# This is the cmake-based build system for Quassel IRC.
+#
# You may pass various options to cmake:
+#
# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-# : select binaries to build
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DSPUTDEV=ON : Do not use.
-# -DDEPLOY=ON : Mac OS X only. Use only fore redistribution Quassel Packages!!
+# : select binaries to build
+# -DWITH_OPENSSL=OFF : Disable OpenSSL support
+# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
+# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
+# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
+# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
+# -DWITH_KDE=ON : Enable KDE4 support
+# -DWITH_CRYPT=OFF : Disable encryption support
+# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
+# -DWITH_SYSLOG=OFF : Disable syslog support
+#
+# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
+#
+# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON : Enable static building of Quassel. Use with care.
+# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
#
-# NOTE: You need to remove CMakeCache.txt if you plan to change any of these values!
+# -DWITH_QT5=ON : Enable (very) experimental support for Qt5 (see doc/README.Qt5!)
+#
+# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
+
+cmake_minimum_required(VERSION 2.8.9)
project(QuasselIRC)
-# Target scopes don't work in older versions
-cmake_minimum_required(VERSION 2.4.7 FATAL_ERROR)
+# Versions
+set(QUASSEL_MAJOR 0)
+set(QUASSEL_MINOR 11)
+set(QUASSEL_PATCH 0)
+set(QUASSEL_VERSION_STRING "0.11-pre")
-if(COMMAND cmake_policy)
- cmake_policy(SET CMP0003 OLD) # suppress linker warnings
-endif(COMMAND cmake_policy)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCXXCompilerFlag)
-# Use our own (well, KDE's) version of some modules
-# In particular cmake's FindQt4 and FindOpenSSL are quite buggy
+# Use our own (well, and KDE's) version of some modules
+# In particular cmake's own FindQt4 and FindOpenSSL are quite buggy
set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+include(QuasselMacros)
# Various options and variables that can be set on the command line
option(WANT_CORE "Build the core (server) binary" ON)
option(WANT_QTCLIENT "Build the Qt4 GUI client binary" ON)
-option(WANT_MONO "Build the monolithic (all-in-one) binary" OFF)
+option(WANT_MONO "Build the monolithic (all-in-one) binary" ON)
+
+option(WITH_OPENSSL "Enable OpenSSL support if present on the system" ON)
+option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
+option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
+option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
+option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
+option(WITH_KDE "Enable KDE4 integration" OFF)
+option(WITH_CRYPT "Enable encryption support if present on system" ON)
+option(WITH_SYSLOG "Use syslog for storing log data" ON)
+
+# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
+# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
+# run on a matching KDE version only.
+set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
+
+# Enable very experimental support for Qt5. Might break the compilation, or even more!
+option(WITH_QT5 "Enable (very) experimental support for Qt5" OFF)
option(STATIC "Enable static building (might not be portable)" OFF)
-option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
-option(SPUTDEV "Do not use!" OFF)
-set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt")
-set(LINGUAS "" CACHE STRING "Space-separated List of locales specifying languages that should be compiled")
-
+if(APPLE)
+ option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+ # Notification Center is only available in > 10.8, which is Darwin v12
+ if(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
+ option(WITH_NOTIFICATION_CENTER "Enable OS X Notification Center support" ON)
+ endif(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
+endif(APPLE)
+
+# Default to embedding data in the static case
+if(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON)
+else(STATIC OR WIN32)
+ set(EMBED_DEFAULT ON) # should be OFF as soon as everything works
+endif(STATIC OR WIN32)
+
+option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
+
+set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
+
+# Some settings imply others
if(STATIC)
- set(CMAKE_BUILD_TYPE Release)
+ add_definitions(-DSTATIC)
+ set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
endif(STATIC)
+if(WIN32)
+ # We don't support separately installed resources yet on Win32
+ set(EMBED_DATA ON)
+endif(WIN32)
+
+# For static builds, arbitrary extra libs might need to be linked
+# Define a comma-separated list here
+# e.g. for pgsql, we need -DLINK_EXTRA=pq;crypt
+set(LINK_EXTRA "" CACHE STRING "Semicolon-separated list of libraries to be linked")
+if(LINK_EXTRA)
+ string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
+ link_libraries(${LINK_EXTRA})
+endif(LINK_EXTRA)
+
+# Build Types
+
+if(CMAKE_CONFIGURATION_TYPES)
+ set(CMAKE_CONFIGURATION_TYPES Release RelWithDebInfo Debug Debugfull Profile MinSizeRel)
+ set(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING
+ "Reset the configurations to what we need"
+ FORCE)
+endif()
+
+if(NOT CMAKE_BUILD_TYPE)
+ SET(CMAKE_BUILD_TYPE RelWithDebInfo CACHE STRING
+ "Choose the type of build, options are: None Debug Release RelWithDebInfo Debug Debugfull Profile MinSizeRel."
