-# This is the cmake-based build system for Quassel IRC.
+# Main CMake file for building Quassel IRC
#
-# You may pass various options to cmake:
-#
-# -DWANT_(CORE|QTCLIENT|MONO)=(ON|OFF)
-# : select binaries to build
-# -DWITH_OPENSSL=OFF : Disable OpenSSL support
-# -DWITH_DBUS=OFF : Disable D-Bus support (dbus notifications)
-# -DWITH_WEBKIT=OFF : Disable WebKit support (link previews)
-# -DWITH_PHONON=OFF : Disable Phonon support (audio notifications)
-# -DWITH_LIBINDICATE=OFF : Disable libindicate support (Ayatana notifications)
-# -DWITH_KDE=ON : Enable KDE4 support
-# -DWITH_CRYPT=OFF : Disable encryption support
-# -DWITH_OXYGEN=(ON|OFF) : Whether to install Oxygen icons (default: yes, unless KDE > 4.3.0 is present and enabled)
-# -DWITH_SYSLOG=OFF : Disable syslog support
-#
-# -DEMBED_DATA=ON : Embed all data files in icons the binary, rather than installing them separately
-#
-# -DQT=/path/to/qt : Choose a Qt4 installation to use instead of the system Qt4
-# -DSTATIC=ON : Enable static building of Quassel. Use with care.
-# -DDEPLOY=ON : Mac OS X only. Use only for creating Quassel Packages!
-#
-# -DWITH_QT5=ON : Enable (very) experimental support for Qt5 (see doc/README.Qt5!)
-#
-# NOTE: You should remove CMakeCache.txt if you plan to change any of these values!
+# See INSTALL for possible CMake options (or read the code, Luke)
+#####################################################################
+# General setup
+#####################################################################
-cmake_minimum_required(VERSION 2.8.9)
project(QuasselIRC)
# Versions
set(QUASSEL_MAJOR 0)
-set(QUASSEL_MINOR 11)
-set(QUASSEL_PATCH 0)
-set(QUASSEL_VERSION_STRING "0.11-pre")
+set(QUASSEL_MINOR 12)
+set(QUASSEL_PATCH 2)
+set(QUASSEL_VERSION_STRING "0.12.2")
+
+# We want to know CMake's version for debug reasons
+message(STATUS "Using CMake ${CMAKE_VERSION}")
-# Tell CMake about or own stuff
+# Tell CMake about or own modules
set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
+# General conveniences
+set(CMAKE_AUTOMOC ON)
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
+
+# Include various CMake modules...
+include(CMakePushCheckState)
include(CheckFunctionExists)
include(CheckIncludeFile)
+include(CheckCXXSourceCompiles)
+include(CMakeDependentOption)
+include(FeatureSummary)
+# ... and our own stuff
include(QuasselCompileSettings)
include(QuasselMacros)
-# Various options and variables that can be set on the command line
+
+# Options and variables that can be set on the command line
+#####################################################################
+
+# First, choose a Qt version. We support USE_QT4 and USE_QT5; if neither is set, prefer Qt4 for now
+option(USE_QT5 "Enable support for Qt5 (disables KDE integration)" OFF)
+if (USE_QT4) # takes precedence
+ set(USE_QT5 OFF)
+else()
+ if (NOT USE_QT5)
+ set(USE_QT4 ON)
+ endif()
+endif()
+
+# Select the binaries to build
option(WANT_CORE "Build the core (server) binary" ON)
-option(WANT_QTCLIENT "Build the Qt4 GUI client binary" ON)
+option(WANT_QTCLIENT "Build the client-only binary" ON)
option(WANT_MONO "Build the monolithic (all-in-one) binary" ON)
+add_feature_info(WANT_CORE WANT_CORE "Build the core (server) binary")
+add_feature_info(WANT_QTCLIENT WANT_QTCLIENT "Build the client-only binary (requires a core to connect to)")
+add_feature_info(WANT_MONO WANT_MONO "Build the monolithic (all-in-one) binary")
+
+# Whether to enable KDE integration (work in progress for Qt5 / KDE Frameworks)
+# Note that when building with Qt5, WITH_KDE enables integration with higher-tier KDE frameworks that
+# require runtime support. We still optionally make use of certain Tier 1 frameworks even if WITH_KDE
+# is disabled.
+if (USE_QT4)
+ option(WITH_KDE "KDE4 integration" OFF)
+ add_feature_info(WITH_KDE WITH_KDE "Enable KDE4 integration")
+else()
+ option(WITH_KDE "Integration with the KDE Frameworks runtime environment")
+ add_feature_info(WITH_KDE WITH_KDE "Integrate with the KDE Frameworks runtime environment")
+endif()
+
+cmake_dependent_option(WITH_OXYGEN "Install Oxygen icon set (usually shipped with KDE)" ON "NOT WITH_KDE" OFF)
+if (NOT WITH_KDE)
+ add_feature_info(WITH_OXYGEN WITH_OXYGEN "Install Oxygen icon set")
+endif()
+
+# For this, the feature info is added after we know if QtWebkit is installed
+option(WITH_WEBKIT "WebKit support (for link previews)" ON)
+
+if (APPLE)
+ # Notification Center is only available in > 10.8, which is Darwin v12
+ if (CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
+ option(WITH_NOTIFICATION_CENTER "OS X Notification Center support" ON)
+ add_feature_info(WITH_NOTIFICATION_CENTER WITH_NOTIFICATION_CENTER "Use the OS X Notification Center")
+ endif()
+endif()
+
+# Always embed on Windows, OSX or for a static build; never embed when enabling KDE integration
+set(EMBED_DEFAULT OFF)
+if (STATIC OR WIN32 OR APPLE)
+ set(EMBED_DEFAULT ON)
+endif()
+cmake_dependent_option(EMBED_DATA "Embed icons and translations into the binaries instead of installing them" ${EMBED_DEFAULT}
+ "NOT STATIC;NOT WIN32;NOT WITH_KDE" ${EMBED_DEFAULT})
+if (NOT EMBED_DEFAULT)
+ add_feature_info(EMBED_DATA EMBED_DATA "Embed icons and translations in the binaries instead of installing them")
+endif()
+
+# The following options are not for end-user consumption, so don't list them in the feature summary
+cmake_dependent_option(DEPLOY "Add required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF "APPLE" OFF)
-option(WITH_OPENSSL "Enable OpenSSL support if present on the system" ON)
-option(WITH_DBUS "Enable D-Bus support if present on the system" ON)
-option(WITH_WEBKIT "Enable WebKit support (for link previews)" ON)
-option(WITH_PHONON "Enable Phonon support (for audio notifications)" ON)
-option(WITH_LIBINDICATE "Enable Ayatana notification support" ON)
-option(WITH_KDE "Enable KDE4 integration" OFF)
-option(WITH_CRYPT "Enable encryption support if present on system" ON)
-option(WITH_SYSLOG "Use syslog for storing log data" ON)
-
-# We use icon paths from KDE 4.3.x, which are partially invalid on older and possibly
-# even on newer KDE versions. Do not disable this unless you are sure that your Quassel will
-# run on a matching KDE version only.
