# This is the cmake-based build system for Quassel IRC.
+#
# You may pass various options to cmake:
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
# : select binaries to build
# -DWITH_OPENSSL=OFF : Disable OpenSSL support
-# -DWITH_DBUS=OFF : Disable D-Bus support
+# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
+# -DWITH_KDE=ON : Enable KDE4 support
+#
+# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
+#
# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DSPUTDEV=ON : Do not use.
-# -DDEPLOY=ON : Mac OS X only. Use only fore redistribution Quassel Packages!!
+# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
#
-# NOTE: You need to remove CMakeCache.txt if you plan to change any of these values!
+# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
project(QuasselIRC)
-# Target scopes don't work in older versions
-cmake_minimum_required(VERSION 2.4.7 FATAL_ERROR)
+cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR)
if(COMMAND cmake_policy)
cmake_policy(SET CMP0003 NEW)
endif(COMMAND cmake_policy)
-# Use our own (well, KDE's) version of some modules
-# In particular cmake's FindQt4 and FindOpenSSL are quite buggy
+# Use our own (well, and KDE's) version of some modules
+# In particular cmake's own FindQt4 and FindOpenSSL are quite buggy
set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+include(QuasselMacros)
# Various options and variables that can be set on the command line
option(WANT_CORE "Build the core (server) binary" ON)
option(WANT_QTCLIENT "Build the Qt4 GUI client binary" ON)
-option(WANT_MONO "Build the monolithic (all-in-one) binary" OFF)
+option(WANT_MONO "Build the monolithic (all-in-one) binary" ON)
option(WITH_OPENSSL "Enable OpenSSL support if present on the system" ON)
option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
+option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
+option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
+option(WITH_KDE "Enable KDE4 integration" OFF)
+
+# We use icon paths from KDE 4.3 trunk, which are partially invalid on older and possibly
+# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
+# run on a matching KDE version only.
+option(WITH_OXYGEN "Install Oxygen icons. Heavily recommended unless you use KDE 4.3" ON)
option(STATIC "Enable static building (might not be portable)" OFF)
-option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
-option(SPUTDEV "Do not use!" OFF)
-set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt")
-set(LINGUAS "" CACHE STRING "Space-separated List of locales specifying languages that should be compiled")
+if(APPLE)
+ option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+endif(APPLE)
+
+# Default to embedding data in the static case
+if(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON)
+else(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON) # should be OFF as soon as everything works
+endif(STATIC OR WIN32)
+option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
+
+set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
+set(LINGUAS "" CACHE STRING "Comma-separated list of locales specifying languages that should be compiled")
+
+# Some settings imply others
if(STATIC)
- set(CMAKE_BUILD_TYPE Release)
+ set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
endif(STATIC)
-# RPATH needs to be set correctly
-set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
-set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
+if(WIN32)
+ # We don't support separately installed resources yet on Win32
+ set(EMBED_DATA ON)
+endif(WIN32)
+
+# Build Type
+# We need to make sure it's not empty
+# Supported: Release, RelWithDebugInfo, Debug, Debugfull
+
+# On WIN32, only Release seems to work correctly (?)
+if(WIN32)
+ set(DEFAULT_BUILD_TYPE "Release")
+else(WIN32)
+ set(DEFAULT_BUILD_TYPE "RelWithDebugInfo")
+endif(WIN32)
+
+set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type")
+if(NOT CMAKE_BUILD_TYPE)
+ set(CMAKE_BUILD_TYPE ${DEFAULT_BUILD_TYPE} CACHE STRING "CMake Build Type" FORCE)
+endif(NOT CMAKE_BUILD_TYPE)
# Enable various flags on gcc
if(CMAKE_COMPILER_IS_GNUCXX)
- include(CheckCXXCompilerFlag)
- check_cxx_compiler_flag(-Wall HAVE_WALL)
- if(HAVE_WALL)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
- endif(HAVE_WALL)
- check_cxx_compiler_flag(-Wextra HAVE_WEXTRA)
- if(HAVE_WEXTRA)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wextra")
- endif(HAVE_WEXTRA)
- check_cxx_compiler_flag(-ansi HAVE_ANSI)
- if(HAVE_ANSI)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi")
- endif(HAVE_ANSI)
+ # Let's just hope that all gccs support these options and skip the tests...
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor")
+ set(CMAKE_CXX_FLAGS_RELWITHDEBUGINFO "-O2")
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -fno-reorder-blocks -fno-schedule-insns -fno-inline")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3")
endif(CMAKE_COMPILER_IS_GNUCXX)
set(QT_MIN_VERSION "4.4.0")
add_definitions(-DMAC_10_4_SDK)
endif(APPLE AND DEPLOY)
-# Enable mostly b0rked stuff (new ChatView), do not enable this unless you know what you do...