+ FORCE)
+endif()
+
+# Qt debug flags
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUGFULL QT_DEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_PROFILE QT_NO_DEBUG NDEBUG)
+set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL QT_NO_DEBUG NDEBUG)
+
+if(NOT CMAKE_CONFIGURATION_TYPES AND NOT CMAKE_BUILD_TYPE)
+ set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS QT_NO_DEBUG NDEBUG)
+endif()
+
# Enable various flags on gcc
if(CMAKE_COMPILER_IS_GNUCXX)
- include(CheckCXXCompilerFlag)
- check_cxx_compiler_flag(-Wall HAVE_WALL)
- if(HAVE_WALL)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
- endif(HAVE_WALL)
- check_cxx_compiler_flag(-Wextra HAVE_WEXTRA)
- if(HAVE_WEXTRA)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wextra")
- endif(HAVE_WEXTRA)
- check_cxx_compiler_flag(-ansi HAVE_ANSI)
- if(HAVE_ANSI)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi")
- endif(HAVE_ANSI)
+ # Let's just hope that all gccs support these options and skip the tests...
+ # -fno-strict-aliasing is needed apparently for Qt < 4.6
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing")
+# set(CMAKE_CXX_FLAGS_RELEASE "-O2") # use CMake default
+# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-g -O2") # use CMake default
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -ggdb -O2 -fno-reorder-blocks -fno-schedule-insns -fno-inline")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -ggdb -fno-inline")
+ set(CMAKE_CXX_FLAGS_PROFILE "-g3 -ggdb -fno-inline -ftest-coverage -fprofile-arcs")
+
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi -W -Wall -Wextra -Wnon-virtual-dtor -fno-strict-aliasing -Wundef -Wcast-align -Wpointer-arith -Wformat-security -fno-check-new -fno-common")
+
+ check_cxx_compiler_flag(-Woverloaded-virtual CXX_W_OVERLOADED_VIRTUAL)
+ if(CXX_W_OVERLOADED_VIRTUAL)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Woverloaded-virtual")
+ endif()
+
+ # Just for miniz
+ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -Wno-unused-function -Wno-undef -fno-strict-aliasing")
endif(CMAKE_COMPILER_IS_GNUCXX)
-set(QT_MIN_VERSION "4.3.0")
+# ... and for Clang
+if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wnon-virtual-dtor -Wno-long-long -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wextra -Wpointer-arith -Wformat-security -Woverloaded-virtual -fno-common -Werror=return-type")
+# set(CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
+# set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG -DQT_NO_DEBUG") # Use CMake default
+ set(CMAKE_CXX_FLAGS_DEBUG "-g -O2 -fno-inline")
+ set(CMAKE_CXX_FLAGS_DEBUGFULL "-g3 -fno-inline")
+ set(CMAKE_CXX_FLAGS_PROFILE "-g3 -fno-inline -ftest-coverage -fprofile-arcs")
+
+ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -Wno-unused-function -Wno-undef -fno-strict-aliasing")
+endif()
+# Mac build stuff
if(APPLE AND DEPLOY)
- set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.4")
- set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.4u.sdk/")
+ set(CMAKE_OSX_ARCHITECTURES "x86_64")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.6")
+ set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.6.sdk/")
+ add_definitions(-DMAC_10_6_SDK)
endif(APPLE AND DEPLOY)
-# Enable mostly b0rked stuff (new ChatView), do not enable this unless you know what you do...