-set(WITH_OXYGEN AUTO CACHE STRING "Install Oxygen icons (default is \"AUTO\" to install when KDE 4.3 or later is present")
-
-# Enable very experimental support for Qt5. Might break the compilation, or even more!
-option(WITH_QT5 "Enable (very) experimental support for Qt5" OFF)
-
-option(STATIC "Enable static building (might not be portable)" OFF)
-
-if(APPLE)
- option(DEPLOY "Mac OS X only! Adds required libs to bundle resources and create a dmg. Note: requires Qt to be built with 10.4u SDK" OFF)
- # Notification Center is only available in > 10.8, which is Darwin v12
- if(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
- option(WITH_NOTIFICATION_CENTER "Enable OS X Notification Center support" ON)
- endif(CMAKE_SYSTEM_VERSION VERSION_GREATER "11.9.9")
-endif(APPLE)
-
-# Default to embedding data in the static case
-if(STATIC OR WIN32)
- set(EMBED_DEFAULT ON)
-else(STATIC OR WIN32)
- set(EMBED_DEFAULT ON) # should be OFF as soon as everything works
-endif(STATIC OR WIN32)
-
-option(EMBED_DATA "Embed all data files in the binary (rather than installing them separately)" ${EMBED_DEFAULT})
-
-set(QT "" CACHE STRING "Path to a Qt installation to use instead of the system Qt (e.g. for static builds)")
-
-# Some settings imply others
-if(STATIC)
- add_definitions(-DSTATIC)
- set(WITH_KDE OFF CACHE BOOL "Static building with KDE is not supported")
-endif(STATIC)
-
-if(WIN32)
- # We don't support separately installed resources yet on Win32
- set(EMBED_DATA ON)
-endif(WIN32)
+# Handle with care
+set(QT_PATH "" CACHE PATH "Path to a Qt4 installation to use instead of the system Qt (e.g. for static builds)")
+
+# Static builds are not supported and require some manual setup! Don't enable unless you know what you're doing (we don't know either)
+cmake_dependent_option(STATIC "Enable static building (not supported)" OFF "NOT WITH_KDE" OFF)
# For static builds, arbitrary extra libs might need to be linked
# Define a comma-separated list here
# e.g. for pgsql, we need -DLINK_EXTRA=pq;crypt
set(LINK_EXTRA "" CACHE STRING "Semicolon-separated list of libraries to be linked")
-if(LINK_EXTRA)
- string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
- link_libraries(${LINK_EXTRA})
-endif(LINK_EXTRA)
+if (LINK_EXTRA)
+ string(REPLACE "," ";" LINK_EXTRA ${LINK_EXTRA})
+ link_libraries(${LINK_EXTRA})
+endif()
-# Build Types
+# Setup CMake
+#####################################################################
-# Simplify checks
-if(WANT_MONO OR WANT_QTCLIENT)
- set(BUILD_GUI true)
-endif(WANT_MONO OR WANT_QTCLIENT)
-if(WANT_MONO OR WANT_CORE)
- set(BUILD_CORE true)
-endif(WANT_MONO OR WANT_CORE)
+if (USE_QT5 AND WITH_KDE)
+ cmake_minimum_required(VERSION 2.8.12)
+else()
+ cmake_minimum_required(VERSION 2.8.9)
+endif()
+# Setting COMPILE_DEFINITIONS_<CONFIG> is deprecated since CMake 3.0 in favor of generator expressions.
+# These have existed since CMake 2.8.10; until we depend on that, we have to explicitly enable the old policy.
+if (CMAKE_MAJOR_VERSION GREATER 2)
+ cmake_policy(SET CMP0043 OLD)
+endif()
-# Version checks
-################
-if(WITH_QT5)
- set(QT_MIN_VERSION "5.0.0")
- add_definitions(-DHAVE_QT5)
+# Simplify later checks
+#####################################################################
- # Qt5 needs a new enough cmake...
- cmake_minimum_required(VERSION 2.8.6 FATAL_ERROR)
+if (WANT_MONO OR WANT_QTCLIENT)
+ set(BUILD_GUI true)
+endif()
+if (WANT_MONO OR WANT_CORE)
+ set(BUILD_CORE true)
+endif()
- # ... for automoc
- set(CMAKE_AUTOMOC ON)
-else(WITH_QT5)
- # GUI stuff needs some new features
- if(BUILD_GUI)
- set(QT_MIN_VERSION "4.6.0")
- else(BUILD_GUI)
- set(QT_MIN_VERSION "4.4.0")
- endif(BUILD_GUI)
-endif(WITH_QT5)
+# Set up Qt
+#####################################################################
+if (USE_QT5)
+ message(STATUS "Building for Qt5...")