-if(SPUTDEV)
- add_definitions(-DSPUTDEV)
-endif(SPUTDEV)
-
-# Set up execinfo
-
-# The problem with this library is that it is built-in in the Linux glib,
-# while on systems like FreeBSD, it is installed separately and thus needs to be linked to.
-# Therefore, we search for the header to see if the it's available in the first place.
-# If it is available, we try to locate the library to figure out whether it is built-in or not.
-
-find_path(EXECINFO_H_DIR "execinfo.h")
-
-if(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
- # We found the header file's include dir.
- # Let's add it so the compiler finds it as well.
- include_directories(${EXECINFO_H_DIR})
-
- # Now determine if it's built-in or not, by searching the library file.
- find_library(EXECINFO_LIB_PATH "execinfo")
-
- if(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
- # Built-in, no further action is needed
- message(STATUS "Found execinfo")
- else(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
- # It's an external library, link it.
- link_libraries(${EXECINFO_LIB_PATH})
- message(STATUS "Found execinfo: ${EXECINFO_LIB_PATH}")
- endif(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
-
- set(HAVE_EXECINFO true)
-
-endif(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
-
-if(HAVE_EXECINFO)
+# Execinfo is needed for generating backtraces
+find_package(ExecInfo)
+if(EXECINFO_FOUND)
add_definitions(-DHAVE_EXECINFO)
-endif(HAVE_EXECINFO)
-
+ include_directories(${EXECINFO_INCLUDES})
+ link_libraries(${EXECINFO_LIBRARIES})
+endif(EXECINFO_FOUND)
# Select a Qt installation here, if you don't want to use system Qt
if(QT)
message(STATUS "Found OpenSSL support in Qt")
add_definitions(-DHAVE_SSL)
set(HAVE_SSL true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_SSL)
else(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
message(STATUS "No OpenSSL support found in Qt, disabling")
endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
add_definitions(-DHAVE_DBUS)
set(LINK_DBUS DBUS)
set(HAVE_DBUS true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_DBUS)
else(QT_QTDBUS_FOUND)
message(STATUS "QtDBus not found, disabling D-Bus support")
endif(QT_QTDBUS_FOUND)
message(STATUS "Disabling D-Bus support")
endif(WITH_DBUS)
-# We need to create a version.gen
-# For this, we create our genversion binary and make sure it is run every time.
-add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
+# Setup QtWebKit support
+if(WITH_WEBKIT)
+ if(QT_QTWEBKIT_FOUND)
+ message(STATUS "Found QtWebKit, enabling WebKit support")
+ add_definitions(-DHAVE_WEBKIT)
+ set(LINK_WEBKIT WEBKIT)
+ set(HAVE_WEBKIT true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_WEBKIT)
+ else(QT_QTWEBKIT_FOUND)
+ message(STATUS "QtWebKit not found, disabling WebKit support")
+ endif(QT_QTWEBKIT_FOUND)
+else(WITH_WEBKIT)
+ message(STATUS "Disabling WebKit support")
+endif(WITH_WEBKIT)
+
+# Setup KDE4 support
+if(WITH_KDE)
+ find_package(KDE4)
+ if(KDE4_FOUND)
+ message(STATUS "Enabling KDE4 integration")
+ include_directories(${KDE4_INCLUDES})
+ add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+ set(HAVE_KDE 1)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_KDE)
+ set(QUASSEL_KDE_LIBRARIES ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} knotifyconfig)
+ # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+ set(EMBED_DATA OFF)
+ else(KDE4_FOUND)
+ message(STATUS "KDE4 not found, disabling KDE integration")
+ endif(KDE4_FOUND)
+else(WITH_KDE)
+ message(STATUS "Disabling KDE4 integration")
+endif(WITH_KDE)
+
+# Setup Phonon support - we only need this if we don't have or want KDE4
+if(NOT HAVE_KDE)
+ if(WITH_PHONON)
+ find_package(Phonon)
+ if(PHONON_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ set(HAVE_PHONON true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_PHONON)
+ else(PHONON_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(PHONON_FOUND)
+ else(WITH_PHONON)
+ message(STATUS "Disabling Phonon support")
+ endif(WITH_PHONON)
+endif(NOT HAVE_KDE)
+
+# Now set up install locations; those are set by KDE if integration is enabled
+if(NOT HAVE_KDE)
+ if(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
+ else(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
+ endif(WIN32)
+endif(NOT HAVE_KDE)
-add_custom_target(genversion_run ALL ${CMAKE_BINARY_DIR}/genversion
- ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/common/version.gen)
-add_dependencies(genversion_run genversion)
-
-# Add needed subdirs
-add_subdirectory(src/common)
-include_directories(src/common)
-if(WANT_CORE OR WANT_MONO)
- add_subdirectory(src/core)
- include_directories(src/core)
-endif(WANT_CORE OR WANT_MONO)
-if(WANT_QTCLIENT OR WANT_MONO)
- add_subdirectory(src/client)
- add_subdirectory(src/uisupport)
- add_subdirectory(src/qtui)
- include_directories(src/client)
- include_directories(src/uisupport)
- include_directories(src/qtui)
-endif(WANT_QTCLIENT OR WANT_MONO)
-
-# Make sure version.gen exists before building mod_common
-add_dependencies(mod_common genversion_run)
-
-# Generate binary translation files
-include(QuasselGenerateTranslations)
-quassel_generate_i18n_resource(RC_I18N ${LINGUAS})
-
-# Add resources
-qt4_add_resources(RC_ICONS src/icons/icons.qrc)
-qt4_add_resources(RC_QUASSEL_ICONS src/icons/quassel-icons.qrc)
-qt4_add_resources(RC_SQL src/core/sql.qrc)