-if(SPUTDEV)
- add_definitions(-DSPUTDEV)
-endif(SPUTDEV)
-
-# Set up OpenSSL
-find_package(OpenSSL)
-if(NOT OPENSSL_FOUND)
- add_definitions(-DQT_NO_OPENSSL)
-endif(NOT OPENSSL_FOUND)
-
-# Select a Qt installation here, if you don't want to use system Qt
-if(QT)
- # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
- set(ENV{PATH} ${QT}/bin:$ENV{PATH})
-endif(QT)
-
-# Now that we have the correct $PATH, lets find Qt!
-find_package(Qt4 REQUIRED)
-
-set(QT_DONT_USE_QTGUI 1)
-include(${QT_USE_FILE})
-include_directories(${QT_INCLUDES})
-
-# We need to create a version.gen
-# For this, we create our genversion binary and make sure it is run every time.
-add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
-
-add_custom_target(genversion_run ALL ${CMAKE_BINARY_DIR}/genversion
- ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/common/version.gen)
-add_dependencies(genversion_run genversion)
-
-# Add needed subdirs
-add_subdirectory(src/common)
-include_directories(src/common)
-if(WANT_CORE OR WANT_MONO)
- add_subdirectory(src/core)
- include_directories(src/core)
-endif(WANT_CORE OR WANT_MONO)
-if(WANT_QTCLIENT OR WANT_MONO)
- add_subdirectory(src/client)
- add_subdirectory(src/uisupport)
- add_subdirectory(src/qtui)
- include_directories(src/client)
- include_directories(src/uisupport)
- include_directories(src/qtui)
-endif(WANT_QTCLIENT OR WANT_MONO)
-
-# Make sure version.gen exists before building mod_common
-add_dependencies(mod_common genversion_run)
-
-# Generate binary translation files
-include(QuasselGenerateTranslations)
-quassel_generate_i18n_resource(RC_I18N ${LINGUAS})
-
-# Add resources
-qt4_add_resources(RC_ICONS src/icons/icons.qrc)
-qt4_add_resources(RC_QUASSEL_ICONS src/icons/quassel-icons.qrc)
-qt4_add_resources(RC_SQL src/core/sql.qrc)
+# Simplify checks
+if(WANT_MONO OR WANT_QTCLIENT)
+ set(BUILD_GUI true)
+endif(WANT_MONO OR WANT_QTCLIENT)
+if(WANT_MONO OR WANT_CORE)
+ set(BUILD_CORE true)
+endif(WANT_MONO OR WANT_CORE)
+
+
+# Version checks
+################
+
+if(WITH_QT5)
+ set(QT_MIN_VERSION "5.0.0")
+ add_definitions(-DHAVE_QT5)
+
+ # Qt5 needs a new enough cmake...
+ cmake_minimum_required(VERSION 2.8.6 FATAL_ERROR)
+
+ # ... for automoc
+ set(CMAKE_AUTOMOC ON)
+else(WITH_QT5)
+
+ # GUI stuff needs some new features
+ if(BUILD_GUI)
+ set(QT_MIN_VERSION "4.6.0")
+ else(BUILD_GUI)
+ set(QT_MIN_VERSION "4.4.0")
+ endif(BUILD_GUI)
+endif(WITH_QT5)
+
+
+# Dependencies
+##############
+
+if(WITH_QT5)
+ find_package(Qt5Core ${QT_MIN_VERSION} REQUIRED)
+ # We need QtWidgets
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Widgets)
+
+ # Setup the i18n-related variables
+ find_package(Qt5LinguistTools)
+
+else(WITH_QT5)
+ # Select a Qt installation here, if you don't want to use system Qt
+ if(QT)
+ # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
+ set(ENV{PATH} ${QT}/bin:$ENV{PATH})
+ endif(QT)
+
+ # Now that we have the correct $PATH, lets find Qt!
