${C1}GLX Version$SEP3${C2} ${glx_version}${CN}$direct_render_string"
+ gfx_data=$( create_print_line " " "$gfx_data" )
+
print_screen_output "$gfx_data"
fi
eval $LOGFE
eval $LOGFS
local hdd_data='' hdd_data_2='' a_hdd_working='' hdd_temp_data='' hdd_string=''
local dev_data='' size_data='' hdd_model='' usb_data='' hdd_name='' divisor=5
+ local Line_Starter='Drives:' # inherited by print_optical_drives
# load A_HDD_DATA
get_hdd_data_basic
local hdd_capacity=${a_hdd_basic_working[0]}
local hdd_used=${a_hdd_basic_working[1]}
- if [[ $VERBOSITY_LEVEL -ge 3 || $B_SHOW_DISK == 'true' ]];then
+ if [[ $B_SHOW_BASIC_DISK == 'true' || $B_SHOW_DISK == 'true' ]];then
## note: the output part of this should be in the print hdd data function, not here
get_hard_drive_data_advanced
for (( i=0; i < ${#A_HDD_DATA[@]} - 1; i++ ))
IFS=","
a_hdd_working=( ${A_HDD_DATA[i]} )
IFS="$ORIGINAL_IFS"
- if [[ $B_SHOW_DISK == 'true' || $VERBOSITY_LEVEL -ge 5 ]];then
+ if [[ $B_SHOW_DISK == 'true' ]];then
if [[ -n ${a_hdd_working[3]} ]];then
usb_data="${a_hdd_working[3]} "
else
# printing line one, then new lines according to $divisor setting, and after, if leftovers, print that line.
case $i in
0)
- hdd_data=$( create_print_line "Disks:" "${C1}HDD${C2} ${C1}Total Size:${C2} ${hdd_capacity} (${hdd_used}) ${hdd_model}" )
+ hdd_data=$( create_print_line "$Line_Starter" "${C1}HDD Total Size:${C2} ${hdd_capacity} (${hdd_used}) ${hdd_model}" )
print_screen_output "$hdd_data"
hdd_model=''
+ Line_Starter=' '
;;
*)
# using modulus here, if divisible by $divisor, print line, otherwise skip
if [[ $(( $i % $divisor )) -eq 0 ]];then
- hdd_data=$( create_print_line " " "${hdd_model}${CN}" )
+ hdd_data=$( create_print_line "$Line_Starter" "${hdd_model}${CN}" )
print_screen_output "$hdd_data"
hdd_model=''
+ Line_Starter=' '
fi
;;
esac
done
# then print any leftover items
if [[ -n $hdd_model ]];then
- hdd_data=$( create_print_line " " "${hdd_model}${CN}" )
+ hdd_data=$( create_print_line "$Line_Starter" "${hdd_model}${CN}" )
print_screen_output "$hdd_data"
fi
else
- hdd_data=$( create_print_line "Disks:" "${C1}HDD Total Size:${C2} ${hdd_capacity} (${hdd_used})${CN}" )
+ hdd_data=$( create_print_line "$Line_Starter" "${C1}HDD Total Size:${C2} ${hdd_capacity} (${hdd_used})${CN}" )
print_screen_output "$hdd_data"
+ Line_Starter=' '
+ fi
+ if [[ $B_SHOW_FULL_OPTICAL == 'true' || $B_SHOW_BASIC_OPTICAL == 'true' ]];then
+ print_optical_drive_data
fi
eval $LOGFE
{
eval $LOGFS
- local info_data=''
- local runlvl=''
+ local info_data='' line_starter='Info:'
+ local runlvl='' client_data=''
local memory="$( get_memory_data )"
local processes="$(( $( ps aux | wc -l ) - 1 ))"
local up_time="$( get_uptime )"
+ local script_patch_number=$( get_patch_version_string )
+ local gcc_string='' gcc_installed='' gcc_others='' closing_data=''
+
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ get_gcc_system_version
+ if [[ ${#A_GCC_VERSIONS[@]} -gt 0 ]];then
+ if [[ -n ${A_GCC_VERSIONS[0]} ]];then
+ gcc_installed=${A_GCC_VERSIONS[0]}
+ else
+ gcc_installed='N/A'
+ fi
+ if [[ $B_EXTRA_EXTRA_DATA == 'true' && -n ${A_GCC_VERSIONS[1]} ]];then
+ gcc_others=" ${C1}alt$SEP3${C2} $( tr ',' '/' <<< ${A_GCC_VERSIONS[1]} )"
+ fi
+ gcc_installed="${C1}Gcc sys$SEP3${C2} $gcc_installed$gcc_others "