+ set(QT_MIN_VERSION "5.2.0")
+ add_definitions(-DHAVE_QT5)
+else()
+ message(STATUS "Building for Qt4...")
+ set(QT_MIN_VERSION "4.8.0")
+
+ # Select a Qt installation here, if you don't want to use system Qt
+ if(QT_PATH)
+ # FindQt4 will look for the qmake binary in $PATH, so we just prepend QT_PATH
+ set(ENV{PATH} ${QT_PATH}/bin:$ENV{PATH})
+ endif()
+endif()
-# Dependencies
-##############
-if(WITH_QT5)
- find_package(Qt5Core ${QT_MIN_VERSION} REQUIRED)
- # We need QtWidgets
- set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Widgets)
+# Find package dependencies
+#
+# Note that you can forcefully disable optional packages
+# using -DCMAKE_DISABLE_FIND_PACKAGE_<PkgName>=TRUE
+#####################################################################
+
+if (USE_QT5)
+ find_package(Qt5Core ${QT_MIN_VERSION} QUIET)
+ set_package_properties(Qt5Core PROPERTIES TYPE REQUIRED
+ URL "http://qt.digia.com"
+ DESCRIPTION "contains core functionality for Qt"
+ )
+ # find_package without REQUIRED won't check for the version properly; also, older Qt5 versions
+ # used Qt5Core_VERSION_STRING... let's just make sure here that we bail out here if our Qt5 is not new enough.
+ if (NOT Qt5Core_VERSION OR Qt5Core_VERSION VERSION_LESS ${QT_MIN_VERSION})
+ message(FATAL_ERROR "Could NOT find Qt5 >= version ${QT_MIN_VERSION}!")
+ endif()
+
+ find_package(Qt5Network QUIET)
+ set_package_properties(Qt5Network PROPERTIES TYPE REQUIRED
+ DESCRIPTION "the network module for Qt5"
+ )
- # Setup the i18n-related variables
- find_package(Qt5LinguistTools)
+ if (BUILD_GUI)
+ find_package(Qt5Gui QUIET)
+ set_package_properties(Qt5Gui PROPERTIES TYPE REQUIRED
+ DESCRIPTION "the GUI module for Qt5"
+ )
+ find_package(Qt5Widgets QUIET)
+ set_package_properties(Qt5Widgets PROPERTIES TYPE REQUIRED
+ DESCRIPTION "the widgets module for Qt5"
+ )
+
+ find_package(Qt5DBus QUIET)
+ set_package_properties(Qt5DBus PROPERTIES TYPE RECOMMENDED
+ URL "http://qt.digia.com"
+ DESCRIPTION "D-Bus support for Qt5"
+ PURPOSE "Needed for supporting D-Bus-based notifications and tray icon, used by most modern desktop environments"
+ )
+ if (Qt5DBus_FOUND)
+ find_package(dbusmenu-qt5 QUIET CONFIG)
+ set_package_properties(dbusmenu-qt5 PROPERTIES TYPE RECOMMENDED
+ URL "https://launchpad.net/libdbusmenu-qt"
+ DESCRIPTION "a library implementing the DBusMenu specification"
+ PURPOSE "Required for having a context menu for the D-Bus-based tray icon"
+ )
+ endif()
+
+ find_package(Phonon4Qt5 QUIET)
+ set_package_properties(Phonon4Qt5 PROPERTIES TYPE RECOMMENDED
+ URL "https://projects.kde.org/projects/kdesupport/phonon"
+ DESCRIPTION "a multimedia abstraction library"
+ PURPOSE "Required for audio notifications"
+ )
+
+ find_package(LibsnoreQt5 0.7.0 QUIET)
+ set_package_properties(LibsnoreQt5 PROPERTIES TYPE OPTIONAL
+ URL "https://projects.kde.org/projects/playground/libs/snorenotify"
+ DESCRIPTION "a cross-platform notification framework"
+ PURPOSE "Enable support for the snorenotify framework"
+ )
+ if(LibsnoreQt5_FOUND)
+ find_package(LibsnoreSettingsQt5)
+ set_package_properties(LibsnoreSettingsQt5 PROPERTIES TYPE REQUIRED
+ URL "https://projects.kde.org/projects/playground/libs/snorenotify"
+ DESCRIPTION "a cross-platform notification framework"
+ PURPOSE "Enable support for the snorenotify framework"
+ )
+ endif()
+
+
+ if (WITH_WEBKIT)
+ find_package(Qt5WebKit QUIET)
+ set_package_properties(Qt5WebKit PROPERTIES TYPE RECOMMENDED
+ URL "http://qt.digia.com"
+ DESCRIPTION "a WebKit implementation for Qt"
+ PURPOSE "Needed for displaying previews for URLs in chat"
+ )
+ if (Qt5WebKit_FOUND)
+ find_package(Qt5WebKitWidgets QUIET)
+ set_package_properties(Qt5WebKitWidgets PROPERTIES TYPE RECOMMENDED
+ URL "http://qt.digia.com"
+ DESCRIPTION "widgets for Qt's WebKit implementation"
+ PURPOSE "Needed for displaying previews for URLs in chat"
+ )
+ endif()
+ endif()
+
+ if (WITH_WEBKIT AND Qt5WebKitWidgets_FOUND)
+ set(HAVE_WEBKIT true)
+ endif()
+ add_feature_info("WITH_WEBKIT, QtWebKit and QtWebKitWidgets modules" HAVE_WEBKIT "Support showing previews for URLs in chat")
+
+ # KDE Frameworks
+ ################
+
+ if (WITH_KDE)
+ set(ecm_find_type "REQUIRED")
+ else()
+ # Even with KDE integration disabled, we optionally use tier1 frameworks if we find them
+ set(ecm_find_type "RECOMMENDED")
+ endif()
+
+ # extra-cmake-modules
+ find_package(ECM NO_MODULE QUIET)
+ set_package_properties(ECM PROPERTIES TYPE ${ecm_find_type}
+ URL "https://projects.kde.org/projects/kdesupport/extra-cmake-modules"
+ DESCRIPTION "extra modules for CMake, maintained by the KDE project"