+ find_package(Qt4 ${QT_MIN_VERSION} REQUIRED)
+endif(WITH_QT5)
+
+
+# Neither Qt4 nor Qt5 consider lconvert relevant, so they don't support finding it...
+# Rather than shipping hacked buildsys files, let's just infer the path from lrelease
+if(QT_LRELEASE_EXECUTABLE)
+ get_filename_component(_lrelease_path ${QT_LRELEASE_EXECUTABLE} PATH)
+ if(WITH_QT5)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ else(WITH_QT5)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt4 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ endif(WITH_QT5)
+endif(QT_LRELEASE_EXECUTABLE)
+
+
+# zlib for compression, however we can always fall back to miniz
+find_package(ZLIB)
+if(ZLIB_FOUND)
+ message(STATUS "Using system zlib for compression")
+ add_definitions(-DHAVE_ZLIB)
+ include_directories(${ZLIB_INCLUDE_DIRS})
+ set(COMMON_LIBRARIES ${COMMON_LIBRARIES} ${ZLIB_LIBRARIES})
+else()
+ message(STATUS "zlib NOT found, using bundled miniz for compression")
+ if(${CMAKE_SIZEOF_VOID_P} EQUAL 4)
+ message(STATUS "WARNING: This may be slow on 32 bit systems!")
+ endif()
+endif()
+
+
+# Execinfo is needed for generating backtraces
+find_package(ExecInfo)
+if(EXECINFO_FOUND)
+ add_definitions(-DHAVE_EXECINFO)
+ include_directories(${EXECINFO_INCLUDES})
+ link_libraries(${EXECINFO_LIBRARIES})
+endif(EXECINFO_FOUND)
+
+
+# PkgConfig isn't strictly required.
+# However, some optional deps might not be found if it's not present, so warn!
+find_package(PkgConfig)
+if(NOT PKG_CONFIG_FOUND)
+ message(STATUS "WARNING: PkgConfig not available! Some dependencies for optional features might not be found.")
+ message(STATUS " Affected features might include encryption support, DBus menus and Ayatana notifications.")
+endif(NOT PKG_CONFIG_FOUND)
+
+
+# Setup OpenSSL
+# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
+# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
+# own SSL stuff in this case. Qt should care for adding what it needs itself.
+if(WITH_OPENSSL)
+ if(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "Found OpenSSL support in Qt, enabling SSL")
+ add_definitions(-DHAVE_SSL)
+ set(HAVE_SSL true)
+ else(QT_QCONFIG MATCHES "openssl")
+ message(STATUS "No OpenSSL support found in Qt, disabling SSL")
+ add_definitions(-DQT_NO_OPENSSL)
+ endif(QT_QCONFIG MATCHES "openssl")
+else(WITH_OPENSSL)
+ message(STATUS "Not enabling OpenSSL support")
+endif(WITH_OPENSSL)
+
+
+# Check for GUI specific stuff
+if(BUILD_GUI)
+
+ # Setup D-Bus support
+ if(WITH_DBUS)
+ if(WITH_QT5)
+ find_package(Qt5DBus ${QT_MIN_VERSION})
+ find_package(Qt5DBusTools)
+ endif(WITH_QT5)
+
+ if(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ message(STATUS "Found QtDBus, enabling D-Bus support")
+ add_definitions(-DHAVE_DBUS)
+ set(HAVE_DBUS true)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} DBus)
+
+ # check if we have dbusmenu as well
+ if(NOT WITH_QT5)
+ find_package(DBusMenuQt)
+ if(DBUSMENUQT_FOUND)
+ message(STATUS "Enabling support for exporting the tray menu via D-Bus")
+ add_definitions(-DHAVE_DBUSMENU)
+ include_directories(${DBUSMENUQT_INCLUDE_DIR})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${DBUSMENUQT_LIBRARIES})
+ set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} ${DBUSMENUQT_DEFINITIONS}")
+ else(DBUSMENUQT_FOUND)
+ message(STATUS "Disabling support for exporting the tray menu via D-Bus")
+ endif(DBUSMENUQT_FOUND)
+ endif(NOT WITH_QT5)
+
+ else(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ message(STATUS "QtDBus not found, disabling D-Bus support")