+ fi
+ fi
# Some code could look superfluous but BitchX doesn't like lines not ending in a newline. F*&k that bitch!
- # long_last=$( echo -ne "${C1}Processes${C2} ${processes}${CN} | ${C1}Uptime${C2} ${up_time}${CN} | ${C1}Memory${C2} ${MEM}${CN}" )
- info_data=$( create_print_line "Info:" "${C1}Processes${C2} ${processes} ${C1}Uptime${C2} ${up_time} ${C1}Memory${C2} ${memory}${CN}" )
+ # long_last=$( echo -ne "${C1}Processes$SEP3${C2} ${processes}${CN} | ${C1}Uptime$SEP3${C2} ${up_time}${CN} | ${C1}Memory$SEP3${C2} ${MEM}${CN}" )
+ info_data="${C1}Processes$SEP3${C2} ${processes} ${C1}Uptime$SEP3${C2} ${up_time} ${C1}Memory$SEP3${C2} ${memory}${CN} "
# this only triggers if no X data is present or if extra data switch is on
- if [[ $B_X_RUNNING != 'true' || $B_EXTRA_DATA == 'true' ]];then
+ if [[ $B_SHOW_X_DATA != 'true' || $B_EXTRA_DATA == 'true' ]];then
runlvl="$( get_runlevel_data )"
if [[ -n $runlvl ]];then
- info_data="${info_data} ${C1}Runlevel${C2} ${runlvl}${CN}"
+ info_data="${info_data}${C1}Runlevel$SEP3${C2} ${runlvl} "
fi
fi
-
if [[ $SHOW_IRC -gt 0 ]];then
- info_data="${info_data} ${C1}Client${C2} ${IRC_CLIENT}${IRC_CLIENT_VERSION}${CN}"
+ client_data="${C1}Client$SEP3${C2} ${IRC_CLIENT}${IRC_CLIENT_VERSION} "
+ fi
+ info_data="${info_data}$gcc_installed"
+ closing_data="$client_data${C1}$SCRIPT_NAME$SEP3${C2} $SCRIPT_VERSION_NUMBER$script_patch_number${CN}"
+ if [[ -n $info_data && $( calculate_line_length "$info_data$closing_data" ) -gt $LINE_MAX ]];then
+ info_data=$( create_print_line "$line_starter" "$info_data" )
+ print_screen_output "$info_data"
+ info_data="$closing_data"
+ line_starter=' '
+ else
+ info_data="${info_data}$closing_data"
fi
- info_data="${info_data} ${C1}$SCRIPT_NAME${C2} $SCRIPT_VERSION_NUMBER${CN}"
-
+ info_data=$( create_print_line "$line_starter" "$info_data" )
if [[ $SCHEME -gt 0 ]];then
info_data="${info_data} ${NORMAL}"
fi
eval $LOGFE
}
+print_machine_data()
+{
+ eval $LOGFS
+
+ local system_line='' mobo_line='' bios_line='' chassis_line=''
+ local mobo_vendor='' mobo_model='' mobo_version='' mobo_serial=''
+ local bios_vendor='' bios_version='' bios_date=''
+ local system_vendor='' product_name='' product_version='' product_serial='' product_uuid=''
+ local chassis_vendor='' chassis_type='' chassis_version='' chassis_serial=''
+ local b_skip_system='false' b_skip_chassis='false'
+ # set A_MACHINE_DATA
+ get_machine_data
+
+ IFS=','
+ ## keys for machine data are:
+ # 0-sys_vendor 1-product_name 2-product_version 3-product_serial 4-product_uuid
+ # 5-board_vendor 6-board_name 7-board_version 8-board_serial
+ # 9-bios_vendor 10-bios_version 11-bios_date
+ ## with extra data:
+ # 12-chassis_vendor 13-chassis_type 14-chassis_version 15-chassis_serial
+
+ if [[ ${#A_MACHINE_DATA[@]} -gt 0 ]];then
+ # note: in some case a mobo/version will match a product name/version, do not print those
+ # but for laptops, or even falsely id'ed desktops with batteries, let's print it all if it matches
+ # there can be false id laptops if battery appears so need to make sure system is filled
+ if [[ -z ${A_MACHINE_DATA[0]} ]];then
+ b_skip_system='true'
+ else
+ if [[ $B_PORTABLE != 'true' ]];then
+ # ibm / ibm can be true; dell / quantum is false, so in other words, only do this
+ # in case where the vendor is the same and the version is the same and not null,
+ # otherwise the version information is going to be different in all cases I think
+ if [[ -n ${A_MACHINE_DATA[0]} && ${A_MACHINE_DATA[0]} == ${A_MACHINE_DATA[5]} ]];then
+ if [[ -n ${A_MACHINE_DATA[2]} && ${A_MACHINE_DATA[2]} == ${A_MACHINE_DATA[7]} ]] || \
+ [[ -z ${A_MACHINE_DATA[2]} && ${A_MACHINE_DATA[1]} == ${A_MACHINE_DATA[6]} ]];then
+ b_skip_system='true'
+ fi
+ fi
+ fi
+ fi
+ # no point in showing chassis if system isn't there, it's very unlikely that would be correct
+ if [[ $B_EXTRA_EXTRA_DATA == 'true' && $b_skip_system != 'true' ]];then
+ if [[ -n ${A_MACHINE_DATA[7]} && ${A_MACHINE_DATA[14]} == ${A_MACHINE_DATA[7]} ]];then
+ b_skip_chassis='true'
+ fi
+ if [[ -n ${A_MACHINE_DATA[12]} && $b_skip_chassis != 'true' ]];then
+ # no need to print the vendor string again if it's the same
+ if [[ ${A_MACHINE_DATA[12]} != ${A_MACHINE_DATA[0]} ]];then
+ chassis_vendor=" ${A_MACHINE_DATA[12]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[13]} ]];then
+ chassis_type=" ${C1}type$SEP3${C2} ${A_MACHINE_DATA[13]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[14]} ]];then