+ PURPOSE "Required to find KDE Frameworks components"
+ )
+
+ if (ECM_FOUND)
+ list(APPEND CMAKE_MODULE_PATH ${ECM_MODULE_PATH})
+ endif()
+
+ if (WITH_KDE)
+ find_package(KF5 COMPONENTS ConfigWidgets CoreAddons Notifications NotifyConfig TextWidgets WidgetsAddons XmlGui QUIET)
+ set_package_properties(KF5 PROPERTIES TYPE REQUIRED
+ URL "http://www.kde.org"
+ DESCRIPTION "KDE Frameworks"
+ PURPOSE "Required for integration into the Plasma desktop"
+ )
+
+ endif()
+
+ endif(BUILD_GUI)
+
+ if (BUILD_CORE)
+ find_package(Qt5Script QUIET)
+ set_package_properties(Qt5Script PROPERTIES TYPE REQUIRED
+ DESCRIPTION "provides scripting support for Qt5"
+ )
+ find_package(Qt5Sql QUIET)
+ set_package_properties(Qt5Sql PROPERTIES TYPE REQUIRED
+ DESCRIPTION "the database support module for Qt5"
+ )
+
+ find_package(QCA2-QT5)
+ set_package_properties(QCA2-QT5 PROPERTIES TYPE RECOMMENDED
+ URL "https://projects.kde.org/projects/kdesupport/qca"
+ DESCRIPTION "Qt Cryptographic Architecture"
+ PURPOSE "Required for encryption support"
+ )
+
+ endif(BUILD_CORE)
+
+ find_package(Qt5LinguistTools QUIET)
+ set_package_properties(Qt5LinguistTools PROPERTIES TYPE RECOMMENDED
+ DESCRIPTION "contains tools for handling translation files"
+ PURPOSE "Required for having translations"
+ )
-else(WITH_QT5)
- # Select a Qt installation here, if you don't want to use system Qt
- if(QT)
- # FindQt4 will look for the qmake binary in $PATH, so we just prepend the Qt dir
- set(ENV{PATH} ${QT}/bin:$ENV{PATH})
- endif(QT)
+ # Some Qt5 versions do not define a target for lconvert, so we need to find it ourselves
+ if (Qt5LinguistTools_FOUND)
+ if (NOT TARGET Qt5::lconvert AND TARGET Qt5::lrelease)
+ get_target_property(_lrelease_location Qt5::lrelease LOCATION)
+ get_filename_component(_lrelease_path ${_lrelease_location} PATH)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ elseif(TARGET Qt5::lconvert AND NOT Qt5_LCONVERT_EXECUTABLE)
+ # Newer Qt5 versions define the target, but not the Qt5_LCONVERT_EXECUTABLE variable for some reason
+ get_target_property(QT_LCONVERT_EXECUTABLE Qt5::lconvert LOCATION)
+ endif()
+
+ # Compatibility with the Qt4 variables
+ set(QT_LRELEASE_EXECUTABLE ${Qt5_LRELEASE_EXECUTABLE})
+ set(QT_LUPDATE_EXECUTABLE ${Qt5_LUPDATE_EXECUTABLE})
+ if (Qt5_LCONVERT_EXECUTABLE)
+ set(QT_LCONVERT_EXECUTABLE ${Qt5_LCONVERT_EXECUTABLE})
+ endif()
+ endif()
+
+else(USE_QT5)
+ find_package(Qt4 ${QT_MIN_VERSION} QUIET REQUIRED)
+
+ if (BUILD_GUI)
+ add_feature_info("QtDBus module" QT_QTDBUS_FOUND "Needed for supporting D-Bus-based notifications and tray icon, used by most modern desktop environments")
+ if (QT_QTDBUS_FOUND)
+ find_package(dbusmenu-qt QUIET CONFIG)
+ set_package_properties(dbusmenu-qt PROPERTIES TYPE RECOMMENDED
+ URL "https://launchpad.net/libdbusmenu-qt"
+ DESCRIPTION "a library implementing the DBusMenu specification"
+ PURPOSE "Required for having a context menu for the D-Bus-based tray icon"
+ )
+ endif()
+
+ if (WITH_WEBKIT AND QT_QTWEBKIT_FOUND)
+ set(HAVE_WEBKIT true)
+ endif()
+ add_feature_info("WITH_WEBKIT and QtWebKit module" HAVE_WEBKIT "Support showing previews for URLs in chat")
+
+ if (WITH_KDE)
+ # KDE has overzealous CFLAGS making miniz not compile, so save our old flags
+ set(_cflags ${CMAKE_C_FLAGS})
+ find_package(KDE4 4.4 QUIET)
+ set_package_properties(KDE4 PROPERTIES TYPE REQUIRED
+ URL "http://www.kde.org"
+ DESCRIPTION "a world-class desktop environment"
+ PURPOSE "Enables various bits for improving integration with KDE"
+ )
+ set(CMAKE_C_FLAGS ${_cflags})
+
+ else(WITH_KDE)
+ find_package(Phonon QUIET)
+ set_package_properties(Phonon PROPERTIES TYPE RECOMMENDED
+ URL "https://projects.kde.org/projects/kdesupport/phonon"
+ DESCRIPTION "a multimedia abstraction library"
+ PURPOSE "Required for audio notifications"
+ )
+ endif(WITH_KDE)
+
+ find_package(IndicateQt QUIET)
+ set_package_properties(IndicateQt PROPERTIES TYPE OPTIONAL
+ URL "https://launchpad.net/libindicate-qt/"
+ DESCRIPTION "a library to raise flags on DBus for other components of the desktop to pick up and visualize"
+ PURPOSE "Provides integration into the Ayatana notification system used by e.g. Ubuntu"
+ )
+
+ endif(BUILD_GUI)
+
+ if (BUILD_CORE)
+
+ find_package(QCA2 QUIET)
+ set_package_properties(QCA2 PROPERTIES TYPE RECOMMENDED
+ URL "https://projects.kde.org/projects/kdesupport/qca"
+ DESCRIPTION "Qt Cryptographic Architecture"
+ PURPOSE "Required for encryption support"
+ )
+
+
+ endif()
+
+ # Qt4 does not consider lconvert relevant, so they don't support finding it...
