# This is the cmake-based build system for Quassel IRC.
# You may pass various options to cmake:
-# -DBUILD=<string> : Select binaries to build. <string> may contain any combination
-# of "core", "client", "mono" or "all".
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=1 : Enable static building of Quassel, most useful with a static Qt.
-# -DSTATICWIN=1 : Enable static building for Windows.
-# -DSPUTDEV : Do not use.
+# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
+# : select binaries to build
+# -DWITH_OPENSSL=OFF : Disable OpenSSL support
+# -DWITH_DBUS=OFF : Disable D-Bus support
+# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
+# -DSTATIC=ON : Enable static building of Quassel. Use with care.
+# -DSPUTDEV=ON : Do not use.
+# -DDEPLOY=ON : Mac OS X only. Use only fore redistribution Quassel Packages!!
#
# NOTE: You need to remove CMakeCache.txt if you plan to change any of these values!
project(QuasselIRC)
-cmake_minimum_required(VERSION 2.4.5)
+# Target scopes don't work in older versions
+cmake_minimum_required(VERSION 2.4.7 FATAL_ERROR)
-# This would suppress annoying warnings on cmake-2.6, but we can't use it
-# with 2.4, so... DUH!
-# cmake_policy(SET CMP0003 OLD) # suppress linker warnings
+if(COMMAND cmake_policy)
+ cmake_policy(SET CMP0003 NEW)
+endif(COMMAND cmake_policy)
-if(STATICWIN)
+# Use our own (well, KDE's) version of some modules
+# In particular cmake's FindQt4 and FindOpenSSL are quite buggy
+set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules)
+
+# Various options and variables that can be set on the command line
+option(WANT_CORE "Build the core (server) binary" ON)
+option(WANT_QTCLIENT "Build the Qt4 GUI client binary" ON)
+option(WANT_MONO "Build the monolithic (all-in-one) binary" OFF)
+
+option(WITH_OPENSSL "Enable OpenSSL support if present on the system" ON)
+option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
+
+option(STATIC "Enable static building (might not be portable)" OFF)
+option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
+option(SPUTDEV "Do not use!" OFF)
+
+set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt")
+set(LINGUAS "" CACHE STRING "Space-separated List of locales specifying languages that should be compiled")
+
+if(STATIC)
set(CMAKE_BUILD_TYPE Release)
-endif(STATICWIN)
+endif(STATIC)
+
+# RPATH needs to be set correctly
+set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
+set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
# Enable various flags on gcc
-include(CheckCXXCompilerFlag)
-check_cxx_compiler_flag(-Wall Wall)
-if(Wall)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
-endif(Wall)
-check_cxx_compiler_flag(-Wextra Wextra)
-if(Wextra)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wextra")
-endif(Wextra)
-check_cxx_compiler_flag(-ansi ansi)
-if(ansi)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi")
-endif(ansi)
-
-set(QT_MIN_VERSION "4.3.0")
-
-# By default, we build all binaries
-if(NOT DEFINED BUILD)
- set(BUILD all)
-endif(NOT DEFINED BUILD)
-
-# User might define which binaries to build by invoking cmake -DBUILD=<string>,
-# where <string> might contain any combination of "core", "client", "mono" or "all"
-if(BUILD MATCHES all)
- set(BUILD_CORE true)
- set(BUILD_QTCLIENT true)
- set(BUILD_MONO true)
- message(STATUS "Building Quassel Client, Quassel Core and monolithic Quassel.")