+ chassis_version=" ${C1}version$SEP3${C2} ${A_MACHINE_DATA[14]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[15]} && $B_OUTPUT_FILTER != 'true' ]];then
+ chassis_serial=" ${C1}serial$SEP3${C2} ${A_MACHINE_DATA[15]}"
+ fi
+ if [[ -n "$chassis_vendor$chassis_type$chassis_version$chassis_serial" ]];then
+ chassis_line="${C1}Chassis$SEP3${C2}$chassis_vendor$chassis_type$chassis_version$chassis_serial"
+ fi
+ fi
+ fi
+ if [[ -n ${A_MACHINE_DATA[5]} ]];then
+ mobo_vendor=${A_MACHINE_DATA[5]}
+ else
+ mobo_vendor='N/A'
+ fi
+ if [[ -n ${A_MACHINE_DATA[6]} ]];then
+ mobo_model=${A_MACHINE_DATA[6]}
+ else
+ mobo_model='N/A'
+ fi
+ if [[ -n ${A_MACHINE_DATA[7]} ]];then
+ mobo_version=" ${C1}version$SEP3${C2} ${A_MACHINE_DATA[7]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[8]} && $B_OUTPUT_FILTER != 'true' ]];then
+ mobo_serial=" ${C1}serial$SEP3${C2} ${A_MACHINE_DATA[8]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[9]} ]];then
+ bios_vendor=${A_MACHINE_DATA[9]}
+ else
+ bios_vendor='N/A'
+ fi
+ if [[ -n ${A_MACHINE_DATA[10]} ]];then
+ bios_version=${A_MACHINE_DATA[10]}
+ else
+ bios_version='N/A'
+ fi
+ if [[ -n ${A_MACHINE_DATA[11]} ]];then
+ bios_date=${A_MACHINE_DATA[11]}
+ else
+ bios_date='N/A'
+ fi
+ mobo_line="${C1}Mobo$SEP3${C2} $mobo_vendor ${C1}model$SEP3${C2} $mobo_model$mobo_version$mobo_serial"
+ bios_line="${C1}Bios$SEP3${C2} $bios_vendor ${C1}version$SEP3${C2} $bios_version ${C1}date$SEP3${C2} $bios_date"
+ if [[ $( calculate_line_length "$mobo_line$bios_line" ) -lt $LINE_MAX ]];then
+ mobo_line="$mobo_line $bios_line"
+ bios_line=''
+ fi
+ if [[ $b_skip_system == 'true' ]];then
+ system_line=$mobo_line
+ mobo_line=''
+ else
+ # this has already been tested for above so we know it's not null
+ system_vendor=${A_MACHINE_DATA[0]}
+ if [[ $B_PORTABLE == 'true' ]];then
+ system_vendor="$system_vendor (portable)"
+ fi
+ if [[ -n ${A_MACHINE_DATA[1]} ]];then
+ product_name=${A_MACHINE_DATA[1]}
+ else
+ product_name='N/A'
+ fi
+ if [[ -n ${A_MACHINE_DATA[2]} ]];then
+ product_version=" ${C1}version$SEP3${C2} ${A_MACHINE_DATA[2]}"
+ fi
+ if [[ -n ${A_MACHINE_DATA[3]} && $B_OUTPUT_FILTER != 'true' ]];then
+ product_serial=" ${C1}serial$SEP3${C2} ${A_MACHINE_DATA[3]} "
+ fi
+ system_line="${C1}System$SEP3${C2} $system_vendor ${C1}product$SEP3${C2} $product_name$product_version$product_serial"
+ if [[ -n $chassis_line && $( calculate_line_length "$system_line$chassis_line" ) -lt $LINE_MAX ]];then
+ system_line="$system_line $chassis_line"
+ chassis_line=''
+ fi
+ fi
+ IFS="$ORIGINAL_IFS"
+ else
+ system_line="${C2}No /sys/class/dmi machine data. Try newer kernel, or install dmidecode.${CN}"
+ fi
+ # patch to dump all of above if dmidecode was data source and non root user
+ if [[ ${A_MACHINE_DATA[0]} == 'dmidecode-non-root-user' || ${A_MACHINE_DATA[0]} == 'dmidecode-no-smbios-dmi-data' ]];then
+ if [[ ${A_MACHINE_DATA[0]} == 'dmidecode-non-root-user' ]];then
+ system_line="${C2}No /sys/class/dmi. Using dmidecode: you must be root to run dmidecode.${CN}"
+ elif [[ ${A_MACHINE_DATA[0]} == 'dmidecode-no-smbios-dmi-data' ]];then
+ system_line="${C2}No /sys/class/dmi. Using dmidecode: no machine data available.${CN}"
+ fi
+ mobo_line=''
+ bios_line=''
+ chassis_line=''
+ fi
+ system_line=$( create_print_line "Machine:" "$system_line" )
+ print_screen_output "$system_line"
+ if [[ -n $mobo_line ]];then
+ mobo_line=$( create_print_line " " "$mobo_line" )
+ print_screen_output "$mobo_line"
+ fi
+ if [[ -n $bios_line ]];then
+ bios_line=$( create_print_line " " "$bios_line" )
+ print_screen_output "$bios_line"
+ fi
+ if [[ -n $chassis_line ]];then
+ chassis_line=$( create_print_line " " "$chassis_line" )
+ print_screen_output "$chassis_line"
+ fi
+
+ eval $LOGFE
+}
+
# args: $1 - module name (could be > 1, so loop it ); $2 - audio (optional)
print_module_version()
{
done
if [[ -n $module_versions ]];then
- echo " ${C1}v:${C2}$module_versions"
+ echo " ${C1}ver$SEP3${C2}$module_versions"
fi
eval $LOGFE
}
print_networking_data()
{
eval $LOGFS
- local i='' card_one='Card-1' network_data='' a_network_working='' port_data='' driver_data=''
- local card_string='' port_plural='' module_version='' pci_bus_id=''
+ local i='' card_id='' network_data='' a_network_working='' port_data='' driver_data=''
+ local card_string='' port_plural='' module_version='' pci_bus_id='' bus_usb_text=''
+ local bus_usb_id='' line_starter='Network:' card_string='' card_data=''
# set A_NETWORK_DATA
get_networking_data
- IFS=","
- a_network_working=(${A_NETWORK_DATA[0]})
- IFS="$ORIGINAL_IFS"