+ # Rather than shipping hacked buildsys files, let's just infer the path from lrelease
+ if (QT_LRELEASE_EXECUTABLE)
+ get_filename_component(_lrelease_path ${QT_LRELEASE_EXECUTABLE} PATH)
+ find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt4 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+ endif()
+endif()
- # Now that we have the correct $PATH, lets find Qt!
- find_package(Qt4 ${QT_MIN_VERSION} REQUIRED)
-endif(WITH_QT5)
+# Non-Qt-based packages
-# Neither Qt4 nor Qt5 consider lconvert relevant, so they don't support finding it...
-# Rather than shipping hacked buildsys files, let's just infer the path from lrelease
-if(QT_LRELEASE_EXECUTABLE)
- get_filename_component(_lrelease_path ${QT_LRELEASE_EXECUTABLE} PATH)
- if(WITH_QT5)
- find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt5 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
- else(WITH_QT5)
- find_program(QT_LCONVERT_EXECUTABLE NAMES lconvert-qt4 lconvert PATHS ${_lrelease_path} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
- endif(WITH_QT5)
-endif(QT_LRELEASE_EXECUTABLE)
+# zlib for compression, however we can always fall back to miniz
+find_package(ZLIB QUIET)
+set_package_properties(ZLIB PROPERTIES TYPE RECOMMENDED
+ URL "http://www.zlib.net"
+ DESCRIPTION "a popular compression library"
+ PURPOSE "Use the most common library for protocol compression, instead of the bundled miniz implementation"
+)
+
+
+if (NOT WIN32)
+ # Execinfo is needed for generating backtraces
+ find_package(ExecInfo QUIET)
+ set_package_properties(ExecInfo PROPERTIES TYPE OPTIONAL
+ DESCRIPTION "a library for inspecting backtraces"
+ PURPOSE "Used for generating backtraces in case of a crash"
+ )
+endif()
+# Check for SSL support in Qt
+# As there's no easy way to get Qt's configuration in particular for Qt5, let's just compile
+# a small test program checking the defines. This works for both Qt4 and Qt5.
+cmake_push_check_state(RESET)
+set(CMAKE_REQUIRED_INCLUDES ${QT_INCLUDES} ${Qt5Core_INCLUDE_DIRS})
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Core_EXECUTABLE_COMPILE_FLAGS}")
+check_cxx_source_compiles("
+ #include \"qglobal.h\"
+ #if defined QT_NO_SSL
+ # error \"No SSL support\"
+ #endif
+ int main() {}"
+ HAVE_SSL)
+cmake_pop_check_state()
+
+# Additional compile settings
+#####################################################################
+
+# This sets -fPIC and friends if required by the installed Qt5 library
+if (USE_QT5 AND Qt5_POSITION_INDEPENDENT_CODE)
+ set(CMAKE_POSITION_INDEPENDENT_CODE ON)
+endif()
-# zlib for compression, however we can always fall back to miniz
-find_package(ZLIB)
-if(ZLIB_FOUND)
- message(STATUS "Using system zlib for compression")
- add_definitions(-DHAVE_ZLIB)
- include_directories(${ZLIB_INCLUDE_DIRS})
- set(COMMON_LIBRARIES ${COMMON_LIBRARIES} ${ZLIB_LIBRARIES})
-else()
- message(STATUS "zlib NOT found, using bundled miniz for compression")
- if(${CMAKE_SIZEOF_VOID_P} EQUAL 4)
- message(STATUS "WARNING: This may be slow on 32 bit systems!")
- endif()
+# Needed to compile with mingw without kde
+if (MINGW AND NOT KDE4_FOUND)
+ add_definitions(-D_WIN32_WINNT=0x0500)
+ message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
+ # workaround for bug in mingw gcc 4.0
+ add_definitions(-U__STRICT_ANSI__)
+endif()
+
+# Sanitize compiler flags - old versions of KDE set -ansi, which breaks -std=c++11
+if (CMAKE_COMPILER_IS_GNUCXX)
+ string(REPLACE "-ansi" "" CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS})
+endif()
+
+
+# Setup KDE / KDE Frameworks
+#####################################################################
+
+# We want to do this up here, so we have the necessary variables and defines set before
+# compiling anything
+
+if (KDE4_FOUND)
+ # We always use external icons for KDE4 support, since we use its iconloader rather than Qt's
+ set(EMBED_DATA OFF)
+
+ # Better have the compile flags global, even for the core, to avoid problems with linking the mono client
+ add_definitions(-DHAVE_KDE -DHAVE_KDE4 ${KDE4_DEFINITIONS})
+ set(WITH_KDE4 TRUE)
endif()
+if (USE_QT5 AND WITH_KDE)
+ # If KDE Frameworks are present, they're most probably providing Qt5 integration including icon loading
+ set(EMBED_DATA OFF)
-# Execinfo is needed for generating backtraces
-find_package(ExecInfo)
-if(EXECINFO_FOUND)
- add_definitions(-DHAVE_EXECINFO)
- include_directories(${EXECINFO_INCLUDES})
- link_libraries(${EXECINFO_LIBRARIES})
-endif(EXECINFO_FOUND)
+ include(KDEInstallDirs)
+ include(KDECompilerSettings)
+ include(KDECMakeSettings)
+ add_definitions(-DHAVE_KDE -DHAVE_KF5)
+ set(WITH_KF5 TRUE)
+endif()
+
+# This needs to come after setting up KDE integration, so we can use KDE-specific paths
+include(QuasselInstallDirs)
-# PkgConfig isn't strictly required.