-else(BUILD MATCHES all)
- if(BUILD MATCHES core)
- set(BUILD_CORE true)
- message(STATUS "Building Quassel Core")
- endif(BUILD MATCHES core)
- if(BUILD MATCHES client)
- set(BUILD_QTCLIENT true)
- message(STATUS "Building Quassel Client")
- endif(BUILD MATCHES client)
- if(BUILD MATCHES mono)
- set(BUILD_MONO true)
- message(STATUS "Building monolithic Quassel")
- endif(BUILD MATCHES mono)
-endif(BUILD MATCHES all)
+if(CMAKE_COMPILER_IS_GNUCXX)
+ include(CheckCXXCompilerFlag)
+ check_cxx_compiler_flag(-Wall HAVE_WALL)
+ if(HAVE_WALL)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+ endif(HAVE_WALL)
+ check_cxx_compiler_flag(-Wextra HAVE_WEXTRA)
+ if(HAVE_WEXTRA)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wextra")
+ endif(HAVE_WEXTRA)
+ check_cxx_compiler_flag(-ansi HAVE_ANSI)
+ if(HAVE_ANSI)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ansi")
+ endif(HAVE_ANSI)
+endif(CMAKE_COMPILER_IS_GNUCXX)
+
+set(QT_MIN_VERSION "4.4.0")
+
+if(APPLE AND DEPLOY)
+ set(CMAKE_OSX_ARCHITECTURES "i386;ppc")
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=10.4")
+ set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.4u.sdk/")
+ add_definitions(-DMAC_10_4_SDK)
+endif(APPLE AND DEPLOY)
# Enable mostly b0rked stuff (new ChatView), do not enable this unless you know what you do...
if(SPUTDEV)
add_definitions(-DSPUTDEV)
endif(SPUTDEV)
-# Set up OpenSSL
-find_package(OpenSSL)
+# Set up execinfo
+
+# The problem with this library is that it is built-in in the Linux glib,
+# while on systems like FreeBSD, it is installed separately and thus needs to be linked to.
+# Therefore, we search for the header to see if the it's available in the first place.
+# If it is available, we try to locate the library to figure out whether it is built-in or not.
+
+find_path(EXECINFO_H_DIR "execinfo.h")
+
+if(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
+ # We found the header file's include dir.
+ # Let's add it so the compiler finds it as well.
+ include_directories(${EXECINFO_H_DIR})
+
+ # Now determine if it's built-in or not, by searching the library file.
+ find_library(EXECINFO_LIB_PATH "execinfo")
+
+ if(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
+ # Built-in, no further action is needed
+ message(STATUS "Found execinfo")
+ else(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
+ # It's an external library, link it.
+ link_libraries(${EXECINFO_LIB_PATH})
+ message(STATUS "Found execinfo: ${EXECINFO_LIB_PATH}")
+ endif(EXECINFO_LIB_PATH STREQUAL "EXECINFO_LIB_PATH-NOTFOUND")
+
+ set(HAVE_EXECINFO true)
+
+endif(NOT EXECINFO_H_DIR STREQUAL "EXECINFO_H_DIR-NOTFOUND")
+
+if(HAVE_EXECINFO)
+ add_definitions(-DHAVE_EXECINFO)
+endif(HAVE_EXECINFO)
# Select a Qt installation here, if you don't want to use system Qt
-if(DEFINED QT)
+if(QT)
# FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
set(ENV{PATH} ${QT}/bin:$ENV{PATH})
- #SET(QT_QMAKE_EXECUTABLE ${QT}/bin/qmake CACHE FILEPATH "" FORCE)
-endif(DEFINED QT)
+endif(QT)
# Now that we have the correct $PATH, lets find Qt!
find_package(Qt4 REQUIRED)
include(${QT_USE_FILE})
include_directories(${QT_INCLUDES})
+# Setup OpenSSL
+if(WITH_OPENSSL)
+ find_package(OpenSSL)
+else(WITH_OPENSSL)
+ message(STATUS "Disabling OpenSSL support")
+endif(WITH_OPENSSL)
+
+if(OPENSSL_FOUND)
+ if(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
+ message(STATUS "Found OpenSSL support in Qt")
+ add_definitions(-DHAVE_SSL)
+ set(HAVE_SSL true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_SSL)
+ else(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
+ message(STATUS "No OpenSSL support found in Qt, disabling")
+ endif(NOT QT_DEFINITIONS MATCHES "QT_NO_OPENSSL")
+else(OPENSSL_FOUND)
+ add_definitions(-DQT_NO_OPENSSL)
+endif(OPENSSL_FOUND)
+
+# Setup D-Bus support
+if(WITH_DBUS)
+ if(QT_QTDBUS_FOUND)
+ message(STATUS "Found QtDBus, enabling D-Bus support")
+ add_definitions(-DHAVE_DBUS)
+ set(LINK_DBUS DBUS)
+ set(HAVE_DBUS true)
+ set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_DBUS)
+ else(QT_QTDBUS_FOUND)
+ message(STATUS "QtDBus not found, disabling D-Bus support")
+ endif(QT_QTDBUS_FOUND)
+else(WITH_DBUS)
+ message(STATUS "Disabling D-Bus support")
+endif(WITH_DBUS)