-
# will never be null because null is handled in get_network_data, but in case we change
# that leaving this test in place.
if [[ -n ${A_NETWORK_DATA[@]} ]];then
- if [[ ${#A_NETWORK_DATA[@]} -le 1 ]];then
- card_one='Card'
- fi
- if [[ -n ${a_network_working[1]} && $B_EXTRA_DATA == 'true' ]];then
- module_version=$( print_module_version "${a_network_working[1]}" )
- fi
- if [[ -n ${a_network_working[1]} ]];then
- driver_data=" ${C1}driver${C2} ${a_network_working[1]}$module_version"
- fi
- if [[ -n ${a_network_working[2]} && $B_EXTRA_DATA == 'true' ]];then
- if [[ $( wc -w <<< ${a_network_working[2]} ) -gt 1 ]];then
- port_plural='s'
- fi
- port_data=" ${C1}at port$port_plural${C2} ${a_network_working[2]}"
- fi
- if [[ -n ${a_network_working[4]} && $B_EXTRA_DATA == 'true' ]];then
- pci_bus_id=" ${C1}BusID:${C2} ${a_network_working[4]}"
- fi
-
- card_string=''
- network_data="${C1}$card_one${C2} ${a_network_working[0]}$driver_data$port_data$pci_bus_id"
- network_data=$( create_print_line "Network:" "$network_data" )
- print_screen_output "$network_data"
- i=0 ## loop starts with 1 by auto-increment so it only shows cards > 1
- while [[ -n ${A_NETWORK_DATA[++i]} ]]
+ for (( i=0; i < ${#A_NETWORK_DATA[@]}; i++ ))
do
IFS=","
a_network_working=( ${A_NETWORK_DATA[i]} )
IFS="$ORIGINAL_IFS"
- port_data=''
+ bus_usb_id=''
+ bus_usb_text=''
+ card_data=''
+ card_string=''
driver_data=''
- port_plural=''
module_version=''
+ network_data=''
pci_bus_id=''
+ port_data=''
+ port_plural=''
+
+ if [[ ${#A_NETWORK_DATA[@]} -gt 1 ]];then
+ card_id="-$(( $i + 1 ))"
+ fi
if [[ -n ${a_network_working[1]} && $B_EXTRA_DATA == 'true' ]];then
module_version=$( print_module_version "${a_network_working[1]}" )
fi
if [[ -n ${a_network_working[1]} ]];then
- driver_data=" ${C1}driver${C2} ${a_network_working[1]}$module_version"
+ driver_data="${C1}driver$SEP3${C2} ${a_network_working[1]}$module_version "
fi
if [[ -n ${a_network_working[2]} && $B_EXTRA_DATA == 'true' ]];then
if [[ $( wc -w <<< ${a_network_working[2]} ) -gt 1 ]];then
port_plural='s'
fi
- port_data=" ${C1}at port$port_plural${C2} ${a_network_working[2]}"
+ port_data="${C1}port$port_plural$SEP3${C2} ${a_network_working[2]} "
fi
if [[ -n ${a_network_working[4]} && $B_EXTRA_DATA == 'true' ]];then
- pci_bus_id=" ${C1}BusID:${C2} ${a_network_working[4]}"
+ if [[ -z $( grep '^usb-' <<< ${a_network_working[4]} ) ]];then
+ bus_usb_text='bus-ID'
+ bus_usb_id=${a_network_working[4]}
+ else
+ bus_usb_text='usb-ID'
+ bus_usb_id=$( cut -d '-' -f '2-4' <<< ${a_network_working[4]} )
+ fi
+ pci_bus_id="${C1}$bus_usb_text$SEP3${C2} $bus_usb_id"
+ fi
+ card_string="${C1}Card$card_id:${C2} ${a_network_working[0]} "
+ card_data="$driver_data$port_data$pci_bus_id"
+ if [[ $( calculate_line_length "$card_string$card_data" ) -gt $LINE_MAX ]];then
+ network_data=$( create_print_line "$line_starter" "$card_string" )
+ line_starter=' '
+ card_string=''
+ print_screen_output "$network_data"
fi
- network_data="${C1}Card-$(( $i + 1 ))${C2} ${a_network_working[0]}$driver_data$port_data$pci_bus_id"
- network_data=$( create_print_line " " "$network_data" )
+ network_data=$( create_print_line "$line_starter" "$card_string$card_data" )
+ line_starter=' '
print_screen_output "$network_data"
+ if [[ $B_SHOW_ADVANCED_NETWORK == 'true' ]];then
+ print_network_advanced_data
+ fi
done
fi
if [[ $B_SHOW_IP == 'true' ]];then
eval $LOGFE
}
+print_network_advanced_data()
+{
+ eval $LOGFS
+ local network_data='' if_id='N/A' duplex='N/A' mac_id='N/A' speed='N/A' oper_state='N/A'
+ local b_is_wifi='false' speed_string='' duplex_string=''
+
+ # first check if it's a known wifi id'ed card, if so, no print of duplex/speed
+ if [[ -n $( grep -Esi '(wireless|wifi|wi-fi|wlan|802\.11|centrino)' <<< ${a_network_working[0]} ) ]];then
+ b_is_wifi='true'
+ fi
+ if [[ -n ${a_network_working[5]} ]];then
+ if_id=${a_network_working[5]}
+ fi
+ if [[ -n ${a_network_working[6]} ]];then
+ oper_state=${a_network_working[6]}
+ fi
+ # no print out for wifi since it doesn't have duplex/speed data availabe
+ # note that some cards show 'unknown' for state, so only testing explicitly
+ # for 'down' string in that to skip showing speed/duplex
+ if [[ $b_is_wifi != 'true' && $oper_state != 'down' ]];then
+ if [[ -n ${a_network_working[7]} ]];then
+ # make sure the value is strictly numeric before appending Mbps
+ if [[ -n $( grep -E '^[0-9\.,]+$' <<< "${a_network_working[7]}" ) ]];then
+ speed="${a_network_working[7]} Mbps"
+ else
+ speed=${a_network_working[7]}
+ fi
+ fi
+ speed_string="${C1}speed$SEP3${C2} $speed "
+ if [[ -n ${a_network_working[8]} ]];then
+ duplex=${a_network_working[8]}
+ fi