-# However, some optional deps might not be found if it's not present, so warn!
-find_package(PkgConfig)
-if(NOT PKG_CONFIG_FOUND)
- message(STATUS "WARNING: PkgConfig not available! Some dependencies for optional features might not be found.")
- message(STATUS " Affected features might include encryption support, DBus menus and Ayatana notifications.")
-endif(NOT PKG_CONFIG_FOUND)
+# Various config-dependent checks and settings
+#####################################################################
+if (NOT ZLIB_FOUND)
+ message(STATUS "zlib NOT found, using bundled miniz for compression")
+ if (${CMAKE_SIZEOF_VOID_P} EQUAL 4)
+ message(STATUS "WARNING: This may be slow on 32 bit systems!")
+ endif()
+endif()
-# Setup OpenSSL
-# We don't link to or include OpenSSL ourselves, but use exclusively the Qt API.
-# Thus, we simply check if OpenSSL support is present in Qt's config and enable our
-# own SSL stuff in this case. Qt should care for adding what it needs itself.
-if(WITH_OPENSSL)
- if(QT_QCONFIG MATCHES "openssl")
- message(STATUS "Found OpenSSL support in Qt, enabling SSL")
+if (HAVE_SSL)
add_definitions(-DHAVE_SSL)
- set(HAVE_SSL true)
- else(QT_QCONFIG MATCHES "openssl")
- message(STATUS "No OpenSSL support found in Qt, disabling SSL")
- add_definitions(-DQT_NO_OPENSSL)
- endif(QT_QCONFIG MATCHES "openssl")
-else(WITH_OPENSSL)
- message(STATUS "Not enabling OpenSSL support")
-endif(WITH_OPENSSL)
-
-
-# Check for GUI specific stuff
-if(BUILD_GUI)
-
- # Setup D-Bus support
- if(WITH_DBUS)
- if(WITH_QT5)
- find_package(Qt5DBus ${QT_MIN_VERSION})
- find_package(Qt5DBusTools)
- endif(WITH_QT5)
-
- if(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
- message(STATUS "Found QtDBus, enabling D-Bus support")
- add_definitions(-DHAVE_DBUS)
- set(HAVE_DBUS true)
- set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} DBus)
-
- # check if we have dbusmenu as well
- if(NOT WITH_QT5)
- find_package(DBusMenuQt)
- if(DBUSMENUQT_FOUND)
- message(STATUS "Enabling support for exporting the tray menu via D-Bus")
- add_definitions(-DHAVE_DBUSMENU)
- include_directories(${DBUSMENUQT_INCLUDE_DIR})
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${DBUSMENUQT_LIBRARIES})
- set(CLIENT_COMPILE_FLAGS "${CLIENT_COMPILE_FLAGS} ${DBUSMENUQT_DEFINITIONS}")
- else(DBUSMENUQT_FOUND)
- message(STATUS "Disabling support for exporting the tray menu via D-Bus")
- endif(DBUSMENUQT_FOUND)
- endif(NOT WITH_QT5)
-
- else(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
- message(STATUS "QtDBus not found, disabling D-Bus support")
- endif(QT_QTDBUS_FOUND OR (Qt5DBus_FOUND AND Qt5DBusTools_FOUND))
- else(WITH_DBUS)
- message(STATUS "Not enabling D-Bus support")
- endif(WITH_DBUS)
-
- # Setup QtWebkit support
- if(WITH_WEBKIT)
- if(WITH_QT5)
- find_package(Qt5Webkit ${QT_MIN_VERSION} QUIET)
- endif(WITH_QT5)
- if(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
- message(STATUS "Found QtWebKit, enabling WebKit support")
- add_definitions(-DHAVE_WEBKIT)
- set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} Webkit XmlPatterns)
- set(HAVE_WEBKIT true)
- else(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
- message(STATUS "QtWebkit not found, disabling Webkit support")
- endif(QT_QTWEBKIT_FOUND OR Qt5Webkit_FOUND)
- else(WITH_WEBKIT)
- message(STATUS "Not enabling Webkit support")
- endif(WITH_WEBKIT)
-
- # Setup KDE4 support
- if(WITH_KDE AND NOT WITH_QT5)
- # KDE has overzealous CFLAGS making miniz not compile, so save our old flags
- set(_cflags ${CMAKE_C_FLAGS})
- find_package(KDE4)
- if(KDE4_FOUND)
- message(STATUS "Enabling KDE4 integration")
- include_directories(${KDE4_INCLUDES})
- add_definitions(-DHAVE_KDE ${KDE4_DEFINITIONS})
- set(HAVE_KDE 1)
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${KDE4_KDECORE_LIBS} ${KDE4_KDEUI_LIBRARY} ${KDE4_SOLID_LIBS} ${KDE4_KNOTIFYCONFIG_LIBRARY})
- # We always use external icons for KDE4 support, since we use its iconloader rather than our own
- set(EMBED_DATA OFF)
- # Restore our old CFLAGS
- set(CMAKE_C_FLAGS ${_cflags})
- else(KDE4_FOUND)
- message(STATUS "KDE4 not found, disabling KDE integration")
- endif(KDE4_FOUND)
- else(WITH_KDE AND NOT WITH_QT5)
- message(STATUS "Not enabling KDE4 integration")
- endif(WITH_KDE AND NOT WITH_QT5)
-
- # Setup Phonon support - we only need this if we don't have or want KDE4
- if(NOT HAVE_KDE)
- if(WITH_PHONON)
- if(WITH_QT5)
- find_package(Qt5phonon)
- if(Qt5phonon_FOUND)
- message(STATUS "Enabling Phonon support")
- add_definitions(-DHAVE_PHONON)
- set(HAVE_PHONON true)
- set(CLIENT_QT_MODULES ${CLIENT_QT_MODULES} phonon)
- else(Qt5phonon_FOUND)
- message(STATUS "Phonon not found, disabling audio notifications")