+ endif(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
+ else(WITH_DBUS)
+ message(STATUS "Not enabling D-Bus support")
+ endif(WITH_DBUS)
+
+ # Setup QtWebkit support
+ if(WITH_WEBKIT)
+ if(WITH_QT5)
+ find_package(Qt5Webkit ${QT_MIN_VERSION} QUIET)
+ endif(WITH_QT5)
+ if(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ message(STATUS "Found QtWebKit, enabling WebKit support")
+ add_definitions(-DHAVE_WEBKIT)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Webkit XmlPatterns)
+ set(HAVE_WEBKIT true)
+ else(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ message(STATUS "QtWebkit not found, disabling Webkit support")
+ endif(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
+ else(WITH_WEBKIT)
+ message(STATUS "Not enabling Webkit support")
+ endif(WITH_WEBKIT)
+
+ # Setup KDE4 support
+ if(WITH_KDE AND NOT WITH_QT5)
+ # KDE has overzealous CFLAGS making miniz not compile, so save our old flags
+ set(_cflags ${CMAKE_C_FLAGS})
+ find_package(KDE4)
+ if(KDE4_FOUND)
+ message(STATUS "Enabling KDE4 integration")
+ include_directories(${KDE4_INCLUDES})
+ add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
+ set(HAVE_KDE 1)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} ${KDE4_KNOTIFYCONFIG_LIBRARY})
+ # We always use external icons for KDE4 support, since we use its iconloader rather than our own
+ set(EMBED_DATA OFF)
+ # Restore our old CFLAGS
+ set(CMAKE_C_FLAGS ${_cflags})
+ else(KDE4_FOUND)
+ message(STATUS "KDE4 not found, disabling KDE integration")
+ endif(KDE4_FOUND)
+ else(WITH_KDE AND NOT WITH_QT5)
+ message(STATUS "Not enabling KDE4 integration")
+ endif(WITH_KDE AND NOT WITH_QT5)
+
+ # Setup Phonon support - we only need this if we don't have or want KDE4
+ if(NOT HAVE_KDE)
+ if(WITH_PHONON)
+ if(WITH_QT5)
+ find_package(Qt5phonon)
+ if(Qt5phonon_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ set(HAVE_PHONON true)
+ set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} phonon)
+ else(Qt5phonon_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(Qt5phonon_FOUND)
+ else(WITH_QT5)
+ find_package(Phonon)
+ if(PHONON_FOUND)
+ message(STATUS "Enabling Phonon support")
+ add_definitions(-DHAVE_PHONON)
+ include_directories(${PHONON_INCLUDES})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${PHONON_LIBS})
+ set(HAVE_PHONON true)
+ else(PHONON_FOUND)
+ message(STATUS "Phonon not found, disabling audio notifications")
+ endif(PHONON_FOUND)
+ endif(WITH_QT5)
+ else(WITH_PHONON)
+ message(STATUS "Not enabling Phonon support")
+ endif(WITH_PHONON)
+
+ find_package(Libsnore)
+ if(LIBSNORE_FOUND)
+ add_definitions(-DHAVE_LIBSNORE)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${LIBSNORE_LIBRARIES})
+ set(HAVE_SNORENOTIFY true)
+ endif(LIBSNORE_FOUND)
+ endif(NOT HAVE_KDE)
+
+ # Setup libindicate-qt support
+ if(WITH_LIBINDICATE AND NOT WITH_QT5)
+ pkg_check_modules(INDICATEQT QUIET indicate-qt>=0.2.1)
+ if(INDICATEQT_FOUND)
+ message(STATUS "Enabling Ayatana notification support")
+ set(HAVE_INDICATEQT true)
+ add_definitions(-DHAVE_INDICATEQT)
+ link_directories(${INDICATEQT_LIBRARY_DIRS})
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${INDICATEQT_LIBRARIES})
+ else(INDICATEQT_FOUND)
+ message(STATUS "Disabling Ayatana notification support")
+ endif(INDICATEQT_FOUND)
+ else(WITH_LIBINDICATE AND NOT WITH_QT5)
+ message(STATUS "Not enabling Ayatana notification support")
+ # We don't want to link against it even if another package has found it
+ set(INDICATEQT_LIBRARIES "")
+ endif(WITH_LIBINDICATE AND NOT WITH_QT5)
+