+ duplex_string="${C1}duplex$SEP3${C2} $duplex "
+ fi
+ if [[ -n ${a_network_working[9]} ]];then
+ if [[ $B_OUTPUT_FILTER == 'true' ]];then
+ mac_id=$FILTER_STRING
+ else
+ mac_id=${a_network_working[9]}
+ fi
+ fi
+ network_data="${C1}IF:${C2} $if_id ${C1}state$SEP3${C2} $oper_state $speed_string$duplex_string${C1}mac$SEP3${C2} $mac_id"
+ network_data=$( create_print_line " " "$network_data" )
+ print_screen_output "$network_data"
+
+ eval $LOGFE
+}
+
print_networking_ip_data()
{
eval $LOGFS
local ip=$( get_networking_wan_ip_data )
- local ip_data='' a_interfaces_working='' interfaces='' interfaces_2='' i=''
+ local wan_ip_data='' a_interfaces_working='' interfaces='' i=''
+ local if_id='' if_ip='' if_ipv6='' if_ipv6_string='' full_string='' if_string=''
+ local if_id_string='' if_ip_string=''
+ local line_max=$(( $LINE_MAX - 50 ))
# set A_INTERFACES_DATA
get_networking_local_ip_data
# first print output for wan ip line. Null is handled in the get function
- ip_data=$( create_print_line " " "${C1}Wan IP:${C2} $ip" )
-
+ if [[ -z $ip ]];then
+ ip='N/A'
+ else
+ if [[ $B_OUTPUT_FILTER == 'true' ]];then
+ ip=$FILTER_STRING
+ fi
+ fi
+ wan_ip_data="${C1}WAN IP:${C2} $ip "
# then create the list of local interface/ip
- interfaces=" ${C1}Interface:${C2}"
i=0 ## loop starts with 1 by auto-increment so it only shows cards > 1
while [[ -n ${A_INTERFACES_DATA[i]} ]]
do
IFS=","
a_interfaces_working=(${A_INTERFACES_DATA[i]})
IFS="$ORIGINAL_IFS"
- if [[ $i -lt 3 ]];then
- if [[ -n ${a_interfaces_working[0]} ]];then
- interfaces="$interfaces ${C1}${a_interfaces_working[0]}${C2} ${a_interfaces_working[1]}"
+ if_id='N/A'
+ if_ip='N/A'
+ if_ipv6='N/A'
+ if_ipv6_string=''
+ if [[ -z $( grep '^Interface' <<< ${a_interfaces_working[0]} ) ]];then
+ if [[ -n ${a_interfaces_working[1]} ]];then
+ if [[ $B_OUTPUT_FILTER == 'true' ]];then
+ if_ip=$FILTER_STRING
+ else
+ if_ip=${a_interfaces_working[1]}
+ fi
fi
- else
- if [[ -n ${a_interfaces_working[0]} ]];then
- # space on end here for lining up with line starter
- interfaces_2="$interfaces_2${C1}${a_interfaces_working[0]}${C2} ${a_interfaces_working[1]} "
+ if_ip_string=" ${C1}ip$SEP3${C2} $if_ip"
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ if [[ -n ${a_interfaces_working[3]} ]];then
+ if [[ $B_OUTPUT_FILTER == 'true' ]];then
+ if_ipv6=$FILTER_STRING
+ else
+ if_ipv6=${a_interfaces_working[3]}
+ fi
+ fi
+ if_ipv6_string=" ${C1}ip-v6$SEP3${C2} $if_ipv6"
fi
fi
+ if [[ -n ${a_interfaces_working[0]} ]];then
+ if_id=${a_interfaces_working[0]}
+ fi
+ if_string="$wan_ip_data$if_string${C1}IF:${C2} $if_id$if_ip_string$if_ipv6_string "
+ wan_ip_data=''
+ if [[ $( calculate_line_length "$if_string" ) -gt $line_max ]];then
+ full_string=$( create_print_line " " "$if_string" )
+ print_screen_output "$full_string"
+ if_string=''
+ fi
((i++))
done
- print_screen_output "$ip_data$interfaces"
- # then wrap it if needed
- if [[ -n $interfaces_2 ]];then
- interfaces_2=$( create_print_line " " "$interfaces_2" )
- print_screen_output "$interfaces_2"
+
+ # then print out anything not printed already
+ if [[ -n $if_string ]];then
+ full_string=$( create_print_line " " "$if_string" )
+ print_screen_output "$full_string"
+ fi
+ eval $LOGFE
+}
+
+print_optical_drive_data()
+{
+ eval $LOGFS
+ local a_drives='' drive_data='' counter=''
+ local drive_id='' drive_links='' vendor='' speed='' multisession='' mcn='' audio=''
+ local dvd='' state='' rw_support='' rev='' separator='' drive_string=''
+ get_optical_drive_data
+ # 0 - true dev path, ie, sr0, hdc
+ # 1 - dev links to true path
+ # 2 - device vendor - for hdx drives, vendor model are one string from proc
+ # 3 - device model
+ # 4 - device rev version
+ if [[ ${#A_OPTICAL_DRIVE_DATA[@]} -gt 0 ]];then
+ for (( i=0; i < ${#A_OPTICAL_DRIVE_DATA[@]}; i++ ))
+ do
+ IFS=","
+ a_drives=(${A_OPTICAL_DRIVE_DATA[i]})
+ IFS="$ORIGINAL_IFS"
+ audio=''
+ drive_data=''
+ drive_id=''
+ drive_links=''
+ dvd=''
+ mcn=''
+ multisession=''
+ rev=''
+ rw_support=''
+ separator=''
+ speed=''
+ state=''
+ vendor=''
+ if [[ ${#A_OPTICAL_DRIVE_DATA[@]} -eq 1 && -z ${a_drives[0]} && -z ${a_drives[1]} ]];then
+ drive_string="No optical drives detected."
+ B_SHOW_FULL_OPTICAL='false'
+ else
+ if [[ ${#A_OPTICAL_DRIVE_DATA[@]} -gt 1 ]];then
+ counter="-$(( i + 1 ))"
+ fi
+ if [[ -z ${a_drives[0]} ]];then
+ drive_id='N/A'
+ else
+ drive_id="/dev/${a_drives[0]}"
+ fi
+ drive_links=$( sed 's/~/,/g' <<< ${a_drives[1]} )
+ if [[ -z $drive_links ]];then
+ drive_links='N/A'
+ fi
+ if [[ -n ${a_drives[2]} ]];then
+ vendor=${a_drives[2]}
+ if [[ -n ${a_drives[3]} ]];then
+ vendor="$vendor ${a_drives[3]}"
+ fi
+ fi
+ if [[ -z $vendor ]];then