- endif(Qt5phonon_FOUND)
- else(WITH_QT5)
- find_package(Phonon)
- if(PHONON_FOUND)
- message(STATUS "Enabling Phonon support")
- add_definitions(-DHAVE_PHONON)
- include_directories(${PHONON_INCLUDES})
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${PHONON_LIBS})
- set(HAVE_PHONON true)
- else(PHONON_FOUND)
- message(STATUS "Phonon not found, disabling audio notifications")
- endif(PHONON_FOUND)
- endif(WITH_QT5)
- else(WITH_PHONON)
- message(STATUS "Not enabling Phonon support")
- endif(WITH_PHONON)
-
- find_package(Libsnore)
- if(LIBSNORE_FOUND)
- add_definitions(-DHAVE_LIBSNORE)
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${LIBSNORE_LIBRARIES})
- set(HAVE_SNORENOTIFY true)
- endif(LIBSNORE_FOUND)
- endif(NOT HAVE_KDE)
-
- # Setup libindicate-qt support
- if(WITH_LIBINDICATE AND NOT WITH_QT5)
- pkg_check_modules(INDICATEQT QUIET indicate-qt>=0.2.1)
- if(INDICATEQT_FOUND)
- message(STATUS "Enabling Ayatana notification support")
- set(HAVE_INDICATEQT true)
- add_definitions(-DHAVE_INDICATEQT)
- link_directories(${INDICATEQT_LIBRARY_DIRS})
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES} ${INDICATEQT_LIBRARIES})
- else(INDICATEQT_FOUND)
- message(STATUS "Disabling Ayatana notification support")
- endif(INDICATEQT_FOUND)
- else(WITH_LIBINDICATE AND NOT WITH_QT5)
- message(STATUS "Not enabling Ayatana notification support")
- # We don't want to link against it even if another package has found it
- set(INDICATEQT_LIBRARIES "")
- endif(WITH_LIBINDICATE AND NOT WITH_QT5)
-
- # Setup OS X notification center support
- if(WITH_NOTIFICATION_CENTER AND APPLE)
- set(HAVE_NOTIFICATION_CENTER true)
- add_definitions(-DHAVE_NOTIFICATION_CENTER)
- set(CLIENT_LIBRARIES ${CLIENT_LIBRARIES}
- /System/Library/Frameworks/Foundation.framework
- )
- endif()
-endif(BUILD_GUI)
-
-# Core-only deps
-if(BUILD_CORE)
-
- # Setup encryption support
- if(WITH_CRYPT AND NOT WITH_QT5)
- find_package(QCA2)
- if(QCA2_FOUND)
- message(STATUS "Enabling encryption support")
- add_definitions(-DHAVE_QCA2)
- set(LINK_QCA2 QCA2)
- set(HAVE_QCA2 true)
- set(MOC_DEFINES ${MOC_DEFINES} -DHAVE_QCA2)
- else(QCA2_FOUND)
- message(STATUS "Disabling encryption support")
- endif(QCA2_FOUND)
- else(WITH_CRYPT AND NOT WITH_QT5)
- message(STATUS "Not enabling encryption support")
- endif(WITH_CRYPT AND NOT WITH_QT5)
-
- # Setup syslog support
- if(WITH_SYSLOG)
- check_include_file(syslog.h HAVE_SYSLOG_H)
- if(HAVE_SYSLOG_H)
- message(STATUS "Enabling syslog support")
- set(HAVE_SYSLOG true)
- add_definitions(-DHAVE_SYSLOG)
- else(HAVE_SYSLOG_H)
- message(STATUS "Disabling syslog support")
- endif(HAVE_SYSLOG_H)
- else(WITH_SYSLOG)
- message(STATUS "Not enabling syslog support")
- endif(WITH_SYSLOG)
-
-endif(BUILD_CORE)
-
-
-# Various settings
-##################
-
-# needed to compile with mingw without kde
-if(MINGW AND NOT HAVE_KDE)
- add_definitions(-D_WIN32_WINNT=0x0500)
- message(STATUS "Added _WIN32_WINNT=0x0500 definition for MinGW")
-# workaround for bug in mingw gcc 4.0
- add_definitions(-U__STRICT_ANSI__)
-endif(MINGW AND NOT HAVE_KDE)
-
-# Now set up install locations; those are set by KDE if integration is enabled
-if(NOT HAVE_KDE)
- if(WIN32)
- set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE FILEPATH "Install path for binaries")
- set(DATA_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/apps CACHE FILEPATH "Install path for data files")
- set(ICON_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/icons CACHE FILEPATH "Global icon install path")
- set(XDG_APPS_INSTALL_DIR $ENV{APPDATA}/quassel-irc.org/share/applications CACHE FILEPATH "Install path for .desktop files")
- else(WIN32)
- set(BIN_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/bin CACHE FILEPATH "Install path for binaries")
- set(DATA_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/apps CACHE FILEPATH "Install path for data files")
- set(ICON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/icons CACHE FILEPATH "Global icon install path")
- set(XDG_APPS_INSTALL_DIR ${CMAKE_INSTALL_PREFIX}/share/applications CACHE FILEPATH "Install path for .desktop files")
- endif(WIN32)
-endif(NOT HAVE_KDE)
-
-if(EMBED_DATA)
- message(STATUS "Embedding data files into the binary")
-else(EMBED_DATA)
- message(STATUS "Installing data files separately")
-endif(EMBED_DATA)
-
-# RPATH needs to be set correctly
-# Do this down here, since otherwise KDE wants to handle it itself, and fails
-set(CMAKE_INSTALL_RPATH_USE_LINK_PATH 1)
-set(CMAKE_BUILD_WITH_INSTALL_RPATH 1)
-
-# Set global buildflags
-# This is very much non-portable, so don't use -DSTATIC until you know what
-# you do.