+# RPATH needs to be set correctly
+# Do this down here, since otherwise KDE wants to handle it itself, and fails
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
# Set global buildflags
-# This is very much non-portable, so don't use -DSTATICGCC until you know what
+# This is very much non-portable, so don't use -DSTATIC until you know what
# you do.
if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
endif(HAVE_SSL)
endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
-if(STATIC AND WIN32)
- link_libraries(imm32 winmm) # missing by default :/
- if(HAVE_SSL)
+if(WIN32)
+ #if(STATIC)
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+ #endif(STATIC)
+ if(HAVE_SSL)
link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(HAVE_SSL)
-endif(STATIC AND WIN32)
+ endif(HAVE_SSL)
+endif(WIN32)
if(WIN32)
- set(WIN32_RC src/icons/win32.rc) # for app icons on windows
+ set(RC_WIN32 ../pics/win32.rc) # for app icons on windows
endif(WIN32)
-# Here comes the dirty part. Our targets need different Qt4 modules, i.e. different libs
-# and defines. We can't simply include UseQt4 several times, since definitions add up.
-# We workaround this by using our own macro to figure out what to add.
-
-# This macro sets variables for additional Qt modules.
-macro(setup_qt4_variables)
- set(QUASSEL_QT_LIBRARIES )
- IF(WIN32)
- set(MAIN MAIN)
- ENDIF(WIN32)
- foreach(qtmod CORE ${ARGV} ${MAIN})
- set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_QT${qtmod}_LIBRARY} ${QT_${qtmod}_LIB_DEPENDENCIES})
- endforeach(qtmod ${ARGV})
- set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_LIBRARIES})
-endmacro(setup_qt4_variables)
-
-# Now we have everything, so just glue the right pieces together :)
-if(WANT_CORE)
- setup_qt4_variables(NETWORK SCRIPT SQL)
- add_executable(quasselcore ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_SQL} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quasselcore PROPERTIES
- COMPILE_FLAGS "-DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_CORE")
- target_link_libraries(quasselcore mod_core mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_CORE)
-
-if(WANT_QTCLIENT)
- setup_qt4_variables(${LINK_DBUS} GUI NETWORK)
- add_executable(quasselclient WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quasselclient PROPERTIES
- COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DBUILD_QTUI")
- target_link_libraries(quasselclient mod_qtui mod_uisupport mod_client mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_QTCLIENT)
-
-if(WANT_MONO)
- setup_qt4_variables(${LINK_DBUS} GUI NETWORK SCRIPT SQL)
- add_executable(quassel WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_SQL} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quassel PROPERTIES
- COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_MONO")
- target_link_libraries(quassel mod_qtui mod_uisupport mod_client mod_core mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_MONO)
-
-# Build bundles for MacOSX
-if(APPLE)
- add_custom_command(TARGET quasselclient POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
- ${CMAKE_SOURCE_DIR} "Quassel Client" quasselclient)
- add_custom_command(TARGET quassel POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
- ${CMAKE_SOURCE_DIR} "Quassel" quassel)
- if(DEPLOY)
- add_custom_command(TARGET quasselclient POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Client)
- add_custom_command(TARGET quasselcore POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Core)
- endif(DEPLOY)
-endif(APPLE)
-
-# Install rules
-if(WANT_CORE)
- install(TARGETS quasselcore
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-endif(WANT_CORE)
-
-if(WANT_QTCLIENT)
- install(TARGETS quasselclient
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-
- install(FILES quasselclient.desktop
- DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_QTCLIENT)
+# We need to create a version.gen
+# For this, we create our genversion binary and make sure it is run every time.
+add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
+target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
-if(WANT_MONO)
- install(TARGETS quassel
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
+get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
+add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}
+ ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/version.gen)
+add_dependencies(genversion_run genversion)
- install(FILES quassel.desktop
- DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_MONO)
+# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
+set(COMMON_DEPS ${RC_WIN32})
+set(CORE_DEPS )
+set(CLIENT_DEPS )
+
+# Add needed subdirs - the order is important, since src needs some vars set by other dirs
+add_subdirectory(data)
+add_subdirectory(icons)
+add_subdirectory(pics)
+add_subdirectory(i18n)
+add_subdirectory(src)