+ if [[ -n ${a_drives[3]} ]];then
+ vendor=${a_drives[3]}
+ else
+ vendor='N/A'
+ fi
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ if [[ -n ${a_drives[4]} ]];then
+ rev=${a_drives[4]}
+ else
+ rev='N/A'
+ fi
+ rev=" ${C1}rev$SEP3${C2} $rev"
+ fi
+ drive_string="$drive_id ${C1}model$SEP3${C2} $vendor$rev ${C1}dev-links$SEP3${C2} $drive_links"
+ fi
+ drive_data="${C1}Optical${counter}:${C2} $drive_string"
+ drive_data=$( create_print_line "$Line_Starter" "$drive_data" )
+ print_screen_output "$drive_data"
+ Line_Starter=' '
+ # 5 - speed
+ # 6 - multisession support
+ # 7 - MCN support
+ # 8 - audio read
+ # 9 - cdr
+ # 10 - cdrw
+ # 11 - dvd read
+ # 12 - dvdr
+ # 13 - dvdram
+ # 14 - state
+ if [[ $B_SHOW_FULL_OPTICAL == 'true' ]];then
+ if [[ -z ${a_drives[5]} ]];then
+ speed='N/A'
+ else
+ speed="${a_drives[5]}x"
+ fi
+ if [[ -z ${a_drives[8]} ]];then
+ audio='N/A'
+ elif [[ ${a_drives[8]} == 1 ]];then
+ audio='yes'
+ else
+ audio='no'
+ fi
+ audio=" ${C1}audio$SEP3${C2} $audio"
+ if [[ -z ${a_drives[6]} ]];then
+ multisession='N/A'
+ elif [[ ${a_drives[6]} == 1 ]];then
+ multisession='yes'
+ else
+ multisession='no'
+ fi
+ multisession=" ${C1}multisession$SEP3${C2} $multisession"
+ if [[ -z ${a_drives[11]} ]];then
+ dvd='N/A'
+ elif [[ ${a_drives[11]} == 1 ]];then
+ dvd='yes'
+ else
+ dvd='no'
+ fi
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ if [[ -z ${a_drives[14]} ]];then
+ state='N/A'
+ else
+ state="${a_drives[14]}"
+ fi
+ state=" ${C1}state$SEP3${C2} $state"
+ fi
+ if [[ -n ${a_drives[9]} && ${a_drives[9]} == 1 ]];then
+ rw_support='cd-r'
+ separator=','
+ fi
+ if [[ -n ${a_drives[10]} && ${a_drives[10]} == 1 ]];then
+ rw_support="${rw_support}${separator}cd-rw"
+ separator=','
+ fi
+ if [[ -n ${a_drives[12]} && ${a_drives[12]} == 1 ]];then
+ rw_support="${rw_support}${separator}dvd-r"
+ separator=','
+ fi
+ if [[ -n ${a_drives[13]} && ${a_drives[13]} == 1 ]];then
+ rw_support="${rw_support}${separator}dvd-ram"
+ separator=','
+ fi
+ if [[ -z $rw_support ]];then
+ rw_support='none'
+ fi
+
+ drive_data="${C1}Features: speed$SEP3${C2} $speed$multisession$audio ${C1}dvd$SEP3${C2} $dvd ${C1}rw$SEP3${C2} $rw_support$state"
+ drive_data=$( create_print_line "$Line_Starter" "$drive_data" )
+ print_screen_output "$drive_data"
+ fi
+ done
+ else
+ :
fi
eval $LOGFE
}
{
eval $LOGFS
local a_partition_working='' partition_used='' partition_data=''
- local counter=0 line_max=160 i=0 a_partition_data='' line_starter=''
+ local counter=0 i=0 a_partition_data='' line_starter='' line_max=$(( $LINE_MAX - 35 ))
local partitionIdClean='' part_dev='' full_dev='' part_label='' full_label=''
- local part_uuid='' full_uuid='' dev_remote='' full_fs=''
-
- # this handles the different, shorter, irc colors strings embedded in variable data
- if [[ $B_RUNNING_IN_SHELL != 'true' ]];then
- line_max=130
- fi
- # and no color string data at all
- if [[ $SCHEME -eq 0 ]];then
- line_max=75
- fi
- if [[ $B_SHOW_LABELS == 'true' || $B_SHOW_UUIDS == 'true' ]];then
- line_max=20
- fi
+ local part_uuid='' full_uuid='' dev_remote='' full_fs='' line_max_label_uuid=$(( $LINE_MAX - 10 ))
# set A_PARTITION_DATA
get_partition_data
if [[ $B_SHOW_PARTITIONS_FULL == 'true' ]] || [[ ${a_partition_working[4]} == 'main' ]];then
if [[ -n ${a_partition_working[2]} ]];then
- partition_used=" ${C1}used:${C2} ${a_partition_working[2]} (${a_partition_working[3]})"
+ partition_used="${C1}used$SEP3${C2} ${a_partition_working[2]} (${a_partition_working[3]}) "
else
partition_used='' # reset partition used to null
fi
else
full_fs='N/A' # reset partition used to null
fi
- full_fs=" ${C1}fs:${C2} $full_fs"
+ full_fs="${C1}fs$SEP3${C2} $full_fs "
- # don't show user names in output
if [[ $B_SHOW_LABELS == 'true' || $B_SHOW_UUIDS == 'true' ]];then
if [[ -n ${a_partition_working[6]} ]];then
if [[ -z $( grep -E '(^//|:/)' <<< ${a_partition_working[6]} ) ]];then
dev_remote='dev'
part_dev='N/A'
fi
- full_dev=" ${C1}$dev_remote:${C2} $part_dev"
+ full_dev="${C1}$dev_remote$SEP3${C2} $part_dev "
if [[ $B_SHOW_LABELS == 'true' && $dev_remote != 'remote' ]];then
if [[ -n ${a_partition_working[7]} ]];then
part_label="${a_partition_working[7]}"
else
part_label='N/A'
fi
- full_label=" ${C1}label:${C2} $part_label"
+ full_label="${C1}label$SEP3${C2} $part_label "
fi
if [[ $B_SHOW_UUIDS == 'true' && $dev_remote != 'remote' ]];then
if [[ -n ${a_partition_working[8]} ]];then
else
part_uuid='N/A'
fi
- full_uuid=" ${C1}uuid:${C2} $part_uuid"
+ full_uuid="${C1}uuid$SEP3${C2} $part_uuid"
fi
fi
- partitionIdClean=$( sed -r 's|/home/(.*)/(.*)|/home/##/\2|' <<< ${a_partition_working[0]} )
+ # don't show user names in output