+endif()
+add_feature_info("SSL support in Qt" HAVE_SSL "Use secure network connections")
+
+# Check for syslog support
+if (NOT WIN32)
+ check_include_file(syslog.h HAVE_SYSLOG)
+ add_feature_info("syslog.h" HAVE_SYSLOG "Provide support for logging to the syslog")
+endif()
+
+add_feature_info("Qt Linguist Tools" QT_LCONVERT_EXECUTABLE "Translation support for Quassel")
+
+if (EMBED_DATA)
+ message(STATUS "Embedding data files into the binary")
+else()
+ message(STATUS "Installing data files separately")
+endif()
+
+if (INDICATEQT_FOUND)
+ add_definitions(-DXDG_APPS_INSTALL_DIR=${CMAKE_INSTALL_APPDIR})
+endif()
+
+if (NOT WIN32)
+ check_function_exists(umask HAVE_UMASK)
+ if(HAVE_UMASK)
+ add_definitions(-DHAVE_UMASK)
+ endif(HAVE_UMASK)
+endif()
+
+
+# Windows-specific stuff
+#####################################################################
+
+if (WIN32)
+ link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
+ if (MSVC)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /DNOMINMAX")
+ set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
+ set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
+ link_libraries(Version dwmapi shlwapi)
+ if (USE_QT5)
+ set(QT_QTMAIN_LIBRARY Qt5::WinMain)
+ endif()
+ endif()
+ if(HAVE_SSL AND STATIC)
+ find_package(OpenSSL REQUIRED)
+ link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
+ endif()
+endif()
+
+
+# Static builds (very much non-portable, so don't use -DSTATIC
+# unless you know what you do!)
+#####################################################################
+
if(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
- set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
- link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
- if(HAVE_SSL)
- set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
- endif(HAVE_SSL)
-endif(STATIC AND CMAKE_COMPILER_IS_GNUCXX)
-
-if(WIN32)
- link_libraries(imm32 winmm dbghelp Secur32) # missing by default :/
- if(MSVC)
- set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBUGINFO "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt /DEFAULTLIB:msvcrt")
- set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/debug /INCREMENTAL:YES /NODEFAULTLIB:libcmt")
- set(CMAKE_EXE_LINKER_FLAGS_DEBUGFULL "${CMAKE_EXE_LINKER_FLAGS_DEBUG}")
- link_libraries(Version dwmapi shlwapi)
- endif(MSVC)
- if(HAVE_SSL AND STATIC)
- find_package(OpenSSL REQUIRED)
- link_libraries(${OPENSSL_LIBRARIES} ${OPENSSL_EAY_LIBRARIES})
- endif(HAVE_SSL AND STATIC)
-endif(WIN32)
-
-if(HAVE_INDICATEQT)
- add_definitions(-DXDG_APPS_INSTALL_DIR=${XDG_APPS_INSTALL_DIR})
-endif(HAVE_INDICATEQT)
-
-if(NOT WIN32)
- check_function_exists(umask HAVE_UMASK)
- if(HAVE_UMASK)
- add_definitions(-DHAVE_UMASK)
- endif(HAVE_UMASK)
-endif(NOT WIN32)
+ set(CMAKE_CXX_FLAGS "-static-libgcc ${CMAKE_CXX_FLAGS}")
+ link_directories(${CMAKE_BINARY_DIR}/staticlibs) # override dynamic libs
+ if (HAVE_SSL)
+ set(QUASSEL_SSL_LIBRARIES ssl crypto) # these miss in static builds
+ endif()
+endif()
+
# Generate version information from Git
+#####################################################################
+
include(GetGitRevisionDescription)
get_git_head_revision(GIT_REFSPEC GIT_HEAD)
git_describe(GIT_DESCRIBE --long)
+# If not in a Git repo try to read GIT_HEAD and GIT_DESCRIBE from
+# enviroment
+if (NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+ if (DEFINED ENV{GIT_HEAD})
+ set(GIT_HEAD $ENV{GIT_HEAD})
+ endif ()
+ if (DEFINED ENV{GIT_DESCRIBE})
+ set(GIT_DESCRIBE $ENV{GIT_DESCRIBE})
+ endif()
+endif()
+
# Sanitize things if we're not in a Git repo
-if(NOT GIT_HEAD OR NOT GIT_DESCRIBE)
+if (NOT GIT_HEAD OR NOT GIT_DESCRIBE)
set(GIT_HEAD "")
set(GIT_DESCRIBE "")
endif()
configure_file(version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
+# Prepare the build
+#####################################################################
+
# These variables will be added to the main targets (CORE, QTCLIENT, MONO)
set(COMMON_DEPS ${RC_WIN32})
set(CORE_DEPS )
add_subdirectory(icons)
add_subdirectory(pics)
add_subdirectory(po)
+
+
+# Set up and display feature summary
+#####################################################################
+
+feature_summary(WHAT ALL
+ INCLUDE_QUIET_PACKAGES
+ FATAL_ON_MISSING_REQUIRED_PACKAGES
+)
+
+# Finally, compile the sources
+# We want this after displaying the feature summary to avoid ugly
+# CMake backtraces in case a required Qt5 module is missing
+#####################################################################
+
add_subdirectory(src)