+
# We need to create a version.gen
# For this, we create our genversion binary and make sure it is run every time.
add_executable(genversion ${CMAKE_SOURCE_DIR}/src/common/genversion.cpp)
-target_link_libraries(genversion ${QT_LIBRARIES})
+target_link_libraries(genversion ${QT_LIBRARIES} ${QT_CORE_LIB_DEPENDENCIES})
-add_custom_target(genversion_run ALL ${CMAKE_BINARY_DIR}/genversion
+get_target_property(GENVERSION_EXECUTABLE genversion LOCATION)
+add_custom_target(genversion_run ALL ${GENVERSION_EXECUTABLE}
${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}/src/common/version.gen)
add_dependencies(genversion_run genversion)
# Add needed subdirs
add_subdirectory(src/common)
include_directories(src/common)
-if(BUILD_CORE OR BUILD_MONO)
+if(WANT_CORE OR WANT_MONO)
add_subdirectory(src/core)
include_directories(src/core)
-endif(BUILD_CORE OR BUILD_MONO)
-if(BUILD_QTCLIENT OR BUILD_MONO)
+endif(WANT_CORE OR WANT_MONO)
+if(WANT_QTCLIENT OR WANT_MONO)
add_subdirectory(src/client)
add_subdirectory(src/uisupport)
add_subdirectory(src/qtui)
include_directories(src/client)
include_directories(src/uisupport)
include_directories(src/qtui)
-endif(BUILD_QTCLIENT OR BUILD_MONO)
+endif(WANT_QTCLIENT OR WANT_MONO)
# Make sure version.gen exists before building mod_common
add_dependencies(mod_common genversion_run)
+# Generate binary translation files
+include(QuasselGenerateTranslations)
+quassel_generate_i18n_resource(RC_I18N ${LINGUAS})
+
# Add resources
-qt4_add_resources(RC_I18N i18n/i18n.qrc)
qt4_add_resources(RC_ICONS src/icons/icons.qrc)
qt4_add_resources(RC_QUASSEL_ICONS src/icons/quassel-icons.qrc)
qt4_add_resources(RC_SQL src/core/sql.qrc)
# Set global buildflags
-if(DEFINED STATIC)
- set(CMAKE_EXE_LINKER_FLAGS "-static-libgcc ${CMAKE_EXE_LINKER_FLAGS}")
- link_directories(${CMAKE_BINARY_DIR}/staticlibs)
-endif(DEFINED STATIC)
-
-if(STATICWIN AND WIN32)
+# This is very much non-portable, so don't use -DSTATICGCC until you know what
+# you do.
+if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
+ set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
+ link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
+ if(HAVE_SSL)
+ set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
+ endif(HAVE_SSL)
+endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
+
+if(STATIC AND WIN32)
link_libraries(imm32 winmm) # missing by default :/
- if(OPENSSL_FOUND)
+ if(HAVE_SSL)
link_libraries(${OPENSSL_LIBRARIES} libeay32MD)
- endif(OPENSSL_FOUND)
-endif(STATICWIN AND WIN32)
+ endif(HAVE_SSL)
+endif(STATIC AND WIN32)
if(WIN32)