+ if [[ $B_OUTPUT_FILTER == 'true' ]];then
+ partitionIdClean=$( sed -r "s|/home/([^/]+)/(.*)|/home/$FILTER_STRING/\2|" <<< ${a_partition_working[0]} )
+ else
+ partitionIdClean=${a_partition_working[0]}
+ fi
+ id_size_fs="${C1}ID:${C2} $partitionIdClean ${C1}size$SEP3${C2} ${a_partition_working[1]} $partition_used$full_fs$full_dev"
+ label_uuid="$full_label$full_uuid"
+ # label/uuid always print one per line, so only wrap if it's very long
+ if [[ $B_SHOW_UUIDS == 'true' && $B_SHOW_LABELS == 'true' && $( calculate_line_length "$id_size_fs$label_uuid" ) -gt $line_max_label_uuid ]];then
+ a_partition_data[$counter]="$id_size_fs"
+ ((counter++))
+ a_partition_data[$counter]="$label_uuid"
+ else
+ a_partition_data[$counter]="${a_partition_data[$counter]}$id_size_fs$label_uuid"
+ fi
# because these lines can vary widely, using dynamic length handling here
- a_partition_data[$counter]="${a_partition_data[$counter]}${C1}ID:${C2}$partitionIdClean ${C1}size:${C2} ${a_partition_working[1]}$partition_used$full_fs$full_dev$full_label$full_uuid "
-
- if [[ $( wc -c <<< ${a_partition_data[$counter]} ) -gt $line_max ]];then
+ if [[ $B_SHOW_LABELS == 'true' || $B_SHOW_UUIDS == 'true' ]] || [[ $( calculate_line_length "${a_partition_data[$counter]}" ) -gt $line_max ]];then
((counter++))
fi
fi
# handle the converted app names, with ~..~ means it didn't have a path
if [[ -n $( grep -E '^~.*~$' <<< ${a_ps_data[0]} ) ]];then
- app_daemon='daemon:'
+ app_daemon='daemon'
else
- app_daemon='command:'
+ app_daemon='command'
fi
- app_name=" ${C1}$app_daemon${C2} ${a_ps_data[0]}"
+ app_name=" ${C1}$app_daemon$SEP3${C2} ${a_ps_data[0]}"
if [[ ${a_ps_data[0]} != ${a_ps_data[2]} ]];then
- app_name="$app_name ${C1}(started by:${C2} ${a_ps_data[2]}${C1})${C2}"
+ app_name="$app_name ${C1}(started by$SEP3${C2} ${a_ps_data[2]}${C1})${C2}"
fi
- app_pid=" ${C1}pid:${C2} ${a_ps_data[6]}"
+ app_pid=" ${C1}pid$SEP3${C2} ${a_ps_data[6]}"
# ${C1}user:${C2} ${a_ps_data[8]}
case $1 in
cpu)
- app_cpu=" ${C1}cpu:${C2} ${a_ps_data[4]}%"
+ app_cpu=" ${C1}cpu$SEP3${C2} ${a_ps_data[4]}%"
if [[ $B_EXTRA_DATA == 'true' ]];then
- extra_data=" ${C1}mem:${C2} ${a_ps_data[7]}MB (${a_ps_data[5]}%)${C2}"
+ extra_data=" ${C1}mem$SEP3${C2} ${a_ps_data[7]}MB (${a_ps_data[5]}%)${C2}"
fi
;;
mem)
- app_mem=" ${C1}mem:${C2} ${a_ps_data[7]}MB (${a_ps_data[5]}%)${C2}"
+ app_mem=" ${C1}mem$SEP3${C2} ${a_ps_data[7]}MB (${a_ps_data[5]}%)${C2}"
if [[ $B_EXTRA_DATA == 'true' ]];then
- extra_data=" ${C1}cpu:${C2} ${a_ps_data[4]}%"
+ extra_data=" ${C1}cpu$SEP3${C2} ${a_ps_data[4]}%"
fi
;;
esac
(( line_counter++ ))
- count_nu="${C1}$line_counter -${C2}"
+ count_nu="${C1}$line_counter:${C2}"
full_line="$count_nu$app_cpu$app_mem$app_name$app_pid$extra_data"
ps_data=$( create_print_line " " "$full_line" )
print_screen_output "$ps_data"
eval $LOGFE
}
+print_script_version()
+{
+ local script_patch_number=$( get_patch_version_string )
+ local script_version="${C1}$SCRIPT_NAME$SEP3${C2} $SCRIPT_VERSION_NUMBER$script_patch_number${CN}"
+ # great trick from: http://ideatrash.net/2011/01/bash-string-padding-with-sed.html
+ # left pad: sed -e :a -e 's/^.\{1,80\}$/& /;ta'
+ # right pad: sed -e :a -e 's/^.\{1,80\}$/ &/;ta'
+ # center pad: sed -e :a -e 's/^.\{1,80\}$/ & /;ta'
+ #local line_max=$(( $LINE_MAX - 10 ))
+ #script_version="$( sed -e :a -e "s/^.\{1,$line_max\}$/ &/;ta" <<< $script_version )" # use to create padding if needed
+ # script_version=$( create_print_line "Version:" "$script_version" )
+ print_screen_output "$script_version"
+}
+
print_sensors_data()
{
eval $LOGFS
local mobo_temp='' cpu_temp='' psu_temp='' cpu_fan='' mobo_fan='' ps_fan='' sys_fans='' sys_fans2=''
local temp_data='' fan_data='' fan_data2='' b_is_error='false' fan_count=0 gpu_temp=''
local a_sensors_working=''
+ local Sensors_Data="$( get_sensors_output )"
get_sensors_data
IFS=","
else
cpu_temp='N/A'
fi
- cpu_temp="${C1}System Temperatures: cpu:${C2} $cpu_temp "
+ cpu_temp="${C1}System Temperatures: cpu$SEP3${C2} $cpu_temp "
if [[ -n ${a_sensors_working[1]} ]];then
mobo_temp=${a_sensors_working[1]}
else
mobo_temp='N/A'
fi
- mobo_temp="${C1}mobo:${C2} $mobo_temp "
+ mobo_temp="${C1}mobo$SEP3${C2} $mobo_temp "
if [[ -n ${a_sensors_working[2]} ]];then
- psu_temp="${C1}psu:${C2} ${a_sensors_working[2]} "
+ psu_temp="${C1}psu$SEP3${C2} ${a_sensors_working[2]} "
fi
gpu_temp=$( get_gpu_temp_data )
# dump the unneeded screen data for single gpu systems
gpu_temp=$( cut -d ':' -f 2 <<< $gpu_temp )
fi
if [[ -n $gpu_temp ]];then
- gpu_temp="${C1}gpu:${C2} ${gpu_temp} "
+ gpu_temp="${C1}gpu$SEP3${C2} ${gpu_temp} "
fi
;;
# then the fan data from main fan array
else
cpu_fan='N/A'
fi