+ # Setup OS X notification center support
+ if(WITH_NOTIFICATION_CENTER AND APPLE)
+ set(HAVE_NOTIFICATION_CENTER true)
+ add_definitions(-DHAVE_NOTIFICATION_CENTER)
+ set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES}
+ /System/Library/Frameworks/Foundation.framework
+ )
+ endif()
+endif(BUILD_GUI)
+
+# Core-only deps
+if(BUILD_CORE)
+
+ # Setup encryption support
+ if(WITH_CRYPT AND NOT WITH_QT5)
+ find_package(QCA2)
+ if(QCA2_FOUND)
+ message(STATUS "Enabling encryption support")
+ add_definitions(-DHAVE_QCA2)
+ set(LINK_QCA2 QCA2)
+ set(HAVE_QCA2 true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_QCA2)
+ else(QCA2_FOUND)
+ message(STATUS "Disabling encryption support")
+ endif(QCA2_FOUND)
+ else(WITH_CRYPT AND NOT WITH_QT5)
+ message(STATUS "Not enabling encryption support")
+ endif(WITH_CRYPT AND NOT WITH_QT5)
+
+ # Setup syslog support
+ if(WITH_SYSLOG)
+ check_include_file(syslog.h HAVE_SYSLOG_H)
+ if(HAVE_SYSLOG_H)
+ message(STATUS "Enabling syslog support")
+ set(HAVE_SYSLOG true)
+ add_definitions(-DHAVE_SYSLOG)
+ else(HAVE_SYSLOG_H)
+ message(STATUS "Disabling syslog support")
+ endif(HAVE_SYSLOG_H)
+ else(WITH_SYSLOG)
+ message(STATUS "Not enabling syslog support")
+ endif(WITH_SYSLOG)
+
+endif(BUILD_CORE)
+
+
+# Various settings
+##################
+
+# needed to compile with mingw without kde
+if(MINGW AND NOT HAVE_KDE)
+ add_definitions(-D_WIN32_WINNT=0x0500)
+ message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+# workaround for bug in mingw gcc 4.0
+ add_definitions(-U__STRICT_ANSI__)
+endif(MINGW AND NOT HAVE_KDE)
+
+# Now set up install locations; those are set by KDE if integration is enabled
+if(NOT HAVE_KDE)
+ if(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
+ else(WIN32)
+ set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
+ set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
+ set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
+ set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
+ endif(WIN32)
+endif(NOT HAVE_KDE)
+
+if(EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else(EMBED_DATA)
+ message(STATUS "Installing data files separately")
+endif(EMBED_DATA)
+
+# RPATH needs to be set correctly
+# Do this down here, since otherwise KDE wants to handle it itself, and fails
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
# Set global buildflags
-# This is very much non-portable, so don't use -DSTATICGCC until you know what
+# This is very much non-portable, so don't use -DSTATIC until you know what
# you do.
if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
- if(OPENSSL_FOUND)
+ if(HAVE_SSL)
set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
- endif(OPENSSL_FOUND)
+ endif(HAVE_SSL)
endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
-if(STATIC AND WIN32)
- link_libraries(imm32 winmm) # missing by default :/
- if(OPENSSL_FOUND)
- link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(OPENSSL_FOUND)
-endif(STATIC AND WIN32)
-
if(WIN32)
- set(WIN32_RC src/icons/win32.rc) # for app icons on windows
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+ if(MSVC)
+ set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+ link_libraries(Version dwmapi shlwapi)
+ endif(MSVC)
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
+ link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+ endif(HAVE_SSL AND STATIC)
endif(WIN32)
-# Here comes the dirty part. Our targets need different Qt4 modules, i.e. different libs
-# and defines. We can't simply include UseQt4 several times, since definitions add up.