set(WIN32_RC src/icons/win32.rc) # for app icons on windows
# This macro sets variables for additional Qt modules.
macro(setup_qt4_variables)
set(QUASSEL_QT_LIBRARIES )
- foreach(qtmod CORE ${ARGV})
+ IF(WIN32)
+ set(MAIN MAIN)
+ ENDIF(WIN32)
+ foreach(qtmod CORE ${ARGV} ${MAIN})
set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_QT${qtmod}_LIBRARY} ${QT_${qtmod}_LIB_DEPENDENCIES})
endforeach(qtmod ${ARGV})
set(QUASSEL_QT_LIBRARIES ${QUASSEL_QT_LIBRARIES} ${QT_LIBRARIES})
endmacro(setup_qt4_variables)
# Now we have everything, so just glue the right pieces together :)
-if(BUILD_CORE)
+if(WANT_CORE)
setup_qt4_variables(NETWORK SCRIPT SQL)
add_executable(quasselcore ${CMAKE_SOURCE_DIR}/src/common/main.cpp
${RC_SQL} ${RC_I18N} ${WIN32_RC})
set_target_properties(quasselcore PROPERTIES
COMPILE_FLAGS "-DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_CORE")
- target_link_libraries(quasselcore mod_core mod_common ${QUASSEL_QT_LIBRARIES})
-endif(BUILD_CORE)
-
-if(BUILD_QTCLIENT)
- setup_qt4_variables(GUI NETWORK)
- add_executable(quasselclient ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_I18N} ${WIN32_RC})
+ target_link_libraries(quasselcore mod_core mod_common
+ ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
+endif(WANT_CORE)
+
+if(WANT_QTCLIENT)
+ setup_qt4_variables(${LINK_DBUS} GUI NETWORK)
+ add_executable(quasselclient WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
+ ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_I18N} ${WIN32_RC})
set_target_properties(quasselclient PROPERTIES
COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DBUILD_QTUI")
- target_link_libraries(quasselclient mod_qtui mod_uisupport mod_client mod_common ${QUASSEL_QT_LIBRARIES})
-endif(BUILD_QTCLIENT)
-
-if(BUILD_MONO)
- setup_qt4_variables(GUI NETWORK SCRIPT SQL)
- add_executable(quassel ${CMAKE_SOURCE_DIR}/src/common/main.cpp
- ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_SQL} ${RC_I18N} ${WIN32_RC})
+ target_link_libraries(quasselclient mod_qtui mod_uisupport mod_client mod_common
+ ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
+endif(WANT_QTCLIENT)
+
+if(WANT_MONO)
+ setup_qt4_variables(${LINK_DBUS} GUI NETWORK SCRIPT SQL)
+ add_executable(quassel WIN32 ${CMAKE_SOURCE_DIR}/src/common/main.cpp
+ ${RC_ICONS} ${RC_QUASSEL_ICONS} ${RC_SQL} ${RC_I18N} ${WIN32_RC})
set_target_properties(quassel PROPERTIES
COMPILE_FLAGS "-DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_SCRIPT_LIB -DQT_SQL_LIB -DBUILD_MONO")
- target_link_libraries(quassel mod_qtui mod_uisupport mod_client mod_core mod_common ${QUASSEL_QT_LIBRARIES})
-endif(BUILD_MONO)
+ target_link_libraries(quassel mod_qtui mod_uisupport mod_client mod_core mod_common
+ ${QUASSEL_QT_LIBRARIES} ${QUASSEL_SSL_LIBRARIES})
+endif(WANT_MONO)
# Build bundles for MacOSX
if(APPLE)
add_custom_command(TARGET quassel POST_BUILD
COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makebundle.py
${CMAKE_SOURCE_DIR} "Quassel" quassel)
+ if(DEPLOY)
+ add_custom_command(TARGET quasselclient POST_BUILD
+ COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Client)
+ add_custom_command(TARGET quasselcore POST_BUILD
+ COMMAND ${CMAKE_SOURCE_DIR}/scripts/build/macosx_makePackage.sh Core)
+ endif(DEPLOY)
endif(APPLE)
# Install rules
-if(BUILD_CORE)
+if(WANT_CORE)
install(TARGETS quasselcore
RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-endif(BUILD_CORE)
+endif(WANT_CORE)
-if(BUILD_QTCLIENT)
+if(WANT_QTCLIENT)
install(TARGETS quasselclient
RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
install(FILES quasselclient.desktop
DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(BUILD_QTCLIENT)
+endif(WANT_QTCLIENT)
-if(BUILD_MONO)
+if(WANT_MONO)
install(TARGETS quassel
RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
install(FILES quassel.desktop
DESTINATION ${CMAKE_INSTALL_PREFIX}/share/applications)
-endif(BUILD_MONO)
+endif(WANT_MONO)