- cpu_fan="${C1}Fan Speeds (in rpm): cpu:${C2} $cpu_fan "
+ cpu_fan="${C1}Fan Speeds (in rpm): cpu$SEP3${C2} $cpu_fan "
(( fan_count++ ))
;;
1)
if [[ -n ${a_sensors_working[1]} ]];then
- mobo_fan="${C1}mobo:${C2} ${a_sensors_working[1]} "
+ mobo_fan="${C1}mobo$SEP3${C2} ${a_sensors_working[1]} "
(( fan_count++ ))
fi
;;
2)
if [[ -n ${a_sensors_working[2]} ]];then
- ps_fan="${C1}psu:${C2} ${a_sensors_working[2]} "
+ ps_fan="${C1}psu$SEP3${C2} ${a_sensors_working[2]} "
(( fan_count++ ))
fi
;;
fan_number=$(( $j - 2 )) # sys fans start on array key 5
# wrap after fan 6 total
if [[ $fan_count -lt 7 ]];then
- sys_fans="$sys_fans${C1}sys-$fan_number:${C2} ${a_sensors_working[$j]} "
+ sys_fans="$sys_fans${C1}sys-$fan_number$SEP3${C2} ${a_sensors_working[$j]} "
else
- sys_fans2="$sys_fans2${C1}sys-$fan_number:${C2} ${a_sensors_working[$j]} "
+ sys_fans2="$sys_fans2${C1}sys-$fan_number$SEP3${C2} ${a_sensors_working[$j]} "
fi
(( fan_count++ ))
fi
fan_number=$(( $j + 1 )) # sys fans start on array key 5
# wrap after fan 6 total
if [[ $fan_count -lt 7 ]];then
- sys_fans="$sys_fans${C1}fan-$fan_number:${C2} ${a_sensors_working[$j]} "
+ sys_fans="$sys_fans${C1}fan-$fan_number$SEP3${C2} ${a_sensors_working[$j]} "
else
- sys_fans2="$sys_fans2${C1}fan-$fan_number:${C2} ${a_sensors_working[$j]} "
+ sys_fans2="$sys_fans2${C1}fan-$fan_number$SEP3${C2} ${a_sensors_working[$j]} "
fi
(( fan_count++ ))
fi
print_system_data()
{
eval $LOGFS
- local system_data='' bits=''
- local host_name=$( hostname )
+ local system_data='' bits='' desktop_environment=''
+ local host_kernel_string='' de_distro_string='' host_string='' desktop_type='Desktop'
+ local host_name=$HOSTNAME
local current_kernel=$( uname -rm ) # | gawk '{print $1,$3,$(NF-1)}' )
local distro="$( get_distro_data )"
- # check for 64 bit first
+ local tty_session=$( basename "$( tty 2>/dev/null )" | sed 's/[^0-9]*//g' )
+
+ # I think these will work, maybe, if logged in as root and in X
+ if [[ $B_RUNNING_IN_X == 'true' ]];then
+ desktop_environment=$( get_desktop_environment )
+ if [[ -z $desktop_environment ]];then
+ desktop_environment='N/A'
+ fi
+ else
+ if [[ -z $tty_session && $B_CONSOLE_IRC == 'true' ]];then
+ tty_session=$( get_console_irc_tty )
+ fi
+ if [[ -n $tty_session ]];then
+ tty_session=" $tty_session"
+ fi
+ desktop_environment="tty$tty_session"
+ desktop_type='Console'
+ fi
+ de_distro_string="${C1}$desktop_type$SEP3${C2} $desktop_environment ${C1}Distro$SEP3${C2} $distro"
+ if [[ $B_EXTRA_DATA == 'true' ]];then
+ gcc_string=$( get_gcc_kernel_version )
+ if [[ -n $gcc_string ]];then
+ gcc_string=", ${C1}gcc$SEP3${C2} $gcc_string"
+ fi
+ fi
+ # check for 64 bit first
if [[ -n $( uname -m | grep -o 'x86_64' ) ]];then
- bits="(64 bit)"
+ bits="64"
else
- bits="(32 bit)"
+ bits="32"
fi
-
+ bits=" (${bits} bit${gcc_string})"
if [[ $B_SHOW_HOST == 'true' ]];then
- system_data=$( create_print_line "System:" "${C1}Host${C2} $host_name ${C1}Kernel${C2}" )
+ if [[ -z $HOSTNAME ]];then
+ if [[ -n $( type p hostname ) ]];then
+ host_name=$( hostname )
+ fi
+ if [[ -z $host_name ]];then
+ host_name='N/A'
+ fi
+ fi
+ host_string="${C1}Host$SEP3${C2} $host_name "
+ system_data=$( create_print_line "System:" "$host_string$host_name ${C1}Kernel$SEP3${C2}" )
+ fi
+ host_kernel_string="$host_string${C1}Kernel$SEP3${C2} $current_kernel$bits "
+ if [[ $( calculate_line_length "$host_kernel_string$de_distro_string" ) -lt $LINE_MAX ]];then
+ system_data="$host_kernel_string$de_distro_string"
+ system_data=$( create_print_line "System:" "$system_data" )
else
- system_data=$( create_print_line "System:" "${C1}Kernel${C2}" )
+ system_data=$( create_print_line "System:" "$host_kernel_string" )
+ print_screen_output "$system_data"
+ system_data=$( create_print_line " " "$de_distro_string" )
fi
- system_data="$system_data $current_kernel $bits ${C1}Distro${C2} $distro"
print_screen_output "$system_data"
eval $LOGFE
}
else
full_size=${a_unmounted_data[1]}
fi
- full_size="${C1}size:${C2} $full_size"
+ full_size="${C1}size$SEP3${C2} $full_size"
if [[ -z ${a_unmounted_data[2]} ]];then
full_label='N/A'
else
full_label=${a_unmounted_data[2]}
fi
- full_label="${C1}label:${C2} $full_label"
+ full_label="${C1}label$SEP3${C2} $full_label"
if [[ -z ${a_unmounted_data[3]} ]];then
full_uuid='N/A'
else
full_uuid=${a_unmounted_data[3]}
fi
- full_uuid="${C1}uuid:${C2} $full_uuid"
+ full_uuid="${C1}uuid$SEP3${C2} $full_uuid"
if [[ -z ${a_unmounted_data[4]} ]];then
full_fs=''
else
- full_fs="${C1}fs:${C2} ${a_unmounted_data[4]}"
+ full_fs="${C1}fs$SEP3${C2} ${a_unmounted_data[4]}"
fi
full_string="$full_dev $full_size $full_label $full_uuid $full_fs"
if [[ $i -eq 0 ]];then