-# We workaround this by using our own macro to figure out what to add.
-
-# This macro sets variables for additional Qt modules.
-macro(setup_qt4_variables)
- set(QUASSEL_QT_LIBRARIES )
- IF(WIN32)
- set(MAIN MAIN)
- ENDIF(WIN32)
- foreach(qtmod CORE ${ARGV} ${MAIN})
- set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_QT${qtmod}_LIBRARY} ${QT_${qtmod}_LIB_DEPENDENCIES})
- endforeach(qtmod ${ARGV})
- set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_LIBRARIES})
-endmacro(setup_qt4_variables)
-
-# Now we have everything, so just glue the right pieces together :)
-if(WANT_CORE)
- setup_qt4_variables(NETWORK SCRIPT SQL)
- add_executable(quasselcore ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_SQL} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quasselcore PROPERTIES
- COMPILE_FLAGS "-DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_CORE")
- target_link_libraries(quasselcore mod_core mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_CORE)
-
-if(WANT_QTCLIENT)
- setup_qt4_variables(GUI NETWORK)
- add_executable(quasselclient WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quasselclient PROPERTIES
- COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DBUILD_QTUI")
- target_link_libraries(quasselclient mod_qtui mod_uisupport mod_client mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_QTCLIENT)
-
-if(WANT_MONO)
- setup_qt4_variables(GUI NETWORK SCRIPT SQL)
- add_executable(quassel WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_SQL} ${RC_I18N} ${WIN32_RC})
- set_target_properties(quassel PROPERTIES
- COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_MONO")
- target_link_libraries(quassel mod_qtui mod_uisupport mod_client mod_core mod_common
- ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
-endif(WANT_MONO)
-
-# Build bundles for MacOSX
-if(APPLE)
- add_custom_command(TARGET quasselclient POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
- ${CMAKE_SOURCE_DIR} "Quassel Client" quasselclient)
- add_custom_command(TARGET quassel POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
- ${CMAKE_SOURCE_DIR} "Quassel" quassel)
- if(DEPLOY)
- add_custom_command(TARGET quasselclient POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Client)
- add_custom_command(TARGET quasselcore POST_BUILD
- COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Core)
- endif(DEPLOY)
-endif(APPLE)
-
-# Install rules
-if(WANT_CORE)
- install(TARGETS quasselcore
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-endif(WANT_CORE)
-
-if(WANT_QTCLIENT)
- install(TARGETS quasselclient
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-
- install(FILES quasselclient.desktop
- DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_QTCLIENT)
-
-if(WANT_MONO)
- install(TARGETS quassel
- RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-
- install(FILES quassel.desktop
- DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(WANT_MONO)
+if(HAVE_INDICATEQT)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
+endif(HAVE_INDICATEQT)
+
+if(NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+ if(HAVE_UMASK)
+ add_definitions(-DHAVE_UMASK)
+ endif(HAVE_UMASK)
+endif(NOT WIN32)
+
+# Generate version information from Git
+include(GetGitRevisionDescription)
+get_git_head_revision(GIT_REFSPEC GIT_HEAD)
+git_describe(GIT_DESCRIBE --long)
+
+# Sanitize things if we're not in a Git repo
+if(NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+ set(GIT_HEAD "")
+ set(GIT_DESCRIBE "")
+endif()
+
+configure_file(version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
+
+# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
+set(COMMON_DEPS ${RC_WIN32})
+set(CORE_DEPS )
+set(CLIENT_DEPS )
+
+# Add needed subdirs - the order is important, since src needs some vars set by other dirs
+add_subdirectory(data)
+add_subdirectory(icons)
+add_subdirectory(pics)
+add_subdirectory(po)
+add_subdirectory(src)